GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 18082.1-2012 |
Health protection zone for leather and fur and manufactured producTS industry - Part 1:Leather tanning industry 皮革、毛皮及其制品业卫生防护距离 第1部分:皮革鞣制加工业 |
China National Standards TS |
English PDF |
GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety requiremenTS for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2(包括)导线的夹紧件的通用要求和特殊要求 |
China National Standards TS |
English PDF |
GB/T 28794-2012 |
Technical requiremenTS of oily-water separation system fishing vessel 渔业船舶油污水分离系统技术要求 |
China National Standards TS |
English PDF |
GB/T 28793-2012 |
Technical requiremenTS of fuel saving for fishing vessel diesel engines 渔业船舶柴油机节油技术要求 |
China National Standards TS |
English PDF |
GB/T 28790-2012 |
Technical requiremenTS and measuring methods of fuel saving devices for diesel engines of fishing vessel 渔业船舶柴油机节油装置技术条件及检测方法 |
China National Standards TS |
English PDF |
GB/T 8017-2012 |
Standard test method for vapor pressure of petroleum producTS (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards TS |
English PDF |
GB/T 7631.13-2012 |
LubricanTS,industrial oils and related products(class L) - Classification - Part 13: Family A(Total loss systems) 润滑剂、工业用油和有关产品(L类)的分类 第13部分:A组(全损耗系统) |
China National Standards TS |
English PDF |
GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measuremenTS on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分:50MW以上,额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards TS |
English PDF |
GB/T 6075.1-2012 |
Mechanical vibration - Evaluation of machine vibration by measuremenTS on non-rotating parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分:总则 |
China National Standards TS |
English PDF |
GB/T 4214.7-2012 |
Household and similar electrical appliances - Test code for determination of airborne acoustical noise - Particular requiremenTS for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards TS |
English PDF |
GB/T 28803-2012 |
Directives for risk management of consumer producTS safety 消费品安全风险管理导则 |
China National Standards TS |
English PDF |
GB/T 28802-2012 |
General technical requiremenTS for jade carving 玉器雕琢通用技术要求 |
China National Standards TS |
English PDF |
GB/T 28800-2012 |
Air gun pelleTS 气枪弹 |
China National Standards TS |
English PDF |
GB/T 28779-2012 |
Rolling bearings - Insert bearing uniTS - Classification 滚动轴承 带座外球面球轴承 分类 |
China National Standards TS |
English PDF |
GB/T 28774-2012 |
Synchronous belt drives - Metric pitch - Trapezoidal toothed synchronous belTS 同步带传动 米制节距 梯形齿同步带 |
China National Standards TS |
English PDF |
GB/T 28773-2012 |
Tooth-wedge belTS 齿楔带 |
China National Standards TS |
English PDF |
GB/T 28767-2012 |
Classification of automotive gear lubricanTS 车辆齿轮油分类 |
China National Standards TS |
English PDF |
GB/T 19876-2012 |
Safety of machinery ― Positioning of safeguards with respect to the approach speeds of parTS of the human body 机械安全 与人体部位接近速度相关的安全防护装置的定位 |
China National Standards TS |
English PDF |
GB/T 19869.2-2012 |
Welding procedure qualification test for aluminum and iTS alloys 铝及铝合金的焊接工艺评定试验 |
China National Standards TS |
English PDF |
GB/T 16630-2012 |
LubricanTS for refrigeration compressors 冷冻机油 |
China National Standards TS |
English PDF |
GB/T 13441.4-2012 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effecTS of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems 机械振动与冲击 人体暴露于全身振动的评价 第4部分:振动和旋转运动对固定导轨运输系统中的乘客及乘务员舒适影响的评价指南 |
China National Standards TS |
English PDF |
GB/T 13346-2012 |
Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatmenTS on iron or steel 金属及其它无机覆盖层 钢铁上经过处理的镉电镀层 |
China National Standards TS |
English PDF |
GB/T 11348.2-2012 |
Mechanical vibration - Evaluation of machines vibration by measuremenTS on rotating shafts - Part 2: Land-based steam turbine - generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min 机械振动 在旋转轴上测量评价机器的振动 第2部分:功率大于50MW,额定工作转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards TS |
English PDF |
GB/T 10716-2012 |
Synchronous belt drives - Automotive belTS - Determination of physical properties 同步带传动 汽车同步带 物理性能试验方法 |
China National Standards TS |
English PDF |
GB/T 9630-2012 |
Dimensions of pot-cores made of magnetic oxides and associated parTS 磁性氧化物制成的罐形磁心及其附件的尺寸 |
China National Standards TS |
English PDF |
GB/T 7826-2012 |
Analysis techniques for system reliability - Procedure for failure mode and effecTS analysis(FMEA) 系统可靠性分析技术 失效模式和影响分析(FMEA)程序 |
China National Standards TS |
English PDF |
GB/T 6996-2012 |
Test charTS of transparencies for television 透射式电视测试图 |
China National Standards TS |
English PDF |
GB/T 6379.3-2012 |
Accuracy(trueness and precision) of measurement methods and resulTS - Part 3:Intermediate measures of the precision of a standard measurement method 测量方法与结果的准确度(正确度与精密度) 第3部分:标准测量方法精密度的中间度量 |
China National Standards TS |
English PDF |
GB/T 4937.3-2012 |
Semiconductor devices - Mechanical and climatic tesTS methods - Part 3: External visual examination 半导体器件 机械和气候试验方法 第3部分:外部目检 |
China National Standards TS |
English PDF |
GB/T 28880-2012 |
Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instrumenTS 无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定 |
China National Standards TS |
English PDF |
GB/T 28879-2012 |
Nomenclature of model for electrotechnical instrumenTS 电工仪器仪表产品型号编制方法 |
China National Standards TS |
English PDF |
GB/T 28878.1-2012 |
Specification of the rotating component in space science experimenTS - Part 1:General requirements of design 空间科学实验转动部件规范 第1部分:设计总则 |
China National Standards TS |
English PDF |
GB/T 28877-2012 |
General requiremenTS for space science experiments 空间科学实验通用要求 |
China National Standards TS |
English PDF |
GB/T 28876.1-2012 |
Flammability of materials in space experimental facilities - Part 1: RequiremenTS 空间实验设备使用材料的可燃性 第1部分:要求 |
China National Standards TS |
English PDF |
GB/T 28874-2012 |
Specification for level of data producTS for space science experiments 空间科学实验数据产品分级规范 |
China National Standards TS |
English PDF |
GB/T 28873-2012 |
General guide of environmental scanning electron microscopy for biological effecTS on topography induced by nanoparticles 纳米颗粒生物形貌效应的环境扫描电子显微镜检测方法通则 |
China National Standards TS |
English PDF |
GB/T 28859-2012 |
Encapsulating material of powdered epoxy for electronic componenTS 电子元器件用环氧粉末包封料 |
China National Standards TS |
English PDF |
GB/T 28858-2012 |
Encapsulating material of phenolic for electronic componenTS 电子元器件用酚醛包封料 |
China National Standards TS |
English PDF |
GB/T 18216.1-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requiremenTS 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第1部分:通用要求 |
China National Standards TS |
English PDF |
GB/T 16608.55-2012 |
Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacTS, 11mm×7,5mm (max)base 有或无机电继电器 第55部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,11mm×7.5mm(最大)底座 |
China National Standards TS |
English PDF |
GB/T 16608.54-2012 |
Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacTS, 15mm×7,5mm base 有或无机电继电器 第54部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,15mm×7.5mm底座 |
China National Standards TS |
English PDF |
GB/T 16608.53-2012 |
Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacTS, 14mm×9mm base 有或无机电继电器 第53部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,14mm×9mm底座 |
China National Standards TS |
English PDF |
GB/T 16608.52-2012 |
Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacTS, 20mm×10mm base 有或无机电继电器 第52部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,20mm×10mm底座 |
China National Standards TS |
English PDF |
GB/T 12859.2-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic componenTS (IECQ) - Part 2: Sectional specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分:分规范- 鉴定批准 |
China National Standards TS |
English PDF |
GB/T 12859.201-2012 |
Piezoelectric ceramic resonators - A specification in the quality assessment System for electronic componenTS - Part 2-1: Blank detail specification-Assessment level E 电子元器件质量评定体系规范 压电陶瓷谐振器 第2-1部分:空白详细规范-评定水平E |
China National Standards TS |
English PDF |
GB/T 12859.1-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic componenTS(IECQ) - Part 1: Generic specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第1部分:总规范- 鉴定批准 |
China National Standards TS |
English PDF |
GB/T 12796.1-2012 |
Permanent ferrite magneTS - Part 1: Generic specification 永磁铁氧体磁体 第1部分:总规范 |
China National Standards TS |
English PDF |
GB/T 12273.501-2012 |
Quartz crystal uniTS A specification in the quality assessment system for electronic components Part 5.1: Blank detail specification- qualification approval 石英晶体元件 电子元器件质量评定体系规范 第5.1部分:空白详细规范 鉴定批准 |
China National Standards TS |
English PDF |
GB/T 12079-2012 |
MeasuremenTS of the photoelectric properties for X-ray tubes X射线管光电性能测试方法 |
China National Standards TS |
English PDF |
GB/T 15566.9-2012 |
Public information guidance system - Setting principles and requiremenTS - Part 9: Tourist attraction 公共信息导向系统 设置原则与要求 第9部分:旅游景区 |
China National Standards TS |
English PDF |
GB/T 4798.9-2012 |
Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Microclimates inside producTS 环境条件分类 环境参数组分类及其严酷程度分级 产品内部的微气候 |
China National Standards TS |
English PDF |
GB/T 28827.1-2012 |
Information technology service - Operations and maintenance -Part 1: General requiremenTS 信息技术服务 运行维护 第1部分:通用要求 |
China National Standards TS |
English PDF |
GB/T 28826.1-2012 |
Information technology - Common biometric exchange formaTS framework - Part 1: Data element specification 信息技术 公用生物特征识别交换格式框架 第1部分:数据元素规范 |
China National Standards TS |
English PDF |
GB/T 28824-2012 |
Information technology - Learning,education and training - Digital righTS expression language 信息技术 学习、教育和培训 数字权利描述语言 |
China National Standards TS |
English PDF |
GB/T 28821-2012 |
Technical requiremenTS of relational database management system 关系数据管理系统技术要求 |
China National Standards TS |
English PDF |
GB/T 28758-2012 |
Cranes - Competency requiremenTS for crane inspectors 起重机 检查人员的资格要求 |
China National Standards TS |
English PDF |
GB/T 28757-2012 |
Cranes other than mobile,tower and floating cranes and tower cranes - General requiremenTS for stability 除流动式、塔式和浮式起重机以外的起重机 稳定性基本要求 |
China National Standards TS |
English PDF |
GB/T 2820.11-2012 |
Reciprocating internal combustion engine driven alternating current generating seTS - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods 往复式内燃机驱动的交流发电机组 第11部分:旋转不间断电源 性能要求和试验方法 |
China National Standards TS |
English PDF |
GB/T 2423.50-2012 |
Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for componenTS 环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验 |
China National Standards TS |
English PDF |
GB/T 16571-2012 |
RequiremenTS for security systems in museums and units of cultural heritage protection 博物馆和文物保护单位安全防范系统要求 |
China National Standards TS |
English PDF |
GB/T 10593.2-2012 |
Method of the measuring environmental parameters for electric and electronic producTS - Part 2:Salt mist 电工电子产品环境参数测量方法 第2部分:盐雾 |
China National Standards TS |
English PDF |
GB 28755-2012 |
Safety rules for simple lifTS 简易升降机安全规程 |
China National Standards TS |
English PDF |
GB/T 28752-2012 |
Test method for lateral spread of flame on building and transport producTS in vertical configuration 火焰在垂直表面的横向蔓延试验方法 |
China National Standards TS |
English PDF |
GB/T 28748-2012 |
Metadata for gems and jewelry producTS 珠宝玉石饰品产品元数据 |
China National Standards TS |
English PDF |
GB/T 28837-2012 |
Requirement on services of quarantine treatmenTS of wood packing material 木质包装检疫处理服务质量要求 |
China National Standards TS |
English PDF |
GB/T 28836-2012 |
Credit evaluating index elemenTS for international logistics enterprises 国际物流企业信用评价指标要素 |
China National Standards TS |
English PDF |
GB/T 28835-2012 |
International logistics legal liability insurance - Basic elemenTS of international freight forwarding legal liability insurance 国际物流责任保险 国际货运代理人责任险基本要素 |
China National Standards TS |
English PDF |
GB/T 28834-2012 |
International logistics legal liability insurance - Basic elemenTS of international freight forwarding B/L legal liability insurance 国际物流责任保险 国际货运代理提单责任险基本要素 |
China National Standards TS |
English PDF |
GB/T 28832-2012 |
RequirmenTS on services of preparation for international freight forwarding documents 国际货运单证缮制质量要求 |
China National Standards TS |
English PDF |
GB/T 28831-2012 |
Code of preparation for international freight forwarding documenTS 国际货运单证缮制规范 |
China National Standards TS |
English PDF |
GB/T 28829-2012 |
RequiremenTS for supermarket classification 超市等级划分要求 |
China National Standards TS |
English PDF |
GB/T 28923.5-2012 |
Mapping requiremenTS for the natural disaster remote sensing thematic maps - Part 5: Relief and recovery assessment thematic maps 自然灾害遥感专题图产品制作要求 第5部分:救助与恢复重建评估专题图产品 |
China National Standards TS |
English PDF |
GB/T 28923.4-2012 |
Mapping requiremenTS for the natural disaster remote sensing thematic maps - Part 4: Loss assessment thematic maps 自然灾害遥感专题图产品制作要求 第4部分:损失评估专题图产品 |
China National Standards TS |
English PDF |
GB/T 28923.3-2012 |
Mapping requiremenTS for the natural disaster remote sensing thematic maps - Part 3: Risk assessment thematic maps 自然灾害遥感专题图产品制作要求 第3部分:风险评估专题图产品 |
China National Standards TS |
English PDF |
GB/T 28923.2-2012 |
Mapping requiremenTS for the natural disasters remote sensing thematic maps - Part 2: Monitoring thematic maps 自然灾害遥感专题图产品制作要求 第2部分:监测专题图产品 |
China National Standards TS |
English PDF |
GB/T 28923.1-2012 |
Mapping requiremenTS for the natural disaster remote sensing thematic maps - Part 1: Classification, codes and mapping 自然灾害遥感专题图产品制作要求 第1部分:分类、编码与制图 |
China National Standards TS |
English PDF |
GB/T 28920-2012 |
Operation and management for dangerous solids and liquids in educational experimenTS 教学实验用危险固体、液体的使用与保管 |
China National Standards TS |
English PDF |
GB/T 18029.21-2012 |
Wheelchairs - Part 21: RequiremenTS and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers 轮椅车 第21部分:电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法 |
China National Standards TS |
English PDF |
GB 50809-2012 |
Code for design of silicon integrated circuiTS wafer fab 硅集成电路芯片工厂设计规范 |
China National Standards TS |
English PDF |
GB 28709-2012 |
Garden patrol minibus - Seat belTS and seat belt anchorages 非公路旅游观光车 座椅安全带及其固定器 |
China National Standards TS |
English PDF |
GB 19402-2012 |
Safety requiremenTS for passengers funiculars 客运地面缆车安全要求 |
China National Standards TS |
English PDF |
GB/T 28719-2012 |
Rubber sealing gaskeTS used in plate heat exchangers 板式热交换器用橡胶密封垫片 |
China National Standards TS |
English PDF |
GB/T 6003.1-2012 |
Test sieves - Technical requiremenTS and testing - Part 1: Test sieves of metal wire cloth 试验筛 技术要求和检验 第1部分:金属丝编织网试验筛 |
China National Standards TS |
English PDF |
GB/T 28707-2012 |
Disc spring supporTS and hangers 碟簧支吊架 |
China National Standards TS |
English PDF |
GB/T 28704-2012 |
Non-destructive testing - Test method for ultrasonic guided wave testing based on magnetostrictive effecTS 无损检测 磁致伸缩超声导波检测方法 |
China National Standards TS |
English PDF |
GB/T 28699-2012 |
Steel structure protection General requiremenTS of coatings 钢结构防护涂装通用技术条件 |
China National Standards TS |
English PDF |
GB/T 17446-2012 |
Fluid power systems and componenTS - Vocabulary 流体传动系统及元件 词汇 |
China National Standards TS |
English PDF |
GB/T 11828.3-2012 |
InstrumenTS for stage measurement - Part 3 :Groundwater stage gauge 水位测量仪器 第3部分:地下水位计 |
China National Standards TS |
English PDF |
GB/T 28713.3-2012 |
Enhanced heat transfer elemenTS used in tube-shell heat exchangers - Part 3:Wavy tubes 管壳式热交换器用强化传热元件 第3部分:波节管 |
China National Standards TS |
English PDF |
GB/T 28713.2-2012 |
Enhanced heat transfer elemenTS used in tube-shell heat exchangers- Part 2:Stainless steel corrugated tubes 管壳式热交换器用强化传热元件 第2部分:不锈钢波纹管 |
China National Standards TS |
English PDF |
GB/T 28713.1-2012 |
Enhanced heat transfer elemenTS used in tube-shell heat exchangers -Part 1:Threaded tubes 管壳式热交换器用强化传热元件 第1部分:螺纹管 |
China National Standards TS |
English PDF |
GB/T 28693-2012 |
Tractors and machinery for agricultural and forestry - RequiremenTS of the lighting and light-signalling devices 农林拖拉机和机械 照明和光信号装置的要求 |
China National Standards TS |
English PDF |
GB/T 28690-2012 |
Resin-bonded sand reclamation equipment - Technical requiremenTS 树脂砂再生成套设备 技术条件 |
China National Standards TS |
English PDF |
GB/T 28689-2012 |
Efficient rotator mixer - Technical requiremenTS 高效转子混砂机 技术条件 |
China National Standards TS |
English PDF |
GB/T 28688-2012 |
Low pressure die casting machine - Technical requiremenTS 低压铸造机 技术条件 |
China National Standards TS |
English PDF |
GB/T 28686-2012 |
Gas turbines thermodynamic performance tesTS 燃气轮机热力性能试验 |
China National Standards TS |
English PDF |
GB/T 28679-2012 |
Remanufacturing of automotive componenTS - Assembly 汽车零部件再制造 装配 |
China National Standards TS |
English PDF |
GB/T 28678-2012 |
Remanufacturing of automotive componenTS - Pre-delivery inspection 汽车零部件再制造 出厂验收 |
China National Standards TS |
English PDF |
GB/T 28677-2012 |
Remanufacturing of automotive componenTS - Cleaning 汽车零部件再制造 清洗 |
China National Standards TS |
English PDF |
GB/T 28676-2012 |
Remanufacturing of automotive componenTS - Classification 汽车零部件再制造 分类 |
China National Standards TS |
English PDF |
Find out:12885Items | To Page of: First -Previous-Next -Last | [64] [65] [66] [67] [68] [69] [70] |