GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 32571-2016 |
Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards Co |
English PDF |
GB/T 32570-2016 |
steel plates and strips for freight Containers 集装箱用钢板及钢带 |
China National Standards Co |
English PDF |
GB/T 32565-2016 |
Surface chemical analysis—ReCording and reporting data in Auger electron spectroscopy (AES) 表面化学分析 俄歇电子能谱(AES)数据记录与报告的规范要求 |
China National Standards Co |
English PDF |
GB/T 32498-2016 |
Metal matrix Composites—Tensile testing—Method of test at ambient temperature 金属基复合材料 拉伸试验 室温试验方法 |
China National Standards Co |
English PDF |
GB/T 32497-2016 |
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced Composites—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards Co |
English PDF |
GB/T 32496-2016 |
Test method for volume fraction of reinforcement in metal matrix Composites—Image analysis method 金属基复合材料增强体体积含量试验方法 图像分析法 |
China National Standards Co |
English PDF |
GB/T 32495-2016 |
Surface chemical analysis—SeCondary-ion mass spectrometry—Method for depth profiling of arsenic in silicon 表面化学分析 二次离子质谱 硅中砷的深度剖析方法 |
China National Standards Co |
English PDF |
GB/T 32493-2016 |
Test method of ballistic resistance for fibre reinforced Composites—Specific absorbed energy by perforation method 纤维增强复合材料抗弹性能试验方法 贯穿比吸能法 |
China National Standards Co |
English PDF |
GB/T 32492-2016 |
Content of dimethyl ether in liquefied petroleum gas by gas chromatography 液化石油气中二甲醚含量气相色谱分析法 |
China National Standards Co |
English PDF |
GB/T 32488-2016 |
Ductile iron pipes and fittings——Seal Coats for cement mortar linings 球墨铸铁管和管件 水泥砂浆内衬密封涂层 |
China National Standards Co |
English PDF |
GB/T 1796.5-2016 |
Tyre valves—Part 5: Tyre valves for large Core chamber 轮胎气门嘴 第5部分:大芯腔气门嘴 |
China National Standards Co |
English PDF |
GB/T 6730.73-2016 |
Iron ores—Determination of total iron Content—EDTA photometric titration method 铁矿石 全铁含量的测定 EDTA光度滴定法 |
China National Standards Co |
English PDF |
GB/T 6730.72-2016 |
Iron ores—Determination of arsenic, chromium, cadmium, lead and mercury Content—Inductively coupled plasma-mass spectrometry method (ICP-MS) 铁矿石 砷、铬、镉、铅和汞含量的测定 电感耦合等离子体质谱法(ICP-MS) |
China National Standards Co |
English PDF |
GB/T 6730.36-2016 |
Iron ores—Determination of cupper Content—Flame atomic absorption spectrometric method 铁矿石 铜含量的测定 火焰原子吸收光谱法 |
China National Standards Co |
English PDF |
GB/T 4336-2016 |
Carbon and low-alloy steel—Determination of multi-element Contents—Spark discharge atomic emission spectrometric method (routine method) 碳素钢和中低合金钢 多元素含量的测定 火花放电原子发射光谱法(常规法) |
China National Standards Co |
English PDF |
GB/T 32573-2016 |
SiliCon powder—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace 硅粉 总碳含量的测定 感应炉内燃烧后红外吸收法 |
China National Standards Co |
English PDF |
GB/T 32550-2016 |
Corrosion of metals and alloys—Determination of the critical pitting temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 |
China National Standards Co |
English PDF |
GB/T 32548-2016 |
Steel and iron—Determination of tin, antimony, cerium, lead and bismuth—Inductively Coupled plasma mass spectrometric method 钢铁 锡、锑、铈、铅和铋的测定 电感耦合等离子体质谱法 |
China National Standards Co |
English PDF |
GB/T 17897-2016 |
Corrosion of metals and alloys—Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 |
China National Standards Co |
English PDF |
GB/T 32561.3-2016 |
Measuring method for chalCogenide infrared optical glass—Part 3: Impurity 红外光学硫系玻璃测试方法 第3部分:杂质 |
China National Standards Co |
English PDF |
GB/T 32561.2-2016 |
Measuring method for chalCogenide infrared optical glass—Part 2: Degree of striae 红外光学硫系玻璃测试方法 第2部分:条纹度 |
China National Standards Co |
English PDF |
GB/T 32561.1-2016 |
Measuring method for chalCogenide infrared optical glass—Part 1: Homogeneity 红外光学硫系玻璃测试方法 第1部分:均匀性 |
China National Standards Co |
English PDF |
GB/T 32559-2016 |
Infrared diamond-like carbon Coating 红外类金刚石膜 |
China National Standards Co |
English PDF |
GB/Z 32501-2016 |
General requirements for Communication system of smart grid user side 智能电网用户端通信系统一般要求 |
China National Standards Co |
English PDF |
GB/Z 18509-2016 |
Electromagnetic Compatibility—Guide to the drafting of electromagnetic compatibility standards 电磁兼容 电磁兼容标准起草导则 |
China National Standards Co |
English PDF |
GB/Z 16935.6-2016 |
Insulation Coordination for equipment within low-voltage systems—Part 2-2: Interface considerations—Application guide 低压系统内设备的绝缘配合 第2-2部分:交界面考虑 应用指南 |
China National Standards Co |
English PDF |
GB/T 7144-2016 |
Coloured cylinder mark for gases 气瓶颜色标志 |
China National Standards Co |
English PDF |
GB/T 4854.9-2016 |
ACoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分:确定基准听阈级的优选测试条件 |
China National Standards Co |
English PDF |
GB/T 3797-2016 |
Electrical Control assemblies 电气控制设备 |
China National Standards Co |
English PDF |
GB/T 3767-2016 |
ACoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 |
China National Standards Co |
English PDF |
GB/T 32620.1-2016 |
Lead-acid batteries used for electric road vehicles—Part 1: Technical Condition 电动道路车辆用铅酸蓄电池 第1部分:技术条件 |
China National Standards Co |
English PDF |
GB/T 32557.2-2016 |
Polygonal taper interface with flange Contact surface—Part 2: Dimensions and designation of receivers 带有法兰接触面的多棱锥接口 第2部分:安装孔尺寸和标记 |
China National Standards Co |
English PDF |
GB/T 32557.1-2016 |
Polygonal taper interface with flange Contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分:柄部尺寸和标记 |
China National Standards Co |
English PDF |
GB/T 32556.3-2016 |
Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flange Contact surface 带端键传动的铣刀杆 第3部分:带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards Co |
English PDF |
GB/T 32544-2016 |
ACoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes 桥式与门式起重机金属结构声发射检测及结果评定方法 |
China National Standards Co |
English PDF |
GB/T 32541-2016 |
Quality Control systems for heat treatment 热处理质量控制体系 |
China National Standards Co |
English PDF |
GB/T 32540-2016 |
Technical requirements for accuracy-Controlled gas nitriding heat treatment 精密气体渗氮热处理技术要求 |
China National Standards Co |
English PDF |
GB/T 32538.2-2016 |
Agricultural vehicles—Mechanical Connections on towed vehicles—Part 2: Coupling ring 40 with socket 农业车辆 被牵引车辆的机械连接装置 第2部分:带座孔的40连接环 |
China National Standards Co |
English PDF |
GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical Connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分:50mm/30mm横截面的挂接环尺寸 |
China National Standards Co |
English PDF |
GB/T 32533-2016 |
Covered electrodes for manual metal arc welding of high-strength steels 高强钢焊条 |
China National Standards Co |
English PDF |
GB/T 32532-2016 |
NonConsumable tungsten electrodes for arc welding and cutting 焊接与切割用钨极 |
China National Standards Co |
English PDF |
GB/T 32528-2016 |
Printing machinery—hard-Cover book binding line 印刷机械 精装书籍联动线 |
China National Standards Co |
English PDF |
GB/T 32524.2-2016 |
ACoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分:反射面上方近似自由场的工程法 |
China National Standards Co |
English PDF |
GB/T 32524.1-2016 |
ACoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分:半消声室精密法 |
China National Standards Co |
English PDF |
GB/T 32523-2016 |
ACoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—Travelling wave tube method 声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法 |
China National Standards Co |
English PDF |
GB/T 32522-2016 |
ACoustics—Electroacoustic characteristics and measurements of spherically focusing ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards Co |
English PDF |
GB/T 32518.1-2016 |
Field test Code of controlled shunt reactor of extra high voltage—Part 1: Multistage controlled shunt reactor 超高压可控并联电抗器现场试验技术规范 第1部分:分级调节式 |
China National Standards Co |
English PDF |
GB/T 32517-2016 |
Installation Couplers intended for permanent connection in fixed installations 固定装置中永久性连接用安装式耦合器 |
China National Standards Co |
English PDF |
GB/T 32516-2016 |
Thyristor valves of multistage Controlled shunt reactors in extra high-voltage transmission systems 超高压分级式可控并联电抗器晶闸管阀 |
China National Standards Co |
English PDF |
GB/T 32514.3-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 3: Current sensing Coil 电阻焊 焊接电流的测量 第3部分:电流感应线圈 |
China National Standards Co |
English PDF |
GB/T 32514.2-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 2: Welding current meter with current sensing Coil 电阻焊 焊接电流的测量 第2部分:带电流感应线圈的焊接电流测量仪 |
China National Standards Co |
English PDF |
GB/T 32508-2016 |
Quantitative determination of Corrosive sulfur (dibenzyl disulfide , DBDS) in insulating liquids 绝缘油中腐蚀性硫(二苄基二硫醚)定量检测方法 |
China National Standards Co |
English PDF |
GB/T 32506-2016 |
Code for operation and maintenance for excitation system of pumped-storage unit 抽水蓄能机组励磁系统运行检修规程 |
China National Standards Co |
English PDF |
GB/T 32504-2016 |
Civil lead-acid battery technical Code for safety 民用铅酸蓄电池安全技术规范 |
China National Standards Co |
English PDF |
GB/T 32503.1-2016 |
Household and similar adjustable frequency Converter safety—Part 1: General requirements 家用和类似用途变频控制器的安全 第1部分:通用要求 |
China National Standards Co |
English PDF |
GB/T 32502-2016 |
Overhead electrical stranded Conductors composite core supported/reinforced 复合材料芯架空导线 |
China National Standards Co |
English PDF |
GB/T 32499-2016 |
Connecting devices—Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units 连接器件 任何材料的夹紧件用铝线的连接器件及铝基夹紧件用铜线的连接器件 |
China National Standards Co |
English PDF |
GB/T 32484-2016 |
Watch-cases and accessories—Vapour phase deposited Coatings 表壳体及其附件 气相沉积镀层 |
China National Standards Co |
English PDF |
GB/T 32483.3-2016 |
Energy performance of lamp Controlgear—Part 3: Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear 灯控制装置的效率要求 第3部分:卤钨灯和LED模块 控制装置效率的测量方法 |
China National Standards Co |
English PDF |
GB/T 32482.1-2016 |
LED—Binning—Part 1: General requirements and white Colour grid LED 分选 第1部分:一般要求和白光栅格 |
China National Standards Co |
English PDF |
GB/T 32480-2016 |
Textile machinery—Mixing bale openers for Cotton spinning—Vocabulary and principles of construction 纺织机械 棉纺用开包混棉机 术语、定义和结构原理 |
China National Standards Co |
English PDF |
GB/T 32477-2016 |
Plastics—Determination of total chlorine Content in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定 |
China National Standards Co |
English PDF |
GB/T 32476-2016 |
Rubber and plastic hoses and hose assemblies with internal vapour reCovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 |
China National Standards Co |
English PDF |
GB/T 32475-2016 |
Rubber hose and hose assemblies for Coal seam water injection,gas drainage and drilling plugging 煤层注水、钻孔封堵及瓦斯排放橡胶软管和软管组合件 |
China National Standards Co |
English PDF |
GB/T 32474-2016 |
Rubber hoses and hose assemblies for petroleum drilling well Control equipments 石油钻井井控设备用橡胶软管及软管组合件 |
China National Standards Co |
English PDF |
GB/T 32473-2016 |
Ion exchange resins for Condensate polishing treatment 凝结水精处理用离子交换树脂 |
China National Standards Co |
English PDF |
GB/T 6882-2016 |
ACoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms 声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法 |
China National Standards Co |
English PDF |
GB/T 5587-2016 |
Basic shapes,dimensions,symbols and notations of silver based electrical Contacts 银基电触头基本形状、尺寸、符号及标注 |
China National Standards Co |
English PDF |
GB/T 5586-2016 |
Test methods for essential property of electrical Contact materials 电触头材料基本性能试验方法 |
China National Standards Co |
English PDF |
GB/T 31052.7-2016 |
Lifting appliances—Code of inspection and maintenance—Part 7: Derrick cranes 起重机械 检查与维护规程 第7部分:桅杆起重机 |
China National Standards Co |
English PDF |
GB/T 31052.10-2016 |
Lifting appliances—Code of inspection and maintenance—Part 10: Series lifting equipments 起重机械 检查与维护规程 第10部分:轻小型起重设备 |
China National Standards Co |
English PDF |
GB/T 2900.20-2016 |
Electrotechnical terminology High-voltage switchgear and Controlgear 电工术语 高压开关设备和控制设备 |
China National Standards Co |
English PDF |
GB/T 25774.2-2016 |
Test methods for welding Consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 |
China National Standards Co |
English PDF |
GB/T 22715-2016 |
Impulse voltage withstand levels of form-wound stator Coils for rotating a.c. machines 旋转交流电机定子成型线圈耐冲击电压水平 |
China National Standards Co |
English PDF |
GB/T 20835-2016 |
Guides for magnetization test of generator stator Core 发电机定子铁心磁化试验导则 |
China National Standards Co |
English PDF |
GB/T 20408-2016 |
Radio-Controlled analogue clocks 指针式电波钟 |
China National Standards Co |
English PDF |
GB/T 20343-2016 |
Agricultural tractors and machinery—Connection of implements via three point linkage—Clearance zone around implement 农业拖拉机和机械 三点悬挂机具的连接装置 机具周围的间隙范围 |
China National Standards Co |
English PDF |
GB/T 20341-2016 |
Tractors and self-propelled machinery for agriculture—Operator Controls—Actuating forces, displacement, location and method of operation 农业拖拉机和自走式机械 操作者操纵装置 操纵力、操纵方向、操纵位置和方法 |
China National Standards Co |
English PDF |
GB/T 20041.25-2016 |
Conduit systems for cable management— Part 25: Particular requirements for conduit fixing devices 电缆管理用导管系统 第25部分:导管固定装置的特殊要求 |
China National Standards Co |
English PDF |
GB/T 19749.1-2016 |
Coupling capacitors and capacitor dividers—Part 1: General rules 耦合电容器和电容分压器 第1部分:总则 |
China National Standards Co |
English PDF |
GB/T 19355.3-2016 |
Zinc Coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 3: Sherardizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第3部分:粉末渗锌 |
China National Standards Co |
English PDF |
GB/T 19355.2-2016 |
Zinc Coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 2: Hot dip galvanizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分:热浸镀锌 |
China National Standards Co |
English PDF |
GB/T 19355.1-2016 |
Zinc Coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 1: General principles of design and corrosion resistance 锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分:设计与防腐蚀的基本原则 |
China National Standards Co |
English PDF |
GB/T 18802.21-2016 |
Low-voltage surge protective devices—Part 21: Surge protective devices Connected to telecommunications and signaling networks—Performance requirements and testing methods 低压电涌保护器 第21部分:电信和信号网络的电涌保护器(SPD) 性能要求和试验方法 |
China National Standards Co |
English PDF |
GB/T 17885-2016 |
Electromechanical Contactors for household and similar purposes 家用及类似用途机电式接触器 |
China National Standards Co |
English PDF |
GB/T 16296.2-2016 |
ACoustics—Audiometric test methods—Part 2: Sound-field audiometry with pure-tone and narrow-band test signals 声学 测听方法 第2部分:用纯音及窄带测试信号的声场测听 |
China National Standards Co |
English PDF |
GB/T 14048.7-2016 |
Low-voltage switchgear and Controlgear—Part 7-1:Ancillary equipment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分:辅助器件 铜导体的接线端子排 |
China National Standards Co |
English PDF |
GB/T 14048.18-2016 |
Low-voltage switchgear and Controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分:辅助器件 熔断器接线端子排的安全要求 |
China National Standards Co |
English PDF |
GB/T 12009.4-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate Content 塑料 聚氨酯生产用芳香族异氰酸酯 第4部分:异氰酸根含量的测定 |
China National Standards Co |
English PDF |
GB/T 10233-2016 |
Basic testing method for low-voltage switchgear and Controlgear assemblies 低压成套开关设备和电控设备基本试验方法 |
China National Standards Co |
English PDF |
GB/T 7920.4-2016 |
Concrete machinery terminology 混凝土机械术语 |
China National Standards Co |
English PDF |
GB/T 32543-2016 |
Building Construction machinery and equipment—Concrete delivery pipes—Connection types and safety requirements 建筑施工机械与设备 混凝土输送管 连接型式和安全要求 |
China National Standards Co |
English PDF |
GB/T 819.2-2016 |
Countersunk flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws 十字槽沉头螺钉 第2部分:8.8级、不锈钢及有色金属螺钉 |
China National Standards Co |
English PDF |
GB/T 819.1-2016 |
Countersunk flat head screws with cross recess—Part 1: Property class 4.8 十字槽沉头螺钉 第1部分:4.8级 |
China National Standards Co |
English PDF |
GB/T 69-2016 |
Slotted raised Countersunk head screws 开槽半沉头螺钉 |
China National Standards Co |
English PDF |
GB/T 68-2016 |
Slotted Countersunk flat head screws 开槽沉头螺钉 |
China National Standards Co |
English PDF |
GB/T 29024.2-2016 |
Determination of particle size distribution—Single particle light interaction methods—Part 2: Light scattering liquid-borne particle Counter 粒度分析 单颗粒的光学测量方法 第2部分:液体颗粒计数器光散射法 |
China National Standards Co |
English PDF |
GB/T 29023.2-2016 |
Measurement and characterization of particles by aCoustic method—Part 2: Guidelines for linear theory 超声法颗粒测量与表征 第2部分:线性理论准则 |
China National Standards Co |
English PDF |
GB/T 20303.1-2016 |
Cranes—Cabins and Control stations—Part 1: General 起重机 司机室和控制站 第1部分:总则 |
China National Standards Co |
English PDF |
GB/T 19142-2016 |
Packaging for export Commodity—General rule 出口商品包装 通则 |
China National Standards Co |
English PDF |
Find out:21489Items | To Page of: First -Previous-Next -Last | [75] [76] [77] [78] [79] [80] [81] |