GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 3475-2008 |
Requirement aNd test method for speed governing system of marine diesel engine 船用柴油机调速系统技术要求和试验方法 |
China National Standards Nd |
English PDF |
GB/T 21485-2008 |
Ships aNd marine technology - Shipboard plans for fire protection,life-saving appliances and means of escape 船舶和海上技术 船上消防、救生设备及逃生路线布置图 |
China National Standards Nd |
English PDF |
GB/T 11699-2008 |
Small craft with inboard engine - Propeller shaft eNds and bosses 舷内机小艇 螺旋桨轴端和桨毂 |
China National Standards Nd |
English PDF |
GB/T 21487.1-2008 |
Rotating shaft vibration measuring systems - Part 1: Relative aNd absolute sensing of radial vibration 转轴振动测量系统 第1部分:径向振动的相对和绝对检测 |
China National Standards Nd |
English PDF |
GB/T 1182-2008 |
Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location aNd run-out 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注 |
China National Standards Nd |
English PDF |
GB/T 4447-2008 |
Sea-going vessels-WiNdlasses and anchor capstans 海船用起锚机和起锚绞盘 |
China National Standards Nd |
English PDF |
GB/T 3893-2008 |
Shipbuilding aNd marine structures - Deck machinery - Vocabulary and symbols 造船及海上结构物 甲板机械 术语和符号 |
China National Standards Nd |
English PDF |
GB/T 21482-2008 |
Ships aNd marine technology - Pneumatic rubber fenders 船舶与海上技术 充气橡胶靠球 |
China National Standards Nd |
English PDF |
GB/T 21481.2-2008 |
Ships aNd marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation 船舶与海上技术 船舶和海上结构物上生活用水供应 第2部分: 计算方法 |
China National Standards Nd |
English PDF |
GB/T 21481.1-2008 |
Ships aNd marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design 船舶与海上技术 船舶和海上结构物上生活用水供应 第1部分: 规划和设计 |
China National Standards Nd |
English PDF |
GB/T 21480-2008 |
Ships aNd marine technology - Drain facilities from oil and water tanks 船舶与海上技术 油舱及水舱放泄装置 |
China National Standards Nd |
English PDF |
GB/T 21479.2-2008 |
Ships aNd marine technology-Propulsion plants for ships - Part 2:Vocabulary for controllable-pitch propeller plants 船舶与海上技术 船用推进装置 第2部分: 可调螺距螺旋桨装置词汇 |
China National Standards Nd |
English PDF |
GB/T 21479.1-2008 |
Ships aNd marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers 船舶与海上技术 船用推进装置 第1部分: 螺旋桨几何学词汇 |
China National Standards Nd |
English PDF |
GB/T 21478-2008 |
Ships aNd marine technology - Marine environment protection - Terminology relating to oil spill response 船舶与海上技术 海上环境保护 溢油处理相关术语 |
China National Standards Nd |
English PDF |
GB/T 21477-2008 |
Ships aNd marine technology - Fire resistance of hose assemblies - Test methods 船舶及海上技术 软管组件的耐火性能 试验方法 |
China National Standards Nd |
English PDF |
GB/T 21476-2008 |
Ships aNd marine technology - Fire resistance of hose assemblies - Requirements for the test bench 船舶与海上技术 软管组件的耐火性能 试验台要求 |
China National Standards Nd |
English PDF |
GB/T 21475-2008 |
Shipbuilding - Colours of iNdicator lights 造船 指示灯颜色 |
China National Standards Nd |
English PDF |
GB/T 16301-2008 |
Measurement aNd evaluation of vibration severity for marine engine-room auxiliaries 船舶机舱辅机振动烈度的测量和评价 |
China National Standards Nd |
English PDF |
GB/T 14090-2008 |
Terminology for offshore oil aNd gas development engineering 海上油气开发工程术语 |
China National Standards Nd |
English PDF |
GB/T 12928-2008 |
Marine reciprocating air compressor for medium pressure aNd low pressure 船用中低压活塞空气压缩机 |
China National Standards Nd |
English PDF |
GB/T 11035-2008 |
Marine electric two spiNdle screw pump 船用电动双螺杆泵 |
China National Standards Nd |
English PDF |
GB/T 10832-2008 |
General specification for centrifigual aNd vortex pumps of ship 船用离心泵、旋涡泵通用技术条件 |
China National Standards Nd |
English PDF |
GB/T 20485.22-2008 |
Methods for the calibration of vibration aNd shock transducers - Part 22: Shock calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第 22部分:冲击比较法校准 |
China National Standards Nd |
English PDF |
GB/T 20485.12-2008 |
Methods for the calibration of vibration aNd shock transducers - Part 12: Primary vibration calibration by the reciprocity method 振动与冲击传感器校准方法 第12部分:互易法振动绝对校准 |
China National Standards Nd |
English PDF |
GB/T 20485.1-2008 |
Methods for the calibration of vibration aNd shock transducers - Part 1: Basic concepts 振动与冲击传感器校准方法 第1部分: 基本概念 |
China National Standards Nd |
English PDF |
GB/T 3632-2008 |
Sets of torshear type high strength bolt hexagon nut aNd plain washer for steel structures 钢结构用扭剪型高强度螺栓连接副 |
China National Standards Nd |
English PDF |
GB/T 7813-2008 |
Rolling bearings - Split type plummer block housings - BouNdary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards Nd |
English PDF |
GB/T 6060.3-2008 |
Surface roughness comparison specimen - Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed aNd polished surface 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面 |
China National Standards Nd |
English PDF |
GB/T 5859-2008 |
Rolling bearings - Self -aligning thrust roller bearings - BouNdary dimensions 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards Nd |
English PDF |
GB/T 300-2008 |
Rolling bearings - Four row tapered roller bearings - BouNdary dimensions 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards Nd |
English PDF |
GB/T 299-2008 |
Rolling bearings - Double row tapered roller bearings - BouNdary dimensions 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards Nd |
English PDF |
GB/T 21472-2008 |
Stainless steel beNds and tees for the food industry 食品工业用不锈钢弯头和三通 |
China National Standards Nd |
English PDF |
GB/T 21471-2008 |
Machining allowances aNd tolerances for steel open die forgings on hammer - Shafts 锤上钢质自由锻件机械加工余量与公差 轴类 |
China National Standards Nd |
English PDF |
GB/T 21470-2008 |
Machining allowances aNd tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless cylindrical sleeves 锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类 |
China National Standards Nd |
English PDF |
GB/T 21469-2008 |
Machining allowances aNd tolerances for steel open die forgings on hammer - General requirement 锤上钢质自由锻件机械加工余量与公差 一般要求 |
China National Standards Nd |
English PDF |
GB/T 21468-2008 |
Pallet stackers aNd high-lift platform trucks - Stability tests 托盘堆垛车和高起升平台堆垛车 稳定性试验 |
China National Standards Nd |
English PDF |
GB/T 21467-2008 |
INdustrial trucks operating in special condition of stacking with mast titled forward - Additional stability test 工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验 |
China National Standards Nd |
English PDF |
GB/T 21466.3-2008 |
Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分:许用的运行参数 |
China National Standards Nd |
English PDF |
GB/T 21466.2-2008 |
Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分:计算过程中所用函数 |
China National Standards Nd |
English PDF |
GB/T 21466.1-2008 |
Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings -- Part 1: Calculation procedure 稳态条件下流体动压径向滑动轴承 圆柱滑动轴承 第1部分:计算过程 |
China National Standards Nd |
English PDF |
GB/T 19582.3-2008 |
Modbus iNdustrial automation network specification - Part 3: Modbus protocol implementation guide over TCP/IP 基于Modbus协议的工业自动化网络规范 第3部分:Modbus协议在TCP/IP上的实现指南 |
China National Standards Nd |
English PDF |
GB/T 19582.2-2008 |
Modbus iNdustrial automation network specification-Part 2:Modbus protocol implementation guide over serial link 基于Modbus协议的工业自动化网络规范 第2部分:Modbus协议在串行链路上的实现指南 |
China National Standards Nd |
English PDF |
GB/T 19582.1-2008 |
Modbus iNdustrial automation network specification - Part 1: Modbus application protocol 基于Modbus协议的工业自动化网络规范 第1部分:Modbus应用协议 |
China National Standards Nd |
English PDF |
GB/T 21474-2008 |
Guideline for the assessment on the reuse aNd recycling system of waste electrical and electronic equipment 废弃电子电气产品再使用及再生利用体系评价导则 |
China National Standards Nd |
English PDF |
GB/T 4649-2008 |
Ethylene glycol for iNdustrial Use-Specification 工业用乙二醇 |
China National Standards Nd |
English PDF |
GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding aNd extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Nd |
English PDF |
GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding aNd extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Nd |
English PDF |
GB/T 14571.4-2008 |
Ethylene glycol for iNdustrial use - Determination of ultraviolet transmittance - Ultraviolet spectrophotometric method 工业用乙二醇紫外透光率的测定 紫外分光光度法 |
China National Standards Nd |
English PDF |
GB/T 14571.3-2008 |
Ethylene glycol for iNdustrial use - Determination of content of total aldehydes present - Spectrophotometric method 工业用乙二醇中醛含量的测定 分光光度法 |
China National Standards Nd |
English PDF |
GB/T 14563-2008 |
Specification aNd test method of Kaolin clay 高岭土及其试验方法 |
China National Standards Nd |
English PDF |
GB/T 21457-2008 |
Cranes aNd related equipment - Accuracy requirements for measuring parameters during testing 起重机和相关设备 试验中参数的测量精度要求 |
China National Standards Nd |
English PDF |
GB 21454-2008 |
The minimum allowable values of the IPLV aNd energy efficiency grades for multi-connected air-condition(heat pump) unit 多联式空调(热泵)机组能效限定值及能源效率等级 |
China National Standards Nd |
English PDF |
GB/T 21437.2-2008 |
Road vehicles - Electrical disturbances from coNduction and coupling - Part 2: Electrical transient conduction along supply lines only 道路车辆 由传导和耦合引起的电骚扰 第2部分:沿电源线的电瞬态传导 |
China National Standards Nd |
English PDF |
GB/T 21499-2008 |
Rice - Determinaton of the potential milling yield from paddy aNd from husked rice 大米 稻谷和糙米潜在出米率的测定 |
China National Standards Nd |
English PDF |
GB/T 3410.1-2008 |
Instrument for dam monitoring joint meter - Part 1: UnboNded elastic wire resistance joint meter 大坝监测仪器 测缝计 第1部分:差动电阻式测缝计 |
China National Standards Nd |
English PDF |
GB/T 3408.1-2008 |
Instrument for dam monitoring strain meter - Part 1: UnboNded elastic wire resistance strain meter 大坝监测仪器 应变计 第1部分:差动电阻式应变计 |
China National Standards Nd |
English PDF |
GB/T 21441-2008 |
Olive flouNder 牙鲆 |
China National Standards Nd |
English PDF |
GB/T 17434-2008 |
Specifications for marine fire-resistant wiNdows 船用耐火窗技术条件 |
China National Standards Nd |
English PDF |
GB/T 21453-2008 |
General principles of stipulating the guidelines for cleaner production audit INdustry sectors 工业清洁生产审核指南编制通则 |
China National Standards Nd |
English PDF |
GB/T 8928-2008 |
StaNdard test method for density of semi-solid and solid asphalt 固体和半固体石油沥青密度测定法 |
China National Standards Nd |
English PDF |
GB/T 8927-2008 |
Petroleum aNd liquid petroleum products-Temperature measurement - Manual methods 石油和液体石油产品温度测量 手工法 |
China National Standards Nd |
English PDF |
GB/T 5018-2008 |
StaNdard test method for determining corrosion preventive properties of lubricating greases 润滑脂防腐蚀性试验法 |
China National Standards Nd |
English PDF |
GB/T 21451.4-2008 |
Petroleum aNd liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 4: Measurement of temperature in atmospheric tanks 石油和液体石油产品 储罐中液位和温度自动测量法 第4部分: 常压罐中的温度测量 |
China National Standards Nd |
English PDF |
GB/T 21450-2008 |
Crude petroleum aNd petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3 原油和石油产品 密度在638kg/m3到1074 kg/m3范围内的烃压缩系数 |
China National Standards Nd |
English PDF |
GB/T 1793-2008 |
StaNdard test method for water reaction of aviation fuels 航空燃料水反应试验法 |
China National Standards Nd |
English PDF |
GB/T 11143-2008 |
StaNdard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water 加抑制剂矿物油在水存在下防锈性能试验法 |
China National Standards Nd |
English PDF |
GB/T 21448-2008 |
Specification of cathodic protection for uNderground steel pipelines 埋地钢质管道阴极保护技术规范 |
China National Standards Nd |
English PDF |
GB/T 21446-2008 |
Measurement of natural gas flow by means of staNdard orifice meter 用标准孔板流量计测量天然气流量 |
China National Standards Nd |
English PDF |
GB/T 21445.2-2008 |
Petroleum aNd natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications 石油天然气工业 海底生产系统的设计和操作 第2部分:用于海底和海上的挠性管系统 |
China National Standards Nd |
English PDF |
GB/T 21383-2008 |
Coefficient of initial retroreflected luminance of newly applied pavement marking aNd test method 新划路面标线初始逆反射亮度系数及测试方法 |
China National Standards Nd |
English PDF |
GB/T 21380-2008 |
Nighttime photometric performance aNd test method of retroreflective pedestrian markings 行人反光标识夜间光度性能及测试方法 |
China National Standards Nd |
English PDF |
GB/T 21379-2008 |
Classification aNd coding of the attribute of traffic management information - City road 交通管理信息属性分类与编码 城市道路 |
China National Standards Nd |
English PDF |
GB/T 21394-2008 |
Road traffic information service -Information classifying aNd coding 道路交通信息服务 信息分类与编码 |
China National Standards Nd |
English PDF |
GB/T 21393-2008 |
The methods of statistics aNd analysis for energy consumption of highway transportation 公路运输能源消耗统计及分析方法 |
China National Standards Nd |
English PDF |
GB/T 21392-2008 |
The methods of statistics aNd analysis of energy consumption in shipping transportation 船舶运输能源消耗统计及分析方法 |
China National Standards Nd |
English PDF |
GB/T 6573-2008 |
Cooling water radiator for tractor diesel engines - Method of iNdentifcation symbols 拖拉机柴油机散热器型号编制方法 |
China National Standards Nd |
English PDF |
GB/T 6236-2008 |
Tractors aNd machinery for agricultural and forestry - Seat index point 农林拖拉机和机械 驾驶座标志点 |
China National Standards Nd |
English PDF |
GB/T 6072.1-2008 |
Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel aNd lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 |
China National Standards Nd |
English PDF |
GB/T 5143-2008 |
lNdustrial trucks - Overhead guards - Specification and testing 工业车辆 护顶架 技术要求和试验方法 |
China National Standards Nd |
English PDF |
GB/T 3373-2008 |
Tractors aNd machinery for agriculture and forestry - Rims 农林拖拉机和机械 轮辋 |
China National Standards Nd |
English PDF |
GB/T 2780-2008 |
Drawbars for agricultural tractors - Types dimensionsaNd mounting requirements 农业拖拉机 牵引装置型式尺寸和安装要求 |
China National Standards Nd |
English PDF |
GB/T 21407-2008 |
Doubly fed variable speed constant frequency wiNd turbine 双馈式变速恒频风力发电机组 |
China National Standards Nd |
English PDF |
GB/T 21405-2008 |
Reciprocating intenal combustion engines - Determination aNd method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求 |
China National Standards Nd |
English PDF |
GB/T 21404-2008 |
Internal combustion engine - Determination aNd method for the measurement of engine power - General requirements 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards Nd |
English PDF |
GB/T 21400.2-2008 |
Traveller irrigation machines - Part 2: Softwall hose aNd couplings - Test methods 绞盘式喷灌机 第2部分: 软管和接头 试验方法 |
China National Standards Nd |
English PDF |
GB/T 21400.1-2008 |
Traveller irrigation machines - Part 1: Operational characteristics aNd laboratory and field test methods 绞盘式喷灌机 第1部分:运行特性及实验室和田间试验方法 |
China National Standards Nd |
English PDF |
GB/T 21398-2008 |
Agricultural aNd forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria 农林机械 电磁兼容性 试验方法和验收规则 |
China National Standards Nd |
English PDF |
GB/T 20969.5-2008 |
Special environmental coNdition - Machinery for plateau - Part 5: Guide rule of test for plateau natural environment - Construction machinery 特殊环境条件 高原机械 第5部分:高原自然环境试验导则 工程机械 |
China National Standards Nd |
English PDF |
GB/T 20969.4-2008 |
Special environmental coNdition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines 特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械 |
China National Standards Nd |
English PDF |
GB/T 14786-2008 |
Tractors aNd machinery for agriculture and forestry - Test methods of the driving wheels torsion fatigue 农林拖拉机和机械 驱动车轮扭转疲劳试验方法 |
China National Standards Nd |
English PDF |
GB/T 14785-2008 |
Tractors aNd machiney for agricultural and forestry - Test methods of wheels side load fatigue 农林拖拉机和机械 车轮侧向负载疲劳试验方法 |
China National Standards Nd |
English PDF |
GB/T 6316-2008 |
Vernier, dial aNd digital indicating gear tooth callipers 游标、带表和数显齿厚卡尺 |
China National Standards Nd |
English PDF |
GB/T 6315-2008 |
Vernier, dial aNd digital display universal bevel protractors 游标、带表和数显万能角度尺 |
China National Standards Nd |
English PDF |
GB/T 21390-2008 |
Vernier, dial aNd digital display height callipers 游标、带表和数显高度卡尺 |
China National Standards Nd |
English PDF |
GB/T 21389-2008 |
Vernier, dial aNd digital display calipers 游标、带表和数显卡尺 |
China National Standards Nd |
English PDF |
GB/T 21388-2008 |
Vernier, dial aNd digital display depth callipers 游标、带表和数显深度卡尺 |
China National Standards Nd |
English PDF |
GB/T 12236-2008 |
Steel swing check valve for petroleum, petrochemical aNd allied industries 石油、化工及相关工业用的钢制旋启式止回阀 |
China National Standards Nd |
English PDF |
GB/T 21424-2008 |
Low-speed goods vehicles fuel tank - Safety property requirements aNd test methods 低速货车燃油箱 安全性能要求和试验方法 |
China National Standards Nd |
English PDF |
GB/T 21423-2008 |
Tri-wheel vehicles fuel tank - Safety property requirements aNd test methods 三轮汽车燃油箱 安全性能要求和试验方法 |
China National Standards Nd |
English PDF |
GB/T 21409-2008 |
Glass plant,pipeline aNd fitting - General rules for testing, handling and use 玻璃设备、管道和管件 检验、安装和使用的一般规则 |
China National Standards Nd |
English PDF |
Find out:27370Items | To Page of: First -Previous-Next -Last | [209] [210] [211] [212] [213] [214] [215] |