GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 20897.2-2007 |
Inflatable boats - Part 2: Boats with a maximum Motor power rating of 4.5 kW to 15 kW inclusive 充气艇 第2部分: 发动机最大额定功率为4.5kW~15kW的艇 |
China National Standards Motor |
English PDF |
GB/T 12782-2007 |
Motor vehicle - Heating performance requirement - Test method 汽车采暖性能要求和试验方法 |
China National Standards Motor |
English PDF |
GB/T 12546-2007 |
Motor vehicle - Ventilation and heat Insulation - Test method 汽车隔热通风试验方法 |
China National Standards Motor |
English PDF |
GB/T 12535-2007 |
Motor vehicle - Starting performance - Test method 汽车起动性能试验方法 |
China National Standards Motor |
English PDF |
GB 14622-2007 |
Limits and measurement methods for the emissions of pollutants from Motorcycles on the running mode(CHINA stage III) 摩托车污染物排放限值及测量方法(工况法,中国第III阶段) |
China National Standards Motor |
English PDF |
GB/T 20897.1-2007 |
Inflatable boats - Part 1: Boats with a maximum Motor power rating of 4.5kW 充气艇 第1部分:发动机最大额定功率为4.5kW的艇 |
China National Standards Motor |
English PDF |
GB 3883.5-2007 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for circular saws 手持式电动工具的安全 第二部分:圆锯的专用要求 |
China National Standards Motor |
English PDF |
GB 3883.3-2007 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for grinders, polishers and disk-type sanders 手持式电动工具的安全 第二部分:砂轮机、抛光机和盘式砂光机的专用要求 |
China National Standards Motor |
English PDF |
GB 3883.15-2007 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for hedge trimmers 手持式电动工具的安全 第二部分:修枝剪的专用要求 |
China National Standards Motor |
English PDF |
GB 3883.14-2007 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for chain saws 手持式电动工具的安全 第二部分:链锯的专用要求 |
China National Standards Motor |
English PDF |
GB 3883.10-2007 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for planers 手持式电动工具的安全 第二部分:电刨的专用要求 |
China National Standards Motor |
English PDF |
GB/T 5375-2006 |
Code of designation for Motorcycles and mopeds 摩托车和轻便摩托车型号编制方法 |
China National Standards Motor |
English PDF |
GB/T 5373-2006 |
Measuring method of dimensions and masses parameter for Motorcycles and mopeds 摩托车和轻便摩托车尺寸和质量参数的测定方法 |
China National Standards Motor |
English PDF |
GB/T 14048.12-2006 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and Motor-starters-AC semiconductor controllers and contactors for non-motor loads 低压开关设备和控制设备 第4-3部分:接触器和电动机起动器-非电动机负载用交流半导体控制器和接触器 |
China National Standards Motor |
English PDF |
GB/T 20638-2006 |
General specification for stepping Motors 步进电动机通用技术条件 |
China National Standards Motor |
English PDF |
GB 15740-2006 |
Protective devices against unauthorized use of Motor vehicles 汽车防盗装置 |
China National Standards Motor |
English PDF |
GB/T 20421.3-2006 |
Hydraulic fluid power―Determination of chracteristics of Motors―Part 3: At constant flow and at constant torque 液压马达特性的测定 第3部分:在恒流量和恒转矩下 |
China National Standards Motor |
English PDF |
GB/T 20421.2-2006 |
Hydraulic fluid power―Determination of chracteristics of Motors―Part 2: Startability 液压马达特性的测定 第2部分:起动性 |
China National Standards Motor |
English PDF |
GB/T 20421.1-2006 |
Hydraulic fluid power―Determination of characteristics of Motors―Part 1: At constant low speed and at constant pressure 液压马达特性的测定 第1部分:在恒低速和恒压力下 |
China National Standards Motor |
English PDF |
GB/T 12497-2006 |
Three-phase induction Motor“s economic operation 三相异步电动机经济运行 |
China National Standards Motor |
English PDF |
GB 20294-2006 |
Safety requirements of flameproof crane & metallurgical and canned Motors 隔爆型起重冶金和屏蔽电机安全要求 |
China National Standards Motor |
English PDF |
GB 20237-2006 |
Safety requirements of crane & metallurgical Motors and canned motors 起重冶金和屏蔽电机安全要求 |
China National Standards Motor |
English PDF |
GB 20414-2006 |
Rubber hoses and hose assemblies for liquefied petroleum gas in Motor vehicles―Specification 机动车用液化石油气的橡胶软管和软管组合件 |
China National Standards Motor |
English PDF |
GB 12995-2006 |
Combustion-Motor-driven wheelchairs 机动轮椅车 |
China National Standards Motor |
English PDF |
GB/T 20137-2006 |
Method for determining losses and efficiency of three-phase cage induction Motors 三相笼型异步电动机损耗和效率的确定方法 |
China National Standards Motor |
English PDF |
GB/T 3787-2006 |
Technical safety code for management, operation, inspection and maintenance of hand-held Motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards Motor |
English PDF |
GB/T 20076-2006 |
Measurement methods of maximum torque and maximum net power of engines for Motorcycles and mopeds 摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法 |
China National Standards Motor |
English PDF |
GB 20075-2006 |
Passenger hand-holds on Motorcycles 摩托车乘员扶手 |
China National Standards Motor |
English PDF |
GB 20074-2006 |
External projections from Motorcycles and mopeds 摩托车和轻便摩托车外部凸出物 |
China National Standards Motor |
English PDF |
GB 20073-2006 |
Performance and measurement method for braking of Motorcycles and mopeds 摩托车和轻便摩托车 制动性能要求及试验方法 |
China National Standards Motor |
English PDF |
GB 16487.8-2005 |
Environmental protection control standard for imported solid wastes as raw materials -- Waste electric Motors 进口可用作原料的固体废物环境保护控制标准 废电机 |
China National Standards Motor |
English PDF |
GB/T 2353-2005 |
Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and Motors 液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号 |
China National Standards Motor |
English PDF |
GB/T 3487-2005 |
Rim contour for Motor vehicles 汽车轮辋规格系列 |
China National Standards Motor |
English PDF |
GB/T 19910-2005 |
Technical requirements for electronic control system of Motor-vehicles engine being overhauled 汽车发动机电子控制系统修理技术要求 |
China National Standards Motor |
English PDF |
GB 3883.17-2005 |
Safety of hand-held Motor-operated electric tools Part 2:Particular requirements for routers and trimmers 手持式电动工具的安全 第2部分:木铣和修边机的专用要求 |
China National Standards Motor |
English PDF |
GB/T 5624-2005 |
Motor vehicle maintenance and repair terms 汽车维修术语 |
China National Standards Motor |
English PDF |
GB 19758-2005 |
Limits and measurement methods for exhaust smoke emissions from Motorcycles and mopeds 摩托车和轻便摩托车排气烟度排放限值及测量方法 |
China National Standards Motor |
English PDF |
GB/T 3667.1-2005 |
AC Motor capacitors-Part 1:General-Performance,testing and rating-Safety requirements-Guide for installation and operation 交流电动机电容器 第1部分:总则--性能、试验和定额--安全要求--安装和运行导则 |
China National Standards Motor |
English PDF |
GB 4569-2005 |
Limit and measurement method of noise emitted by stationary Motorcycles and Mopeds 摩托车和轻便摩托车 定置噪声限值及测量方法 |
China National Standards Motor |
English PDF |
GB 16169-2005 |
Limit and measurement method of noise emitted by accelerating Motorcycles and Mopeds 摩托车和轻便摩托车 加速行驶噪声限值及测量方法 |
China National Standards Motor |
English PDF |
GB 13960.13-2005 |
Safety of transportable Motor-operated electric tool-Part2:Particular requirements for combined mitre-bench saws 可移式电动工具的安全 第二部分:斜切割台式组合锯的专用要求 |
China National Standards Motor |
English PDF |
GB 19482-2004 |
Safety property requirements and test method for fuel tanks of Motorcycles and mopeds 摩托车和轻便摩托车燃油箱安全性能要求和试验方法 |
China National Standards Motor |
English PDF |
GB 5135.2-2003 |
Automatic sprinkler system--Part 2:Wet system alarm valves,retard chamber,water Motor alarm 自动喷水灭火系统 第2部分: 湿式报警阀、延迟器、水力警铃 |
China National Standards Motor |
English PDF |
GB/T 13594-2003 |
Antilock braking performance and test procedure for Motor vehicles and their trailers 机动车和挂车防抱制动性能和试验方法 |
China National Standards Motor |
English PDF |
GB 19151-2003 |
Warning triangles for Motor vehicle 机动车用三角警告牌 |
China National Standards Motor |
English PDF |
GB/T 19055-2003 |
Reliability test methods for Motor vehicle engines 汽车发动机可靠性试验方法 |
China National Standards Motor |
English PDF |
GB/T 18954-2003 |
Chassis dynamometer setting for Motorcycles and mopeds--Coastdown method 摩托车和轻便摩托车底盘测功机的设定 惯性滑行法 |
China National Standards Motor |
English PDF |
GB/T 18860-2002 |
The variable speed drive V-belts for Motor-cycle 摩托车变速V带 |
China National Standards Motor |
English PDF |
GB/T 18697-2002 |
Acoustics--Measurement of noise inside Motor vehicles 声学 汽车车内噪声测量方法 |
China National Standards Motor |
English PDF |
GB 1495-2002 |
Limits and measurement methods for noise emitted by accelerating Motor vehicles 汽车加速行驶车外噪声限值及测量方法 |
China National Standards Motor |
English PDF |
GB/T 18572-2001 |
Small craft--Static thrust measurement for outboard Motors 小艇 舷外机的静推力测定 |
China National Standards Motor |
English PDF |
GB/T 18571-2001 |
Small craft--Portable fuel systems for outboard Motors 小艇 舷外机便携式燃油系统 |
China National Standards Motor |
English PDF |
GB/T 14808-2001 |
High-voltage alternating current contactors and contactor-based Motor-starters 交流高压接触器和基于接触器的电动机起动器 |
China National Standards Motor |
English PDF |
GB 18408-2001 |
Photometric characteristics of devices for the illumination of rear registration plates of Motor vehicles and theirtrailers 汽车及挂车后牌照板照明装置配光性能 |
China National Standards Motor |
English PDF |
GB 11567.2-2001 |
Motor vehicles and trailers--Rear underrun protection requirements 汽车和挂车后下部防护要求 |
China National Standards Motor |
English PDF |
GB 11567.1-2001 |
Motor vehicles and trailers--Lateral protectionrequirements 汽车和挂车侧面防护要求 |
China National Standards Motor |
English PDF |
GB/T 3730.1-2001 |
Motor vehicles and trailers--Types--Terms and definitions 汽车和挂车类型的术语和定义 |
China National Standards Motor |
English PDF |
GB/T 11798.9-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 9:Technical requirements of verification for platform brake tester 机动车安全检测设备 检定技术条件 第9部分:平板制动试验台检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.8-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 8:Technical requirements of verification of motorcycle wheel deviation tester 机动车安全检测设备 检定技术条件 第8部分:摩托车轮偏检测仪检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.7-2001 |
Motorvehicle safety testing equipment--Technical requirements of verification--Part 7:Technical requirements of verification for Axle(Wheel) load scales 机动车安全检测设备 检定技术条件 第7部分:轴(轮)重仪检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.6-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 6:Technical requirements of verification for symmetrical beam headlamp tester 机动车安全检测设备 检定技术条件 第6部分:对称光前照灯检测仪检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.5-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 5:Technical requirements of verification for filter type smokemeter 机动车安全检测设备 检定技术条件 第5部分:滤纸式烟度计检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.4-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 4:Technical requirements of verification for speedometer tester of roller type 机动车安全检测设备 检定技术条件 第4部分:滚筒式车速表试验台检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.3-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 3:Technical requirements of verification for gasoline motor vehicle emission analyzer 机动车安全检测设备 检定技术条件 第3部分:汽油车排气分析仪检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.2-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 2:Technical requirements of verification for opposite force roller brake tester 机动车安全检测设备 检定技术条件 第2部分:滚筒反力式制动试验台检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 11798.1-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 1:Technical requirements of verification for side slip tester of slipper type 机动车安全检测设备 检定技术条件 第1部分:滑板式汽车侧滑试验台检定技术条件 |
China National Standards Motor |
English PDF |
GB/T 18344-2001 |
Specification for the inspection and maintenance of Motor vehicle 汽车维护、检测、诊断技术规范 |
China National Standards Motor |
English PDF |
GB 15742-2001 |
Performance requirements and test methods of horn for Motor vehicles 机动车用喇叭的性能要求及试验方法 |
China National Standards Motor |
English PDF |
GB/T 18276-2000 |
Test-bed methods and evaluating index of dynamic property for Motor vehicles 汽车动力性台架试验方法和评价指标 |
China National Standards Motor |
English PDF |
GB/T 18274-2000 |
Technical specifications for Motor vehicle drum brake being overhauled 汽车鼓式制动器修理技术条件 |
China National Standards Motor |
English PDF |
GB 13960.11-2000 |
Safety of transportable Motor-operated electric tools--Part 2:Particular requirements for cutting-off grinders 可移式电动工具的安全 第二部分:型材切割机的专用要求 |
China National Standards Motor |
English PDF |
GB/T 4780-2000 |
Terms for Motor vehicle body 汽车车身术语 |
China National Standards Motor |
English PDF |
GB 4094-1999 |
Motor vehicles--Symbols for controls,indicators and tell-tales 汽车操纵件、指示器及信号装置的标志 |
China National Standards Motor |
English PDF |
GB/T 4772.3-1999 |
Dimensions and output series for rotating electrical machines--Part 3:Samll built-in Motors--Flange numbers BF10 to BF50 旋转电机尺寸和输出功率等级 第3部分:小功率装入式电动机 凸缘号BF10~BF50 |
China National Standards Motor |
English PDF |
GB 17675-1999 |
Steering system of Motor vehicles--Basic requirements 汽车转向系 基本要求 |
China National Standards Motor |
English PDF |
GB/T 17485-1998 |
Hydraulic fluid power--Pumps,Motors and integral transmissions--Parameter definitions and letter symbols 液压泵、马达和整体传动装置参数定义和字母符号 |
China National Standards Motor |
English PDF |
GB/T 17349.1-1998 |
Road vehicles--Diagnostic systems for Motor vehicles--Vocabulary 道路车辆 汽车诊断系统 词汇 |
China National Standards Motor |
English PDF |
GB 13960.9-1997 |
Safety of transportable Motor-operated electric tools--Part 2:Particular requirements for mitresaws 可移式电动工具的安全 第二部分:斜切割机的专用要求 |
China National Standards Motor |
English PDF |
GB 13960.8-1997 |
Safety of transportable Motor-operated electric tools--Part 2:Particular requirements for diamond saws with water supply 可移式电动工具的安全 第二部分:带水源金刚石锯的专用要求 |
China National Standards Motor |
English PDF |
GB 13960.7-1997 |
Safety of transportable Motor-operated electric tools--Part 2:Particular requirements for diamond drills with water supply 可移式电动工具的安全 第二部分:带水源金刚石钻的专用要求 |
China National Standards Motor |
English PDF |
GB/T 16570-1996 |
Motor vehicles--Cradle-mounted in-line fuel injection pumps for diesel engines--Mounting dimensions 汽车柴油机架装直列式喷油泵 安装尺寸 |
China National Standards Motor |
English PDF |
GB 13960.6-1996 |
Safety of transportable Motor-operated electric tools--Particular requirements for band saws 可移式电动工具的安全 带锯的专用要求 |
China National Standards Motor |
English PDF |
GB 13960.3-1996 |
Safety of transportable Motor-operated electric tools--Particular requirements for radial arm saws 可移式电动工具的安全 摇臂锯的专用要求 |
China National Standards Motor |
English PDF |
GB/T 5487-1995 |
Test method for knock characteristics of Motor fuels by the Research method 汽油辛烷值测定法(研究法) |
China National Standards Motor |
English PDF |
GB/T 503-1995 |
Test method for knock characteristics of Motor and aviation fuels by the motor method 汽油辛烷值测定法(马达法) |
China National Standards Motor |
English PDF |
GB 15741-1995 |
The license plates (crackets) and its position on Motor vehicles and trailer 汽车和挂车号牌板(架)及其位置 |
China National Standards Motor |
English PDF |
GB/T 14171-1993 |
Motor vehicles--Pneumatic brakingsystems--Tapped holes and male fittings 汽车气制动系管路螺纹孔和管接头外螺纹 |
China National Standards Motor |
English PDF |
GB 3883.13-1992 |
Safety of hand-held Motor operated electric tools--Part 2:Particular requirements for sprayguns for non-flammable liquids 手持式电动工具的安全 第二部分:不易燃液体电喷枪的专用要求 |
China National Standards Motor |
English PDF |
GB/T 13881-1992 |
Pneumatic braking connections between Motor vehicles and towed vehicles 牵引车与挂车之间气制动管连接器 |
China National Standards Motor |
English PDF |
GB/T 3730.3-1992 |
Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions 汽车和挂车的术语及其定义 车辆尺寸 |
China National Standards Motor |
English PDF |
GB/T 12679-1990 |
Motor vehicles--Durability running--Test method 汽车耐久性行驶试验方法 |
China National Standards Motor |
English PDF |
GB/T 12677-1990 |
Motor vehicles--Technical condition--Inspection method 汽车技术状况行驶检查方法 |
China National Standards Motor |
English PDF |
GB/T 12674-1990 |
Motor vehicles--Weight parameter--Measuringmethod 汽车质量(重量)参数测定方法 |
China National Standards Motor |
English PDF |
GB/T 12548-1990 |
Motor vehicles--Speedometer and odometer--Calibration method 汽车速度表、里程表检验校正方法 |
China National Standards Motor |
English PDF |
GB/T 12541-1990 |
Motor vehicles--Passing topography capacity--Test method 汽车地形通过性试验方法 |
China National Standards Motor |
English PDF |
GB/T 12539-1990 |
Motor vehicles--Steep hill climbing--Test method 汽车爬陡坡试验方法 |
China National Standards Motor |
English PDF |
GB/T 12537-1990 |
Motor vehicles--Towing performance--Test method 汽车牵引性能试验方法 |
China National Standards Motor |
English PDF |
GB/T 12536-1990 |
Motor vehicles--Coastdown--Test method 汽车滑行试验方法 |
China National Standards Motor |
English PDF |
GB/T 12534-1990 |
Motor vehicles--General rules of road test method 汽车道路试验方法通则 |
China National Standards Motor |
English PDF |
GB/T 918.2-1989 |
Classification and code for road vehicles--Non-Motor vehicle 道路车辆分类与代码 非机动车 |
China National Standards Motor |
English PDF |
Find out:602Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |