Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 26281-2021 |
Methods for the calculation of heat balance，heat efficiency and comprehensive energy consumption of cement rotary kiln 水泥回转窑热平衡、热效率、综合能耗计算方法 |
China National Standards al |
 English PDF |
| GB/T 3670-2021 |
Covered electordes for manual metal arc welding of copper and copper alloys 铜及铜合金焊条 |
China National Standards al |
English PDF |
| GB/T 41147-2021 |
Voltage sourced converter(VSC) valves for static synchronous compensator(STATCOM) -- Electrical testing 静止同步补偿装置用电压源换流器阀 电气试验 |
China National Standards al |
English PDF |
| GB/T 41111-2021 |
Rods for gas welding of non-alloy and creep-resisting steels 气焊用非合金钢及热强钢填充丝 |
China National Standards al |
English PDF |
| GB/T 41110-2021 |
Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys 镍及镍合金药芯焊丝 |
China National Standards al |
English PDF |
| GB/T 41112-2021 |
Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys 镁及镁合金焊丝 |
China National Standards al |
English PDF |
| GB/T 26465-2021 |
Safety rules for the construction and installation of firefighters lifts 消防员电梯制造与安装安全规范 |
China National Standards al |
English PDF |
| GB/T 41114-2021 |
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards al |
English PDF |
| GB/T 41123.3-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification 无损检测 工业射线计算机层析成像检测 第3部分：验证 |
China National Standards al |
English PDF |
| GB/T 41123.2-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation 无损检测 工业射线计算机层析成像检测 第2部分：操作和解释 |
China National Standards al |
English PDF |
| GB/T 41123.1-2021 |
Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples 无损检测 工业射线计算机层析成像检测 第1部分：原理、设备和样品 |
China National Standards al |
English PDF |
| GB/T 14088-2021 |
Marine halon fire extinguishing system 船用卤代烷灭火系统 |
China National Standards al |
English PDF |
| GB/T 12604.12-2021 |
Non-destructive testing -- Terminology -- Part 12: Radiation methods for industrial computed tomography 无损检测? 术语? 第12部分：工业射线计算机层析成像检测 |
China National Standards al |
English PDF |
| GB/T 41105.3-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method 无损检测? X射线管电压的测量和评价 第3部分：能谱法 |
China National Standards al |
English PDF |
| GB/T 41105.2-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method 无损检测? X射线管电压的测量和评价 第2部分：厚板滤波法稳定性核查 |
China National Standards al |
English PDF |
| GB/T 41113-2021 |
Qualification testing of brazers and brazing operators 硬钎焊工和硬钎焊操作工技能评定 |
China National Standards al |
English PDF |
| GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分：药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards al |
English PDF |
| GB/T 22437.5-2021 |
Cranes—Design principles for loads and load combinations—Part 5：Overhead travelling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分：桥式和门式起重机 |
China National Standards al |
English PDF |
| GB/T 41105.1-2021 |
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method 无损检测 X射线管电压的测量和评价 第1部分：分压法 |
China National Standards al |
English PDF |
| GB/T 2449.1-2021 |
Sulphur for industrial use—Part 1: Solid product 工业硫磺 第1部分：固体产品 |
China National Standards al |
English PDF |
| GB/T 17889.1-2021 |
Ladders -- Part 1: Terms, types, functional sizes 梯子 第1部分：术语、型式和功能尺寸 |
China National Standards al |
English PDF |
| GB/T 29004-2021 |
Rice transplanter -- Evaluation index and measurement methods for fuel consumption 水稻插秧机 燃油消耗量指标及测量方法 |
China National Standards al |
English PDF |
| GB/T 10395.5-2021 |
Agricultural machinery -- Safety -- Part 5: Power-driven soil-working machines 农业机械 安全 第5部分：驱动式耕作机械 |
China National Standards al |
English PDF |
| GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards al |
English PDF |
| GB/T 8100.2-2021 |
Mounting surfaces of hydraulic valves—Part 2：Compensated flow-control valves 液压阀安装面 第2部分：调速阀 |
China National Standards al |
English PDF |
| GB/T 41176-2021 |
Professional sportswear -- Ski and snowboard wear 专业运动服装? 滑雪服 |
China National Standards al |
English PDF |
| GB/T 24604-2021 |
Rolling bearings－Angular contact thrust ball bearings and units for machine tool screws 滚动轴承 机床丝杠用推力角接触球轴承及单元 |
China National Standards al |
English PDF |
| GB/T 6445-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards al |
English PDF |
| GB/T 304.9-2021 |
Spherical plain bearings—Part 9：General technical regulations 关节轴承 第9部分：通用技术规则 |
China National Standards al |
English PDF |
| GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards al |
English PDF |
| GB/T 26949.12-2021 |
Industrial trucks—Verification of stability—Part 12:Industrial variable-reach trucks handling freight containers of 6 m length and longer 工业车辆 稳定性验证 第12部分：搬运6 m及其以上长度货运集装箱的伸缩臂式叉车 |
China National Standards al |
English PDF |
| GB/T 41124-2021 |
General technical requirements for aseptic blowing-filling-capping bloc 无菌吹灌旋一体机通用技术要求 |
China National Standards al |
English PDF |
| GB/T 41135.1-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 1: General principles and requirements 故障路径指示用电流和电压传感器或探测器?? 第1部分：通用原理和要求 |
China National Standards al |
English PDF |
| GB/T 25629-2021 |
Hydraulic excavator—Central turning joint 液压挖掘机 中央回转接头 |
China National Standards al |
English PDF |
| GB/T 41106.6-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 6: Sort of virtual experience rides 大型游乐设施 检查、维护保养与修理 第6部分：虚拟体验类 |
China National Standards al |
English PDF |
| GB/T 41106.5-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 5: Sort of aquatic rides 大型游乐设施 检查、维护保养与修理 第5部分：水上类 |
China National Standards al |
English PDF |
| GB/T 41106.4-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 4: Sort of lifting rides 大型游乐设施 检查、维护保养与修理 第4部分：升降类 |
China National Standards al |
English PDF |
| GB/T 41106.3-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 3: Sort of rotary rides 大型游乐设施 检查、维护保养与修理 第3部分：旋转类 |
China National Standards al |
English PDF |
| GB/T 41106.2-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 2: Sort of track rides 大型游乐设施 检查、维护保养与修理 第2部分：轨道类 |
China National Standards al |
English PDF |
| GB/T 41106.1-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 1: General 大型游乐设施 检查、维护保养与修理 第1部分：总则 |
China National Standards al |
English PDF |
| GB/T 26301-2021 |
Copper-nickel-zinc alloy strips and foils for shield 屏蔽用锌白铜带箔材 |
China National Standards al |
English PDF |
| GB/T 26024-2021 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards al |
English PDF |
| GB/T 24807-2021 |
Electromagnetic compatibility for lifts, escalators and moving walks—Emission 电梯、自动扶梯和自动人行道的电磁兼容 发射 |
China National Standards al |
English PDF |
| GB/T 18916.11-2021 |
Norm of water intake—Part 11: Coal preparation 取水定额 第11部分：选煤 |
China National Standards al |
English PDF |
| GB/T 26557-2021 |
Builders hoists for persons and materials with vertically guided cages 吊笼有垂直导向的人货两用施工升降机 |
China National Standards al |
English PDF |
| GB/T 22473.1-2021 |
Batteries used for energy storage -- Part 1: Photovoltaic off-grid application technical conditions 储能用蓄电池? 第1部分：光伏离网应用技术条件 |
China National Standards al |
English PDF |
| GB/T 10762-2021 |
Method of mass measurements for industrial and mining electric locomotive 工矿电机车质量测量方法 |
China National Standards al |
English PDF |
| GB/T 16318-2021 |
Basic test method for rotating traction electrical machines 旋转牵引电机基本试验方法 |
China National Standards al |
English PDF |
| GB/T 41174-2021 |
Professional sportswear -- Track and field garment 专业运动服装? 田径服 |
China National Standards al |
English PDF |
| GB/T 26641-2021 |
Non-destructive testing—Magnetic memory testing—General requirements 无损检测 磁记忆检测 总体要求 |
China National Standards al |
English PDF |
| GB/T 41120-2021 |
Non-destructive testing -- Test method for non-ferromagnetic metallic component pulsed eddy current testing 无损检测 非铁磁性金属材料脉冲涡流检测 |
China National Standards al |
English PDF |
| GB/T 41119-2021 |
Non-destructive testing—Micromagnetic testing—General principles 无损检测 微磁检测 总则 |
China National Standards al |
English PDF |
| GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分：耐温差急变性能的测定 |
China National Standards al |
English PDF |
| GB/T 20724-2021 |
Microbeam analysis—Method of thickness measurement for thin crystals by convergent beam electron diffraction 微束分析 薄晶体厚度的会聚束电子衍射测定方法 |
China National Standards al |
English PDF |
| GB/T 41076-2021 |
Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel 微束分析 电子背散射衍射 钢中奥氏体的定量分析 |
China National Standards al |
English PDF |
| GB/T 29732-2021 |
Surface chemical analysis—Medium resolution auger electron spectrometers—Calibration of energy scales for elemental analysis 表面化学分析 中等分辨俄歇电子能谱仪 元素分析用能量标校准 |
China National Standards al |
English PDF |
| GB/T 10827.2-2021 |
Industrial trucks -- Safety requirements and verification -- Part 2: Self-propelled variable-reach trucks 工业车辆? 安全要求和验证? 第2部分：自行式伸缩臂式叉车 |
China National Standards al |
English PDF |
| GB/T 41031-2021 |
Liquefied coalbed methane 液化煤层气 |
China National Standards al |
English PDF |
| GB/T 41089-2021 |
Technical specification for isolated lightning protection of electronic system based on lightning nowcasting and warning 基于雷电临近预警的电子系统隔离防雷技术规范 |
China National Standards al |
English PDF |
| GB/T 41064-2021 |
Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films 表面化学分析 深度剖析 用单层和多层薄膜测定X射线光电子能谱、俄歇电子能谱和二次离子质谱中深度剖析溅射速率的方法 |
China National Standards al |
English PDF |
| GB/T 19490-2021 |
Telecommunication regulations for maritime mobile services—General requirement 水上移动业务通信规则 总体要求 |
China National Standards al |
English PDF |
| GB/T 6476-2021 |
Surface grinding machines with vertical grinding wheel spindle and reciprocating table—Testing of the accuracy 立轴矩台平面磨床 精度检验 |
China National Standards al |
English PDF |
| GB/T 41040-2021 |
COTS semiconductor parts for space application -- Quality assurance requirements 宇航用商业现货（COTS）半导体器件 质量保证要求 |
China National Standards al |
English PDF |
| GB/T 41032-2021 |
General guidelines for construction analysis components for space applications 宇航用元器件结构分析通用指南 |
China National Standards al |
English PDF |
| GB/T 41034-2021 |
General design specification of electromagnetic relay for space application 宇航用电磁继电器通用设计规范 |
China National Standards al |
English PDF |
| GB/T 41036-2021 |
General specification for super high-low temperature circular electrical connector for space applications 宇航用超高低温圆形电连接器通用规范 |
China National Standards al |
English PDF |
| GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 |
China National Standards al |
English PDF |
| GB/T 1927.19-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 |
China National Standards al |
English PDF |
| GB/T 1927.18-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定 |
China National Standards al |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards al |
English PDF |
| GB/T 18916.10-2021 |
Norm of water intake—Part 10：Chemical pharmaceutical products 取水定额 第10部分：化学制药产品 |
China National Standards al |
English PDF |
| GB/T 3799-2021 |
Technical requirements for completion and acceptance of vehicle engines overhaul 汽车发动机大修竣工出厂技术条件 |
China National Standards al |
English PDF |
| GB/T 3798-2021 |
Technical requirements for completion and acceptance of vehicle overhaul 汽车大修竣工出厂技术条件 |
China National Standards al |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards al |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards al |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards al |
English PDF |
| GB/T 1927.8-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定 |
China National Standards al |
English PDF |
| GB/T 41079.1-2021 |
Test methods for physical properties of liquid metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分：密度的测定 |
China National Standards al |
English PDF |
| GB/T 1927.7-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定 |
China National Standards al |
English PDF |
| GB/T 1927.6-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 |
China National Standards al |
English PDF |
| GB/T 1927.5-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分：密度测定 |
China National Standards al |
English PDF |
| GB/T 1927.4-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定 |
China National Standards al |
English PDF |
| GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 |
China National Standards al |
English PDF |
| GB/T 1927.2-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements 无疵小试样木材物理力学性质试验方法 第2部分：取样方法和一般要求 |
China National Standards al |
English PDF |
| GB/T 1927.1-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 1: Collection of sample tree 无疵小试样木材物理力学性质试验方法 第1部分：试材采集 |
China National Standards al |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards al |
English PDF |
| GB/T 29722-2021 |
Commercial coal quality—Coal for entrained-flow gasification 商品煤质量 气流床气化用煤 |
China National Standards al |
English PDF |
| GB/T 23251-2021 |
Guideline for coal used in coal chemical technology 煤化工用煤技术导则 |
China National Standards al |
English PDF |
| GB/T 23810-2021 |
Commercial coal quality—Coal for direct liquefaction 商品煤质量 直接液化用煤 |
China National Standards al |
English PDF |
| GB/T 8643-2021 |
Determination of lubricant content in lubricated metal-powder mixes—Soxhlet extraction method 含润滑剂金属粉末中润滑剂含量的测定 索格利特（Soxhlet）萃取法 |
China National Standards al |
English PDF |
| GB/T 41080-2021 |
Metallographic inspection method for molybdenum and molybdenum alloys 钼及钼合金金相检验方法 |
China National Standards al |
English PDF |
| GB/T 41087-2021 |
Technical specification for heat exchange system of solar thermal power plant 太阳能热发电站换热系统技术要求 |
China National Standards al |
English PDF |
| GB/T 41211-2021 |
General specifications for moon and planetary in-situ spectral detection instrument 月球与行星原位光谱探测仪器通用规范 |
China National Standards al |
English PDF |
| GB/T 41209-2021 |
General specifications for laser rangefinder for lunar and planetary exploration 月球与行星探测激光测距仪通用规范 |
China National Standards al |
English PDF |
| GB/T 41215-2021 |
Space materials science experiment -- Ground-based matching test specification 空间材料科学实验 地面匹配试验规范 |
China National Standards al |
English PDF |
| GB/T 9441-2021 |
Metallographic test method for spheroidal graphite cast iron 球墨铸铁金相检验 |
China National Standards al |
English PDF |
| GB/T 41155-2021 |
Sintered metal materials,excluding hardmetals—Fatigue test pieces 烧结金属材料（不包括硬质合金） 疲劳试样 |
China National Standards al |
English PDF |
| GB/T 41125-2021 |
Agricultural machinery -- Equipment for sowing -- Minimization of the environmental effects of fan exhaust from pneumatic systems 农业机械? 播种机? 减少气力系统风机排气对环境的影响 |
China National Standards al |
English PDF |
| GB/T 41140-2021 |
Analysis criterion for radiation source term of reactor core and spent fuel assembly in PWR nuclear power plant 压水堆核电厂堆芯及乏燃料组件辐射源项分析准则 |
China National Standards al |
English PDF |
| GB/T 5289.2-2021 |
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle—Part 2：Machines with movable column and fixed table 卧式铣镗床精度检验条件 第2部分：带移动立柱和固定工作台的机床 |
China National Standards al |
English PDF |
| Find out:31723Items | To Page of: First -Previous-Next -Last | [37] [38] [39] [40] [41] [42] [43] |
+86-755-25831330
