Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 21962-2008 |
Technical requirements for maize combine HArvester 玉米收获机械 技术条件 |
China National Standards HA |
 English PDF |
| GB/T 21961-2008 |
Test methods for maize combine HArvester 玉米收获机械 试验方法 |
China National Standards HA |
English PDF |
| GB/T 14248-2008 |
Determination of braking performance for HArvesting machinery 收获机械 制动性能测定方法 |
China National Standards HA |
English PDF |
| GB/T 21994.8-2008 |
Chemical analysis of magnesium fluoride - Part 8: Determination of sulpHAte content - Barium sulphate gravimetric method 氟化镁化学分析方法 第8部分：硫酸根含量的测定 硫酸钡重量法 |
China National Standards HA |
English PDF |
| GB/T 20255.6-2008 |
Methods for chemical analysis of HArdmetals - Flame atomic absorption spectrometry - General requirements 硬质合金化学分析方法 火焰原子吸收光谱法 一般要求 |
China National Standards HA |
English PDF |
| GB/T 11880-2008 |
Specification of large die-blocks used for die-forging HAmmer and mechanical forging press 模锻锤和大型机械锻压机用模块技术条件 |
China National Standards HA |
English PDF |
| GB/T 531.1-2008 |
Rubber, vulcanized or thermoplastic - Determination of indentation HArdness - Part 1：Duromerer method （Shore hardness） 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分：邵氏硬度计法（邵尔硬度） |
China National Standards HA |
English PDF |
| GB/T 21993-2008 |
Polyvinyl chloride resins - Determination of the content of metHAnol or ethanol extract 聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定 |
China National Standards HA |
English PDF |
| GB/T 9487-2008 |
Diesel engines - ExHAust gas measurement under free acceleration 柴油机自由加速排气烟度的测量方法 |
China National Standards HA |
English PDF |
| GB/T 4127.11-2008 |
Bonded abrasive products - Dimensions - Part 11：HAnd finishing sticks 固结磨具 尺寸 第11部分：手持抛光磨石 |
China National Standards HA |
English PDF |
| GB/T 2554-2008 |
MecHAnical dividing heads 机械分度头 |
China National Standards HA |
English PDF |
| GB/T 21957-2008 |
The fatigue-life testing method of the axle sHAft and drive shaft on the test stand，wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards HA |
English PDF |
| GB/T 21954.2-2008 |
Metal cutting band saw blades - Part 2：CHAracteristics and dimensions 金属切割带锯条 第2部分：特性和尺寸 |
China National Standards HA |
English PDF |
| GB/T 21950-2008 |
Plunge sHAving cutters 盘形径向剃齿刀 |
China National Standards HA |
English PDF |
| GB/T 21946-2008 |
Numerical control gear sHAving machines - Testing of the accuracy 数控剃齿机 精度检验 |
China National Standards HA |
English PDF |
| GB/T 21945-2008 |
Numerical control sector gear sHAping machines - Testing of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards HA |
English PDF |
| GB/T 21940-2008 |
Earth-moving machinery - Cutting edges used on tractor-dozers, graders and scrapers - Principal sHApes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards HA |
English PDF |
| GB/T 16770.2-2008 |
Solid HArdmetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分：技术条件 |
China National Standards HA |
English PDF |
| GB/T 16770.1-2008 |
Solid HArdmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards HA |
English PDF |
| GB/T 16456.4-2008 |
End mills with brazed helical HArdmetal tips - Part 4：Technical specifications 硬质合金螺旋齿立铣刀 第4部分：技术条件 |
China National Standards HA |
English PDF |
| GB/T 16456.3-2008 |
End mills with brazed helical HArdmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards HA |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper sHAnk 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards HA |
English PDF |
| GB/T 16456.1-2008 |
End mills with brazed helical HArdmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards HA |
English PDF |
| GB/T 15371-2008 |
Torsional vibration of cranksHAft system - Measurement and evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards HA |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical sHAnks with a parallel flat 可转位钻头用削平直柄 |
China National Standards HA |
English PDF |
| GB/T 14333-2008 |
Rotary axial sHAving cutters 盘形轴向剃齿刀 |
China National Standards HA |
English PDF |
| GB/T 14321-2008 |
Testing method for quantities of α-Al2O3 pHAse in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards HA |
English PDF |
| GB/T 10604-2008 |
MecHAnical mining shovel 矿用机械正铲式挖掘机 |
China National Standards HA |
English PDF |
| GB/T 21928-2008 |
Determination of phtHAlate esters in food plastic packaging materials 食品塑料包装材料中邻苯二甲酸酯的测定 |
China National Standards HA |
English PDF |
| GB/T 19460-2008 |
Product of geographical indication - HuangsHAn maofeng tea 地理标志产品 黄山毛峰茶 |
China National Standards HA |
English PDF |
| GB/T 18846-2008 |
Product of geographical indication - ZHAnhua brumal jujube 地理标志产品 沾化冬枣 |
China National Standards HA |
English PDF |
| GB/T 17732-2008 |
Dense，sHAped refractory products - Test methods for products containing carbon 致密定形含碳耐火制品试验方法 |
China National Standards HA |
English PDF |
| GB/T 21985-2008 |
Temperature index of high temperature HArm for main crops 主要农作物高温危害温度指标 |
China National Standards HA |
English PDF |
| GB/T 2900.72-2008 |
Electrotechnical terminology - PolypHAse systems and circuits 电工术语 多相系统与多相电路 |
China National Standards HA |
English PDF |
| GB/T 9984-2008 |
Test methods for industrial sodium tripolyphospHAte 工业三聚磷酸钠试验方法 |
China National Standards HA |
English PDF |
| GB/T 13561.2-2008 |
Safety code on port’s continuous HAndling facilities - Part 2:Pneumatic shipunloader 港口连续装卸设备安全规程 第2部分：气力卸船机 |
China National Standards HA |
English PDF |
| GB 3544-2008 |
DiscHArge standard of water pollutants for pulp and paper industry 制浆造纸工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21909-2008 |
DiscHArge standard of water pollutants for sugar industry 制糖工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21908-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry mixing/compounding and formulation category 混装制剂类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21907-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry bio-pharmaceutical category 生物工程类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21906-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry chinese traditional medicine category 中药类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21905-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry extraction products category 提取类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21904-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry chemical synthesis products category 化学合成类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21903-2008 |
DiscHArge standards of water pollutants for pharmaceutical industry fermentation products category 发酵类制药工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21901-2008 |
DiscHArge standards of water pollutants for down industry 羽绒工业水污染物排放标准 |
China National Standards HA |
English PDF |
| GB 21900-2008 |
DiscHArge standard for pollutants from electroplating 电镀污染物排放标准 |
China National Standards HA |
English PDF |
| GB/Z 21743-2008 |
Stationary proton excHAnge membrane fuel cell power system (separate) - Tests methods for the performance 固定式质子交换膜燃料电池发电系统（独立型）性能试验方法 |
China National Standards HA |
English PDF |
| GB/Z 21742-2008 |
Portable proton excHAnge membrane fuel cell power systems 便携式质子交换膜燃料电池发电系统 |
China National Standards HA |
English PDF |
| GB/T 20042.2-2008 |
Proton excHAnge membrane fuel cell - General technical specification of fuel cell stacks 质子交换膜燃料电池 电池堆通用技术条件 |
China National Standards HA |
English PDF |
| GB/T 17626.7-2008 |
Electromagnetic compatibility - Testing and measurement techniques - General guide on HArmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 电磁兼容 试验和测量技术 供电系统及所连设备谐波、谐间波的测量和测量仪器导则 |
China National Standards HA |
English PDF |
| GB/T 5169.17-2008 |
Fire HAzard testing for electric and electronic products - Part 17: Test flames - 500W flame test methods 电工电子产品着火危险试验 第17部分: 试验火焰 500W 火焰试验方法 |
China National Standards HA |
English PDF |
| GB/T 5169.16-2008 |
Fire HAzard testing for electric and electronic products - Part 16: Test flames - 50W horizontal and vertical flame test methods 电工电子产品着火危险试验 第16部分: 试验火焰 50W 水平与垂直火焰试验方法 |
China National Standards HA |
English PDF |
| GB/T 21911-2008 |
Determination of phtHAlate esters in foods 食品中邻苯二甲酸酯的测定 |
China National Standards HA |
English PDF |
| GB/T 8301-2008 |
Natural rubber latex concentrate - Determination of mecHAnical stability 浓缩天然胶乳 机械稳定度的测定 |
China National Standards HA |
English PDF |
| GB/T 21843-2008 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mecHAnical sieving 塑料 氯乙烯均聚和共聚树脂 用机械筛测定粒径 |
China National Standards HA |
English PDF |
| GB/T 18013-2008 |
Raw natural rubber - Determination of accelerated storage-HArdening number 天然生胶 加速贮存硬化值的测定 |
China National Standards HA |
English PDF |
| GB/T 1291-2008 |
Chemical reagent - Potassium hydrogen phtHAlate 化学试剂 邻苯二甲酸氢钾 |
China National Standards HA |
English PDF |
| GB/T 1233-2008 |
Rubber,unvulcanized - Determinations of pre-vulcanization cHAracteristic using a shearing disc viscometer 未硫化橡胶初期硫化特性的测定 用圆盘剪切粘度计进行测定 |
China National Standards HA |
English PDF |
| GB/T 9268-2008 |
Determination of freeze-tHAw resistance of latex and emulsion paints 乳胶漆耐冻融性的测定 |
China National Standards HA |
English PDF |
| GB/T 21872-2008 |
Sulphonic acid HArdener for foundry no-bake furan resin 铸造自硬呋喃树脂用磺酸固化剂 |
China National Standards HA |
English PDF |
| GB/T 21868.6-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 6: Dispersion using a triple-roll mill 颜料和体质颜料 评定分散性用的分散方法 第6部分:用三辊磨分散 |
China National Standards HA |
English PDF |
| GB/T 21868.5-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 5: Dispersion using an automatic muller 颜料和体质颜料 评定分散性用的分散方法 第5部分:用自动平磨机分散 |
China National Standards HA |
English PDF |
| GB/T 21868.4-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 4:Dispersion using a bead mill 颜料和体质颜料 评定分散性用的分散方法 第4部分:用砂磨分散 |
China National Standards HA |
English PDF |
| GB/T 21868.3-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 3: Dispersion using a high-speed impeller mill 颜料和体质颜料 评定分散性用的分散方法 第3部分:用高速搅拌机分散 |
China National Standards HA |
English PDF |
| GB/T 21868.2-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 2:Dispersion using an oscillatory shaking machine 颜料和体质颜料 评定分散性用的分散方法 第2部分:用振荡磨分散 |
China National Standards HA |
English PDF |
| GB/T 21868.1-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion cHAracteristics - Part 1:Introduction 颜料和体质颜料 评定分散性用的分散方法 第1部分:总则 |
China National Standards HA |
English PDF |
| GB/T 21867.3-2008 |
Pigments and extenders - Methods of assessment of dispersion cHAracteristics - Part 3:Assessment from the change in gloss 颜料和体质颜料 分散性的评定方法 第3部分:由光泽的变化进行评定 |
China National Standards HA |
English PDF |
| GB/T 21867.2-2008 |
Pigments and extenders - Methods of assessment of dispersion cHAracteristics - Part 2:Assessment from the change in fineness of grind 颜料和体质颜料 分散性的评定方法 第2部分:由研磨细度的变化进行评定 |
China National Standards HA |
English PDF |
| GB/T 21867.1-2008 |
Pigments and extenders - Methods of assessment of dispersion cHAracteristics - Part 1:Assessment from the change in tinting strength of coloured pigments 颜料和体质颜料 分散性的评定方法 第1部分:由着色颜料的着色力变化进行评定 |
China National Standards HA |
English PDF |
| GB/T 21283.5-2008 |
Rotary sHAft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈 第5部分 外观缺陷的识别 |
China National Standards HA |
English PDF |
| GB/T 21283.4-2008 |
Rotary sHAft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈 第4部分：性能试验程序 |
China National Standards HA |
English PDF |
| GB/T 21283.3-2008 |
Rotary sHAft lip-type seals incorporating thermoplastic sealing elements - Part 3 :Storage，handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards HA |
English PDF |
| GB/T 13871.3-2008 |
Rotary sHAft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage，handling and installation 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards HA |
English PDF |
| GB/T 13489-2008 |
Rubber coated fabrics - Determination of the burning beHAviour 橡胶涂覆织物燃烧性能测定 |
China National Standards HA |
English PDF |
| GB/T 12722-2008 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test（HAlf-omega test） 橡胶和塑料软管组合件 液压脉冲曲挠试验（半Ω试验） |
China National Standards HA |
English PDF |
| GB/T 6396-2008 |
Clad steel plates - MecHAnical and technological test 复合钢板力学及工艺性能试验方法 |
China National Standards HA |
English PDF |
| GB/T 223.75-2008 |
Iron,steel and alloy - Determination of boron content - MetHAnol distillation-curcumin photometric method 钢铁及合金 硼含量的测定 甲醇蒸馏-姜黄素光度法 |
China National Standards HA |
English PDF |
| GB/T 21838.4-2008 |
Metallic materials - Instrumented indentation test for HArdness and materials parameters - Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压痕试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards HA |
English PDF |
| GB/T 21838.1-2008 |
Metallic materials - Instrumented indentation test for HArdness and materials parameters - Part 1: Test method 金属材料 硬度和材料参数的仪器化压痕试验 第1部分:试验方法 |
China National Standards HA |
English PDF |
| GB/T 17395-2008 |
Dimensions,sHApes,masses,and tolerances of seamless steel tubes 无缝钢管尺寸、外形、重量及允许偏差 |
China National Standards HA |
English PDF |
| GB/T 10623-2008 |
Metallic material - MecHAnical testing - Vocabulary 金属材料 力学性能试验术语 |
China National Standards HA |
English PDF |
| GB/T 21853-2008 |
Testing of chemicals - Partition coefficient（n-octanol/water）- SHAke flask method 化学品 分配系数（正辛醇-水） 摇瓶法试验 |
China National Standards HA |
English PDF |
| GB/T 21815.1-2008 |
Testing of chemicals Biodegradability in seawater - SHAke flask method 化学品 海水中的生物降解性 摇瓶法试验 |
China National Standards HA |
English PDF |
| GB/T 21765-2008 |
Chemicals - Test method of subchronic inHAlation toxicity study 化学品 亚慢性吸入毒性试验方法 |
China National Standards HA |
English PDF |
| GB/T 21754-2008 |
Chemicals - Test method of repeated dose inHAlation toxicity:28/14-day study 化学品 28天/14天重复剂量吸入毒性试验方法 |
China National Standards HA |
English PDF |
| GB/T 21737-2008 |
PurcHAse information on goods and services intended for consumers 为消费者提供商品和服务的购买信息 |
China National Standards HA |
English PDF |
| GB/Z 21738-2008 |
Fundamental structures of one dimensional nanomaterials - High resolution electron microscopy cHAracterization 一维纳米材料的基本结构 高分辨透射电子显微镜检测方法 |
China National Standards HA |
English PDF |
| GB/T 18931-2008 |
Classification of basic dense sHAped refractory products containing less than 7% residual carbon 残碳量小于7%的碱性致密定形耐火制品分类 |
China National Standards HA |
English PDF |
| GB/T 17105-2008 |
Classification of dense sHAped refractory products - Alumina-silica 铝硅系致密定形耐火制品分类 |
China National Standards HA |
English PDF |
| GB/T 19012-2008 |
Quality management - Customer satisfaction - Guidelines for complaints HAndling in organizations 质量管理 顾客满意 组织处理投诉指南 |
China National Standards HA |
English PDF |
| GB/T 5182-2008 |
Fork-lift trucks - Fork arms - Technical cHAracteristics and testing 叉车 货叉 技术要求和试验方法 |
China National Standards HA |
English PDF |
| GB/T 21819-2008 |
Product of designations of origin or geographical indication - SuicHAng bamboo charcoal 地理标志产品 遂昌竹炭 |
China National Standards HA |
English PDF |
| GB/T 21721-2008 |
HAzard administrantion practice on sale locale of agricultural product 农副产品销售现场危害管理规范 |
China National Standards HA |
English PDF |
| GB/T 20944.3-2008 |
Textiles - Evaluation for antibacterial activity - Part 3: SHAke flask method 纺织品 抗菌性能的评价 第3部分：振荡法 |
China National Standards HA |
English PDF |
| GB/T 18661-2008 |
Metal-HAlide lamps (ScI3-NaI series) 金属卤化物灯（钪钠系列） |
China National Standards HA |
English PDF |
| GB/T 15043-2008 |
Method of measuring electrical and photometric cHAracteristics for incandescent lamps 白炽灯泡光电参数的测量方法 |
China National Standards HA |
English PDF |
| GB/T 13434-2008 |
Methods of measuring cHAracteristics for discharge lamps (excluding fluorescent lamps) 放电灯（荧光灯除外）特性测量方法 |
China National Standards HA |
English PDF |
| GB/T 21707-2008 |
Insulation specification for variable frequency adjustable speed definite purpose converter-fed three-pHAse induction motors 变频调速专用三相异步电动机绝缘规范 |
China National Standards HA |
English PDF |
| GB/Z 21713-2008 |
Recommended practice on cHAracteristic of surges in low-voltage (1000 V and Less) AC Power circuits 低压交流电源（不高于1000 V）中的浪涌特性 |
China National Standards HA |
English PDF |
| GB/T 6109.9-2008 |
Enamelled round winding wire - Part 9:Solderable polyuretHAne enamelled round copper wire overcoated with polyamide,class 130 漆包圆绕组线 第9部分：130级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards HA |
English PDF |
| Find out:6719Items | To Page of: First -Previous-Next -Last | [45] [46] [47] [48] [49] [50] [51] |
+86-755-25831330
