Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 28893-2012 |
Surface Chemical Analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information REquired when reporting results 表面化学分析 俄歇电子能谱和X射线光电子能谱 测定峰强度的方法和报告结果所需的信息 |
China National Standards RE |
 English PDF |
| GB/T 28891-2012 |
FibRE-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 |
China National Standards RE |
English PDF |
| GB/T 28888-2012 |
Technical REquirements of gas monitoring for sewer and septic tanks 下水道及化粪池气体监测技术要求 |
China National Standards RE |
English PDF |
| GB/T 28846-2012 |
REd scarf 红领巾 |
China National Standards RE |
English PDF |
| GB/T 28743-2012 |
Sewage tREatment vessel equipment - General technical requirements 污水处理容器设备 通用技术条件 |
China National Standards RE |
English PDF |
| GB/T 28742-2012 |
Sewage tREatment equipment for prevention and treatment of water pollution 污水处理设备安全技术规范 |
China National Standards RE |
English PDF |
| GB/T 28740-2012 |
Equipment of compost tREatment and utilization for manure of poultry and livestock 畜禽养殖粪便堆肥处理与利用设备 |
China National Standards RE |
English PDF |
| GB/T 28739-2012 |
Kitchen waste tREating and utilizing equipments in catering services 餐饮业餐厨废弃物处理与利用设备 |
China National Standards RE |
English PDF |
| GB/T 28737-2012 |
Controller for solar water heating system (tank volume moRE than 0.6 m3) 太阳能热水系统(储水箱容积大于0.6 m3)控制装置 |
China National Standards RE |
English PDF |
| GB/T 28733-2012 |
Determination of total moistuRE for solid biofuels 固体生物质燃料全水分测定方法 |
China National Standards RE |
English PDF |
| GB/T 28730-2012 |
Method for pREparation of solid biofuels sample 固体生物质燃料样品制备方法 |
China National Standards RE |
English PDF |
| GB/T 19229.3-2012 |
Coal-fiREd flue gas desulphurization equipment - Part 3：The equipment for coal-fired flue gas desulphurization by seawater 燃煤烟气脱硫设备 第3部分：燃煤烟气海水脱硫设备 |
China National Standards RE |
English PDF |
| GB/T 17780.7-2012 |
Textile machinery - Safety REquirements - Part 7: Dyeing and finishing machinery 纺织机械 安全要求 第7部分：染整机械 |
China National Standards RE |
English PDF |
| GB/T 17780.5-2012 |
Textile machinery - Safety REquirements - Part 5: Preparatory machinery to weaving and knitting 纺织机械 安全要求 第5部分：机织和针织准备机械 |
China National Standards RE |
English PDF |
| GB/T 17780.4-2012 |
Textile machinery - Safety REquirements - Part 4: Yarn processing,cordage and rope manufacturing machinery 纺织机械 安全要求 第4部分：纱线和绳索加工机械 |
China National Standards RE |
English PDF |
| GB/T 17780.3-2012 |
Textile machinery - Safety REquirements - Part 3: Nonwoven machinery 纺织机械 安全要求 第3部分：非织造布机械 |
China National Standards RE |
English PDF |
| GB/T 17780.2-2012 |
Textile machinery - Safety REquirements - Part 2: Spinning preparatory and spinning machines 纺织机械 安全要求 第2部分：纺纱准备和纺纱机械 |
China National Standards RE |
English PDF |
| GB/T 17780.1-2012 |
Textile machinery - Safety REquirements - Part 1: Common requirements 纺织机械 安全要求 第1部分：通用要求 |
China National Standards RE |
English PDF |
| GB 8176-2012 |
Safety production codes for pREsswork 冲压车间安全生产通则 |
China National Standards RE |
English PDF |
| GB 28735-2012 |
Door opener for fiRE fighting 消防用开门器 |
China National Standards RE |
English PDF |
| GB 21976.7-2012 |
Escape apparatus for building fiRE - Part 7: Filtering respiratory protective devices for self-rescue from fire 建筑火灾逃生避难器材 第7部分：过滤式消防自救呼吸器 |
China National Standards RE |
English PDF |
| GB 21976.6-2012 |
Escape apparatus for building fiRE - Part 6: Escape rope 建筑火灾逃生避难器材 第6部分：逃生绳 |
China National Standards RE |
English PDF |
| GB 21976.3-2012 |
Escape apparatus for building fiRE - Part 3: Escape ladder 建筑火灾逃生避难器材 第3部分：逃生梯 |
China National Standards RE |
English PDF |
| GB 21976.2-2012 |
Escape apparatus for building fiRE - Part 2: Automatic and repetitive rescue controlled descent device 建筑火灾逃生避难器材 第2部分：逃生缓降器 |
China National Standards RE |
English PDF |
| GB 15735-2012 |
REquirements for the safety and health in production process of metal heat treatment 金属热处理生产过程安全、卫生要求 |
China National Standards RE |
English PDF |
| GB/Z 28805-2012 |
Intelligrid methodology for developing REquirements for energy systems 能源系统需求开发的智能电网方法 |
China National Standards RE |
English PDF |
| GB/T 5953.3-2012 |
Steel wiRE for cold heading - part 3: Non-quenched and tempered steel wire for cold heading 冷镦钢丝 第3部分：非调质型冷镦钢丝 |
China National Standards RE |
English PDF |
| GB/T 28909-2012 |
Extra-high stREngth structural steel plates in the heat-treatment condition 超高强度结构用热处理钢板 |
China National Standards RE |
English PDF |
| GB/T 28907-2012 |
Sulfuric acid dew-point corrosion REsistance steel plates and strips 耐硫酸露点腐蚀钢板和钢带 |
China National Standards RE |
English PDF |
| GB/T 28906-2012 |
Hot rolled wiRE rod for cold heading 冷镦钢热轧盘条 |
China National Standards RE |
English PDF |
| GB/T 28905-2012 |
Low yield stREngth steel plates for construction 建筑用低屈服强度钢板 |
China National Standards RE |
English PDF |
| GB/T 28903-2012 |
Stainless steel wiRE for spoike 辐条用不锈钢丝 |
China National Standards RE |
English PDF |
| GB/T 28902-2012 |
Electvolytic polishing for stainless steel wiREs 电解抛光用不锈钢丝 |
China National Standards RE |
English PDF |
| GB/T 28900-2012 |
Test methods of steel for REinforcement of concrete 钢筋混凝土用钢材试验方法 |
China National Standards RE |
English PDF |
| GB/T 28899-2012 |
WiRE rods for cold rolled ribbed steel bars 冷轧带肋钢筋用热轧盘条 |
China National Standards RE |
English PDF |
| GB/T 28896-2012 |
Metallic Materials - Method of test for the determination of quasistatic fractuRE toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards RE |
English PDF |
| GB/T 28895-2012 |
Protective clothing - Performance REquirements of oil repellency, sorl release, antistatic clothing 防护服装 抗油易去污防静电防护服 |
China National Standards RE |
English PDF |
| GB/T 28882-2012 |
RaRE earth carbonate of ion-absorpted type rare earth ore 离子型稀土矿碳酸稀土 |
China National Standards RE |
English PDF |
| GB/T 2608-2012 |
Silica REfractory bricks 硅砖 |
China National Standards RE |
English PDF |
| GB/T 20167-2012 |
Physical test method of raRE earth polishing powder - Determination of burnishing mass and scratch - Gravimetry 稀土抛光粉物理性能测试方法 抛蚀量和划痕的测定 重量法 |
China National Standards RE |
English PDF |
| GB/T 20166.2-2012 |
Chemical analysis methods of raRE earth polishing powder - Part 2: Determination fluorine content - Ion selective electrode analysis 稀土抛光粉化学分析方法 第2部分：氟量的测定 离子选择性电极法 |
China National Standards RE |
English PDF |
| GB/T 20166.1-2012 |
Chemical analysis methods of raRE earth polishing powder - Part 1: Determination of cerium oxide content - Titrimetry 稀土抛光粉化学分析方法 第1部分：氧化铈量的测定 滴定法 |
China National Standards RE |
English PDF |
| GB/T 20165-2012 |
RaRE earth polishing powder 稀土抛光粉 |
China National Standards RE |
English PDF |
| GB/T 18301-2012 |
REfractory products - Determination of resistance to abrasion at ambient temperature 耐火材料 常温耐磨性试验方法 |
China National Standards RE |
English PDF |
| GB/T 16763-2012 |
Shaped insulating REfractory products - Classification 定形隔热耐火制品分类 |
China National Standards RE |
English PDF |
| GB/T 16716.7-2012 |
Packaging and packaging waste - Part 7：REcoverable by composting and biodegradation 包装与包装废弃物 第7部分: 生物降解和堆肥 |
China National Standards RE |
English PDF |
| GB/T 16716.6-2012 |
Packaging and packaging waste - Part 6：REcoverable by energy recovery 包装与包装废弃物 第6部分：能量回收利用 |
China National Standards RE |
English PDF |
| GB/T 14999.3-2012 |
Test methods for superalloys - Part 3: Verification of longitudinal fractuRE of bars 高温合金试验方法 第3部分：棒材纵向断口检验 |
China National Standards RE |
English PDF |
| GB/T 14999.2-2012 |
Test methods for superalloys - Part 2: Verification of transverse macro-structuREs and defect by etch 高温合金试验方法 第2部分：横向低倍组织及缺陷酸浸检验 |
China National Standards RE |
English PDF |
| GB/T 14999.1-2012 |
Test method for superalloys - Part 1: Verification of longitudinal macro-structuREs and defect by etch 高温合金试验方法 第1部分：纵向低倍组织及缺陷酸浸检验 |
China National Standards RE |
English PDF |
| GB/T 14975-2012 |
Seamless stainless steel tubes for structuRE 结构用不锈钢无缝钢管 |
China National Standards RE |
English PDF |
| GB/T 12770-2012 |
Welded stainless steel tubes for mechanical structuREs 机械结构用不锈钢焊接钢管 |
China National Standards RE |
English PDF |
| GB/T 1234-2012 |
High REsistance alloys for electrical heating 高电阻电热合金 |
China National Standards RE |
English PDF |
| GB/T 10325-2012 |
Shaped REfractory products-rule of acceptance,sampling and inspection 定形耐火制品验收抽样检验规则 |
China National Standards RE |
English PDF |
| GB 4706.64-2012 |
Safety of household and similar electrical appliances - Part 2: Particular REquirements for scissor type grass shears 家用和类似用途电器的安全 第2部分：剪刀型草剪的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.9-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for tappers 手持式电动工具的安全 第2部分：攻丝机的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.8-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分：电剪刀和电冲剪的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.7-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for hammers 手持式电动工具的安全 第2部分：锤类工具的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.6-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for drills and impact drills 手持式电动工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.4-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分：非盘式砂光机和抛光机的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.2-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分：螺丝刀和冲击扳手的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.21-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for band saws 手持式电动工具的安全 第2部分：带锯的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.20-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for strapping tools 手持式电动工具的安全 第2部分：捆扎机的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.19-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for drain cleaners 手持式电动工具的安全 第2部分：管道疏通机的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.12-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for concrete vibrators 手持式电动工具的安全 第2部分：混凝土振动器的专用要求 |
China National Standards RE |
English PDF |
| GB 3883.11-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular REquirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分：往复锯(曲线锯、刀锯)的专用要求 |
China National Standards RE |
English PDF |
| GB 28883-2012 |
Composite seamless steel tubes for pREssure 承压用复合无缝钢管 |
China National Standards RE |
English PDF |
| GB 19215.3-2012 |
Cable trunking and ducting systems for electrical installations - Part 2-2: Particular REquirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations 电气安装用电缆槽管系统 第2部分：特殊要求 第2节：安装在地板下和与地板齐平的电缆槽管系统 |
China National Standards RE |
English PDF |
| GB 18082.1-2012 |
Health protection zone for leather and fur and manufactuREd products industry - Part 1：Leather tanning industry 皮革、毛皮及其制品业卫生防护距离 第1部分：皮革鞣制加工业 |
China National Standards RE |
English PDF |
| GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety REquirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2（包括）导线的夹紧件的通用要求和特殊要求 |
China National Standards RE |
English PDF |
| GB 11887-2012 |
Jewellery - Fineness of pREcious metal alloys and designation 首饰 贵金属纯度的规定及命名方法 |
China National Standards RE |
English PDF |
| GB/T 28794-2012 |
Technical REquirements of oily-water separation system fishing vessel 渔业船舶油污水分离系统技术要求 |
China National Standards RE |
English PDF |
| GB/T 28793-2012 |
Technical REquirements of fuel saving for fishing vessel diesel engines 渔业船舶柴油机节油技术要求 |
China National Standards RE |
English PDF |
| GB/T 28790-2012 |
Technical REquirements and measuring methods of fuel saving devices for diesel engines of fishing vessel 渔业船舶柴油机节油装置技术条件及检测方法 |
China National Standards RE |
English PDF |
| GB/T 983-2012 |
CoveREd electrodes for manual metal arc welding of stainless and heat-resisting steels 不锈钢焊条 |
China National Standards RE |
English PDF |
| GB/T 8017-2012 |
Standard test method for vapor pREssure of petroleum products (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards RE |
English PDF |
| GB/T 7631.13-2012 |
Lubricants，industrial oils and RElated products(class L) - Classification - Part 13: Family A(Total loss systems) 润滑剂、工业用油和有关产品（L类）的分类 第13部分：A组（全损耗系统） |
China National Standards RE |
English PDF |
| GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measuREments on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分：50MW以上，额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards RE |
English PDF |
| GB/T 6075.1-2012 |
Mechanical vibration - Evaluation of machine vibration by measuREments on non-rotating parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分：总则 |
China National Standards RE |
English PDF |
| GB/T 5118-2012 |
CoveREd electrodes for manual metal arc welding of creep-resisting steels 热强钢焊条 |
China National Standards RE |
English PDF |
| GB/T 5117-2012 |
CoveREd electrodes for manual metal arc welding of non-alloy and fine grain steels 非合金钢及细晶粒钢焊条 |
China National Standards RE |
English PDF |
| GB/T 4214.7-2012 |
Household and similar electrical appliances - Test code for determination of airborne acoustical noise - Particular REquirements for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards RE |
English PDF |
| GB/T 28912-2012 |
Test method for two phase RElative permeability in rock 岩石中两相流体相对渗透率测定方法 |
China National Standards RE |
English PDF |
| GB/T 28910-2012 |
The measuREment method of crude oil rheological properties 原油流变性测定方法 |
China National Standards RE |
English PDF |
| GB/T 28804-2012 |
Copper-fREe silver mirror on flat glass 无铜镀银玻璃镜 |
China National Standards RE |
English PDF |
| GB/T 28803-2012 |
DiREctives for risk management of consumer products safety 消费品安全风险管理导则 |
China National Standards RE |
English PDF |
| GB/T 28802-2012 |
General technical REquirements for jade carving 玉器雕琢通用技术要求 |
China National Standards RE |
English PDF |
| GB/T 28799.3-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperatuRE resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯（PE-RT）管道系统 第3部分：管件 |
China National Standards RE |
English PDF |
| GB/T 28799.2-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperatuRE resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 |
China National Standards RE |
English PDF |
| GB/T 28799.1-2012 |
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperatuRE resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards RE |
English PDF |
| GB/T 28786-2012 |
Vacuum technology - Methods of bonding stREngth measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards RE |
English PDF |
| GB/T 28784.3-2012 |
Mechanical vibration - MeasuREment of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment 机械振动 船舶振动测量 第3部分：船上设备安装前的振动测量 |
China National Standards RE |
English PDF |
| GB/T 28783-2012 |
Pneumatic fluid power - Standard REference atmosphere 气动 标准参考大气 |
China National Standards RE |
English PDF |
| GB/T 28782.2-2012 |
Hydraulic fluid power - MeasuREment techniques - Part 2: Measurement of average steady-state pressure in a closed conduit 液压传动测量技术 第2部分：密闭回路中平均稳态压力的测量 |
China National Standards RE |
English PDF |
| GB/T 28781-2012 |
Pneumatic fluid power Compact cylinders, boREs form 20mm to 100mm - Basic dimensions and mounting dimensions 气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸 |
China National Standards RE |
English PDF |
| GB/T 28777-2012 |
Process valve qualification proceduRE for the petrochemical industry 石化工业用阀门的评定 |
China National Standards RE |
English PDF |
| GB/T 28769-2012 |
Test method for determination of fREe glycerol content in Fatty Acid Methyl Esters(FAME) by gas chromatography 脂肪酸甲酯中游离甘油含量的测定 气相色谱法 |
China National Standards RE |
English PDF |
| GB/T 27894.5-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using thREe columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分：实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards RE |
English PDF |
| GB/T 19876-2012 |
Safety of machinery ― Positioning of safeguards with REspect to the approach speeds of parts of the human body 机械安全 与人体部位接近速度相关的安全防护装置的定位 |
China National Standards RE |
English PDF |
| GB/T 19869.2-2012 |
Welding proceduRE qualification test for aluminum and its alloys 铝及铝合金的焊接工艺评定试验 |
China National Standards RE |
English PDF |
| Find out:25312Items | To Page of: First -Previous-Next -Last | [127] [128] [129] [130] [131] [132] [133] |
+86-755-25831330
