GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 13632.2-2006 |
Measurements for monitoring adequate cooling within the core of pressurized liGHt water reactors Part 2: Instrumentation requirements during cold shutdown 监督压水堆堆芯充分冷却的测量要求 第2部分:冷停堆期间监测仪表的要求 |
China National Standards GH |
English PDF |
GB/T 6060.2-2006 |
RouGHness comparison specimens - Ground, turned, bored, milled, shaped and planed 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 |
China National Standards GH |
English PDF |
GB/T 10922-2006 |
Gauges for pipe threads with 55 degree thread angle where pressure-tiGHt joints are not made on the threads 55°非密封管螺纹量规 |
China National Standards GH |
English PDF |
GB/T 10919-2006 |
Gauges for straiGHt-sided splines 矩形花键量规 |
China National Standards GH |
English PDF |
GB 15629.1104-2006 |
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Further HiGHer 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4GHz频段更高数据速率扩展规范 |
China National Standards GH |
English PDF |
GB 15629.1101-2006 |
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: HiGH-Speed Phy 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:5.8GHz频段高速物理层扩展规范 |
China National Standards GH |
English PDF |
GB/T 3932.2-2006 |
Test conditions for manually controlled milling machines with table of fixed heiGHt - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards GH |
English PDF |
GB/T 3932.1-2006 |
Test conditions for manually controlled milling machines with table of fixed heiGHt - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards GH |
English PDF |
GB/T 20089-2006 |
Machinery and equipment for working the soil - Mouldboard plouGH working elements - Vocabulary 土壤耕作机械 铧式犁工作部件 词汇 |
China National Standards GH |
English PDF |
GB/T 20174-2006 |
Petroleum and natural gas industries - Drilling and production equipment - Drill-throuGH equipment 石油天然气工业 钻井和采油设备 钻通设备 |
China National Standards GH |
English PDF |
GB/T 19975-2005 |
Test method of tensile properties for hiGH tenacity filament yarn 高强化纤长丝拉伸性能试验方法 |
China National Standards GH |
English PDF |
GB/T 6509-2005 |
Method for determination on of low molecular weiGHt compounds content in chip and fibles of polycaproamide 聚己内酰胺切片和纤维中低分子物含量的测定方法 |
China National Standards GH |
English PDF |
GB/T 20037-2005 |
Textile machinery -- Dyeing and finishing machines -- Definition of left and riGHt sides 纺织机械 染整机器 左右侧定义 |
China National Standards GH |
English PDF |
GB/T 19954.2-2005 |
Electromagnetic compatibility-Product family standard for audio,video,audio-visual and entertainment liGHting control apparatus for professional use Part 2.Immunity 电磁兼容 专业用途的音频、视频、音视频和娱乐场所灯光控制设备产品类标准 第2部分: 抗扰度 |
China National Standards GH |
English PDF |
GB/T 19954.1-2005 |
Electromagnetic compatibility-Product family standard for audio,video,audio-visual and entertainment liGHting control apparatus for professional usePart 1.Emission 电磁兼容 专业用途的音频、视频、音视频和娱乐场所灯光控制设备的产品类标准 第1部分 发射 |
China National Standards GH |
English PDF |
GB/T 12419-2005 |
Classification,equipment and installation of hiGHway inland container depot 集装箱公路中转站级别划分、设备配备及建设要求 |
China National Standards GH |
English PDF |
GB 6969-2005 |
Rubber suction hose for fire-fliGHting purpose 消防吸水胶管 |
China National Standards GH |
English PDF |
GB/T 3903.9-2005 |
Footwear-Test methods for insoles-Heel pin holding strenGH 鞋类-内底试验方法-跟部持钉力 |
China National Standards GH |
English PDF |
GB/T 3903.12-2005 |
Footwear-Test methods for outsoles-Tear strenGH 鞋类-外底试验方法-撕裂强度 |
China National Standards GH |
English PDF |
GB/T 19919-2005 |
Small craft-Windows,portliGHts,hatches,deadlights and doors Strength and watertightness requirements 小艇 窗、舷窗、舱口盖、风暴盖和门 强度和密封性要求 |
China National Standards GH |
English PDF |
GB/T 19890-2005 |
Acoustics-HiGH intensity focused ultrasound(HIFU)measurements of acoustic power and field characteristics 声学 高强度聚焦超声(HIFU)声功率和声场特性的测量 |
China National Standards GH |
English PDF |
GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straiGHt pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分:尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards GH |
English PDF |
GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow throuGH control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards GH |
English PDF |
GB/T 17213.12-2005 |
Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straiGHt pattern control valves 工业过程控制阀 第3-3部分:尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards GH |
English PDF |
GB/T 14614.4-2005 |
Determination of rheological properties of douGH using alveograph 小麦粉面团流变特性测定 吹泡仪法 |
China National Standards GH |
English PDF |
GB/T 8381.11-2005 |
Determination of Amprolium in Feeds-HiGH Performance Liquid Chromatography 饲料中盐酸氨丙啉的测定-高效液相色谱法 |
China National Standards GH |
English PDF |
GB/T 8381.10-2005 |
Determination of Sulfaquinoxaline in feeds HiGH-performance Liquid chromatography 饲料中磺胺喹恶啉的测定-高效液相色谱法 |
China National Standards GH |
English PDF |
GB 4715-2005 |
Smoke detectors-Point detectors using scattered liGHt,transmitted light or ionization 点型感烟火灾探测器 |
China National Standards GH |
English PDF |
GB 14003-2005 |
Smoke detectors-Line detectors using an optical liGHt beam 线型光束感烟火灾探测器 |
China National Standards GH |
English PDF |
GB/T 772-2005 |
Technical specifications of porcelain element for hiGH voltage insulators 高压绝缘子瓷件 技术条件 |
China National Standards GH |
English PDF |
GB/T 1094.4-2005 |
Power transformers-Part 4:Guide to the liGHtning impulse and switching impulse testing-Power transformers and reactors 电力变压器 第4部分:电力变压器和电抗器的雷电冲击和操作冲击试验导则 |
China National Standards GH |
English PDF |
GB/T 19856.2-2005 |
LiGHtning protection-Telecommunication lines-Part 2:Lines using metallic conductors 雷电防护 通信线路 第2部分:金属导线 |
China National Standards GH |
English PDF |
GB/T 19856.1-2005 |
LiGHtning protection-Telecommunication lines-Part 1:Fibre optic Installation 雷电防护 通信线路 第1部分:光缆 |
China National Standards GH |
English PDF |
GB/T 19271.4-2005 |
Protection against liGHtning electromagnetic impulse(LEMP)-Part 4:Protection of equipment in existing structures 雷电电磁脉冲的防护 第4部分:现有建筑物内设备的防护 |
China National Standards GH |
English PDF |
GB/T 19271.3-2005 |
Protection against liGHtning electromagnetic impulse(LEMP)-Part 3:Requirements of surge protective devices(SPDs) 雷电电磁脉冲的防护 第3部分:对浪涌保护器的要求 |
China National Standards GH |
English PDF |
GB/T 19271.2-2005 |
Protection against liGHtning electromagnetic impulse(LEMP)-Part 2:Shielding of structures,bonding inside structures and earthing 雷电电磁脉冲的防护 第2部分:建筑物的屏蔽、内部等电位连接及接地 |
China National Standards GH |
English PDF |
GB/T 6730.61-2005 |
Iron ores-Determination of carbon and sulfur content-HiGH frequency combustion with infrared absorption method 铁矿石 碳和硫含量的测定 高频燃烧红外吸收法 |
China National Standards GH |
English PDF |
GB/T 14992-2005 |
Classification and designation for superalloys and hiGH temperature intermetallic materials 高温合金和金属间化合物高温材料的分类和牌号 |
China National Standards GH |
English PDF |
GB 18458.3-2005 |
Special infusion sets-Part 3:LiGHt-resistant infusion sets for single use 专用输液器 第3部分:一次性使用避光输液器 |
China National Standards GH |
English PDF |
GB 9993-2005 |
Food additive SorGHum pigment 食品添加剂 高梁红 |
China National Standards GH |
English PDF |
GB/T 19755-2005 |
Measurement Methods for Emissions from LiGHt-duty Hybrid Electric Vehicles 轻型混合动力电动汽车 污染物排放测量方法 |
China National Standards GH |
English PDF |
GB/T 12217-2005 |
Machines-Shaft heiGHts 机器 轴高 |
China National Standards GH |
English PDF |
GB/T 10081-2005 |
StraiGHt-sided internal splines Length series 矩形内花键 长度系列 |
China National Standards GH |
English PDF |
GB/T 19744-2005 |
Determining of plane-strain crack-arrest fracture touGHness,K Ia,for ferritic Steels 铁素体钢平面应变止裂韧度 K Ia 试验方法 |
China National Standards GH |
English PDF |
GB/T 12553-2005 |
Fire performance requirements and test methods for fire fiGHt vessels 消防船消防性能要求和试验方法 |
China National Standards GH |
English PDF |
GB/T 19681-2005 |
The method for the determination of Sudan dyes in foods-HiGH performance liquid chromatography 食品中苏丹红染料的检测方法 高效液相色谱法 |
China National Standards GH |
English PDF |
GB/T 19701.2-2005 |
Implants for surgery Ultra-hiGH molecular weight polyethylene-part 2:Moulded forms 外科植入物 超高分子量聚乙烯 第2部分:模塑料 |
China National Standards GH |
English PDF |
GB/T 19701.1-2005 |
Implants for surgery-Ultra-hiGH molecular weight polyethylene part 1:powder form 外科植入物 超高分子量聚乙烯 第1部分:粉料 |
China National Standards GH |
English PDF |
GB/T 10335.2-2005 |
Coated paper and board-LiGHt weight coated paper 涂布纸和纸板 轻量涂布纸 |
China National Standards GH |
English PDF |
GB/T 19684-2005 |
Determination of chlortetracycline in feeds-HiGH performance liquid chromatography 饲料中金霉素的测定 高效液相色谱法 |
China National Standards GH |
English PDF |
GB/T 2423.33-2005 |
Environmental testing for electric and electronic products Part 2:Test Method Test Kca:HiGH concentration sulfur dioxide 电工电子产品环境试验 第2部分:试验方法 试验Kca:高浓度二氧化硫试验 |
China National Standards GH |
English PDF |
GB/T 16896.1-2005 |
Instruments and software used for measurements in hiGH-voltage impulse tests Part 1:requirements for instruments 高电压冲击测量仪器和软件 第一部分:对仪器的要求 |
China National Standards GH |
English PDF |
GB/T 19663-2005 |
Terms for LiGHtning Protection of Information system 信息系统雷电防护术语 |
China National Standards GH |
English PDF |
GB/T 19631-2005 |
Glassfiber reinforced cement liGHtweight hollow panel for partition 玻璃纤维增强水泥轻质多孔隔墙条板 |
China National Standards GH |
English PDF |
GB/T 13259-2005 |
HiGH Pressure Sodium Lamps 高压钠灯 |
China National Standards GH |
English PDF |
GB 7000.7-2005 |
Safety requirements for floodliGHts 投光灯具安全要求 |
China National Standards GH |
English PDF |
GB 19510.7-2005 |
Lamp controlgear--Part 7:Particular requirements for d.c.supplied electronic ballasts for aircraft liGHting 灯的控制装置 第7部分:航空器照明用直流电子镇流器的特殊要求 |
China National Standards GH |
English PDF |
GB 19510.6-2005 |
Lamp controlgear--Part 6:Particular requirements for d.c.supplied electronic ballasts for public transport liGHting 灯的控制装置 第6部分:公共交通运输工具照明用直流电子镇流器的特殊要求 |
China National Standards GH |
English PDF |
GB 19510.5-2005 |
Lamp controlgear--Part 5:Particular requirements for d.c.supplied electronic ballasts for general liGHting 灯的控制装置 第5部分:普通照明用直流电子镇流器的特殊要求 |
China National Standards GH |
English PDF |
GB/T 19621-2004 |
Labor force quota for liGHtrail engineering in city transit system 城市轨道交通轻轨工程劳动定员定额 |
China National Standards GH |
English PDF |
GB/T 7220-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--SurfacerouGHness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards GH |
English PDF |
GB/T 11336-2004 |
Measurement of departures from straiGHtness 直线度误差检测 |
China National Standards GH |
English PDF |
GB/T 19599.1-2004 |
Testing method for fishing nets of synthetic fibre--WeiGHt of netting 合成纤维渔网片试验方法 网片重量 |
China National Standards GH |
English PDF |
GB 19574-2004 |
Limited values of energy efficiency and evaluating values of energy conservation of ballast for hiGH-pressure sodium lamps 高压钠灯用镇流器能效限定值及节能评价值 |
China National Standards GH |
English PDF |
GB 19573-2004 |
Limited values of energy efficiency and rating criteria for hiGH-pressure sodium vapour lamps 高压钠灯能效限定值及能效等级 |
China National Standards GH |
English PDF |
GB/T 6420-2004 |
FreiGHt trailer series pedigree 货运挂车系列型谱 |
China National Standards GH |
English PDF |
GB/T 19566-2004 |
Technical regulations for sugarcane hiGH yield cultivation in dry-farmland 旱地糖料甘蔗高产栽培技术规程 |
China National Standards GH |
English PDF |
GB/T 19556-2004 |
Textile machinery and accessories--Pirn winders and cross winders--Definition of left and riGHt sides 纺织机械与附件 卷纬机和交叉卷绕络筒机 左右侧定义 |
China National Standards GH |
English PDF |
GB/T 19550-2004 |
Textile machinery and accessories--Preparing machinery of warp for weaving--Definition of left and riGHt sides 纺织机械与附件 织造前经纱准备机械 左右侧定义 |
China National Standards GH |
English PDF |
GB/T 19549-2004 |
Textile machinery and accessories--Spinning machinery--Definition of left and riGHt sides 纺织机械与附件 纺部机械 左右侧定义 |
China National Standards GH |
English PDF |
GB/T 19548-2004 |
Textile machinery and accessories--Weaving looms--Definition of left and riGHt sides 纺织机械与附件 织机 左右侧定义 |
China National Standards GH |
English PDF |
GB/T 4549.11-2004 |
Railway vehicle vocabulary--Part 11:Equipments attached to the special purpose freiGHt car 铁道车辆词汇 第11部分:专用货车附属设备 |
China National Standards GH |
English PDF |
GB/T 9843-2004 |
Specifications for urea hiGH pressure scrubber 尿素高压洗涤器技术条件 |
China National Standards GH |
English PDF |
GB/T 8910.2-2004 |
Hand-held portable power tools--Measurement of vibrations at the handle Part 2:ChippinGHammers and riveting hammers 手持便携式动力工具 手柄振动测量方法 第2部分:铲和铆钉机 |
China National Standards GH |
English PDF |
GB/T 10476-2004 |
Specifications for urea hiGH pressure condenser 尿素高压冷凝器技术条件 |
China National Standards GH |
English PDF |
GB/T 4585-2004 |
Artificial pollution tests on hiGH-voltage insulators to be used on a.c. systems 交流系统用高压绝缘子的人工污秽试验 |
China National Standards GH |
English PDF |
GB 3804-2004 |
HiGH-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV 3.6 kV~40.5 kV 高压交流负荷开关 |
China National Standards GH |
English PDF |
GB/T 2900.65-2004 |
Electrotechnical terminology--LiGHting 电工术语 照明 |
China National Standards GH |
English PDF |
GB/T 19496-2004 |
Determinating of the compressive strength of spun hiGH-strength concrete cores 钻芯检测离心高强混凝土抗压强度试验方法 |
China National Standards GH |
English PDF |
GB/T 4297-2004 |
Inspection method for macrostructure of wrouGHt magnesium alloy products 变形镁合金低倍组织检验方法 |
China National Standards GH |
English PDF |
GB/T 4296-2004 |
Inspection method for microstructure of wrouGHt magnesium alloy 变形镁合金显微组织检验方法 |
China National Standards GH |
English PDF |
GB/T 19479-2004 |
Good manufacturing practice for pig slauGHting 生猪屠宰良好操作规范 |
China National Standards GH |
English PDF |
GB/T 19478-2004 |
Operating procedure of chicken slauGHtering 肉鸡屠宰操作规程 |
China National Standards GH |
English PDF |
GB/T 19477-2004 |
Operating procedures of cattle slauGHtering 牛屠宰操作规程 |
China National Standards GH |
English PDF |
GB/T 1634.3-2004 |
Plastics--Determination of temperature of deflection under load--Part 3:HiGH-strength thermosetting laminates 塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料 |
China National Standards GH |
English PDF |
GB/T 19471.2-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktiGHtness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards GH |
English PDF |
GB/T 19471.1-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktiGHness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards GH |
English PDF |
GB/T 17980.83-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 83:Fungicides against brown bliGHt of tea 农药 田间药效试验准则(二) 第83部分:杀菌剂防治茶云纹叶枯病 |
China National Standards GH |
English PDF |
GB/T 17980.82-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 82:Fungicides against blister bliGHt of tea 农药 田间药效试验准则(二) 第82部分:杀菌剂防治茶饼病 |
China National Standards GH |
English PDF |
GB/T 17980.107-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 107:Fungicides against northern leaf bliGHt and southern leaf blight spot of corn 农药 田间药效试验准则(二) 第107部分:杀菌剂防治玉米大小斑病 |
China National Standards GH |
English PDF |
GB/T 17980.100-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 100:Fungicides against downy bliGHt of litchi 农药 田间药效试验准则(二) 第100部分:杀菌剂防治荔枝霜疫霉病 |
China National Standards GH |
English PDF |
GB 19442-2004 |
Technique requirement for prevention and control of hiGHly pathogenic avian influenza 高致病性禽流感防治技术规范 |
China National Standards GH |
English PDF |
GB 19441-2004 |
Quarantine requirement of entry-exit avian and its products for hiGHly pathogenic avian influenza 进出境禽鸟及其产品高致病性禽流感检疫规范 |
China National Standards GH |
English PDF |
GB/T 6091-2004 |
Knife straiGHt edge 刀口形直尺 |
China National Standards GH |
English PDF |
GB/T 4211.2-2004 |
HiGH speed steel tool bits--Part 2:Technical requirements 高速钢车刀条 第2部分:技术条件 |
China National Standards GH |
English PDF |
GB/T 4211.1-2004 |
HiGH speed steel tool bits--Part 1:Types and dimensions 高速钢车刀条 第1部分:型式和尺寸 |
China National Standards GH |
English PDF |
GB/T 1819.1-2004 |
Methods for chemical analysisof tin concentrates--Determination of water content--The weiGHing method 锡精矿化学分析方法 水分量的测定 称量法 |
China National Standards GH |
English PDF |
GB/T 1819.10-2004 |
Methods for chemical analysis of tin concentrates--Determination of sulphur content--The hiGH frequency infrared absorption method and the combustion potassium iodate titrimetric method 锡精矿化学分析方法 硫量的测定 高频红外吸收法和燃烧-碘酸钾滴定法 |
China National Standards GH |
English PDF |
GB/T 19423-2003 |
Determination of nicarbazin in feed--HiGH performance liquid chromatography 饲料中尼卡巴嗪的测定 高效液相色谱法 |
China National Standards GH |
English PDF |
GB/T 19247.3-2003 |
Printed board assemblies--Part 3:Sectional specification--Requirements for throuGH-hole mount soldered assemblies 印制板组装 第3部分:分规范 通孔安装焊接组装的要求 |
China National Standards GH |
English PDF |
Find out:2865Items | To Page of: First -Previous-Next -Last | [20] [21] [22] [23] [24] [25] [26] |