GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 38836-2020 |
Technical specification for construction of rural household latrine with three-compartment septic tank 农村三格式户厕建设技术规范 |
China National Standards with |
English PDF |
GB/T 20888.2-2020 |
Machinery for forestry—Safety requirements and testing for pole-mounted powered pruners—Part 2:Machines for use with back-pack power source 林业机械 杆式动力修枝锯安全要求和试验 第2部分:背负式动力修枝锯 |
China National Standards with |
English PDF |
GB/T 20888.1-2020 |
Machinery for forestry—Safety requirements and testing for pole-mounted powered pruners—Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分:侧挂式动力修枝锯 |
China National Standards with |
English PDF |
GB/T 19725.2-2020 |
Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held ,powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit 农林机械 便携式割灌机和割草机安全要求和试验 第2部分:背负式动力机械 |
China National Standards with |
English PDF |
GB/T 19725.1-2020 |
Agricultural and forestry machinery—Safety requirements and testing for portable,hand-held,powered brush-cutters and grass-trimmers—Part 1:Machines fitted with an integral combustion engine 农林机械 便携式割灌机和割草机安全要求和试验 第1部分:侧挂式动力机械 |
China National Standards with |
English PDF |
GB/T 38594-2020 |
Water supply devices with superimposing pipe pressure 管网叠压供水设备 |
China National Standards with |
English PDF |
GB/T 20840.102-2020 |
Instrument transformers—Part 102: Ferroresonance oscillations in substations with inductive voltage transformers 互感器 第102部分:带有电磁式电压互感器的变电站中的铁磁谐振 |
China National Standards with |
English PDF |
GB/T 16857.901-2020 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第901部分:配置多影像探测系统的坐标测量机 |
China National Standards with |
English PDF |
GB/T 12706.4-2020 |
Power cables with extruded insulation and their accessories for rated voltages from l kV (Um=1.2 kV) up to 35 kV(Um=40.5 kV)—Part 4:Test requirements on accessories for cables with rated voltages from 6 kV(Um=7.2 kV) up to 35 kV(Um=40.5 kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第4部分:额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)电力电缆附件试验要求 |
China National Standards with |
English PDF |
GB/T 12706.3-2020 |
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)—Part 3: Cables for rated voltages of 35kV(Um=40.5kV) 额定电压1kV(Um=1.2 kV)到35kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第3部分:额定电压35kV(Um=40.5kV)电缆 |
China National Standards with |
English PDF |
GB/T 12706.2-2020 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) 额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第2部分:额定电压6 kV(Um=7.2kV)到30 kV(Um=36 kV)电缆 |
China National Standards with |
English PDF |
GB/T 12706.1-2020 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 1: Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV) 额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第1部分:额定电压1 kV(Um=1.2 kV)和3 kV(Um=3.6 kV)电缆 |
China National Standards with |
English PDF |
GB/T 10068-2020 |
Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards with |
English PDF |
GB/T 4698.10-2020 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 10:Determination of chromium content—Ammonium ferrous sulfate titration and inductively coupled plasma atomic emission spectrometry(with vanadium) 海绵钛、钛及钛合金化学分析方法 第10部分:铬量的测定 硫酸亚铁铵滴定法和电感耦合等离子体原子发射光谱法(含钒) |
China National Standards with |
English PDF |
GB/T 38510-2020 |
Evaluation of self-sealing performance for tyres coated with self-sealing material 涂覆式刺扎自密封轮胎自密封性能评价 |
China National Standards with |
English PDF |
GB/T 38404-2020 |
Hot filling-capping machine for fruit and vegetable juice (with pulps)—General technical specification 果蔬汁(含颗粒)饮料热灌装封盖机 通用技术规范 |
China JB-Machinery Industry Standards with |
English PDF |
GB/T 45001-2020 |
Occupational health and safety management systems—Requirements with guidance for use 职业健康安全管理体系 要求及使用指南 |
China National Standards with |
English PDF |
GB/T 39659-2020 |
Rarely-used Chinese character encoding with structure for numeric key 生僻汉字结构数字键编码 |
China National Standards with |
English PDF |
GB/T 39640-2020 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure 家用电器及类似器具电磁场相对于人体曝露的测量方法 |
China National Standards with |
English PDF |
GB/T 39576-2020 |
Test methods for security capability of mobile terminal with syncretic function 具有融合功能的移动终端安全能力测试方法 |
China National Standards with |
English PDF |
GB/T 39575-2020 |
Technical requirements for security capability of mobile terminal with syncretic function 具有融合功能的移动终端安全能力技术要求 |
China National Standards with |
English PDF |
GB/T 20996.3-2020 |
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3: Dynamic conditions 采用电网换相换流器的高压直流系统的性能 第3部分:动态 |
China National Standards with |
English PDF |
GB/T 20996.2-2020 |
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 2: Faults and switching 采用电网换相换流器的高压直流系统的性能 第2部分:故障和操作 |
China National Standards with |
English PDF |
GB/T 20996.1-2020 |
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 1: Steady-state conditions 采用电网换相换流器的高压直流系统的性能 第1部分:稳态 |
China National Standards with |
English PDF |
GB/T 19212.11-2020 |
Safety of transformers, reactors, power supply units and combinations thereof—Part 11: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V 变压器、电抗器、电源装置及其组合的安全 第11部分:高绝缘水平分离变压器和输出电压超过1 000 V的分离变压器的特殊要求和试验 |
China National Standards with |
English PDF |
GB/T 11032-2020 |
Metal-oxide surge arresters without gaps for a.c. systems 交流无间隙金属氧化物避雷器 |
China National Standards with |
English PDF |
GB/T 39695-2020 |
Identification of volatile components of rubber fumes—Thermodesorption and gas chromatographic method with mass spectrometric detection 橡胶烟气中挥发性成分的鉴定 热脱附-气相色谱-质谱法 |
China National Standards with |
English PDF |
GB/T 39545.3-2020 |
Design and selection of components for enclosed gear drives—Part 3: Shaft-to-hub juncture with keyless fits 闭式齿轮传动装置的零部件设计和选择 第3部分:轴和轮毂的无键配合连接 |
China National Standards with |
English PDF |
GB/T 39658-2020 |
Specifications of public library service for persons with dyslexia 公共图书馆读写障碍人士服务规范 |
China National Standards with |
English PDF |
GB/T 39604-2020 |
Social responsibility management systems—Requirements with guidance for use 社会责任管理体系 要求及使用指南 |
China National Standards with |
English PDF |
GB/T 5801-2020 |
Rolling bearings—Needle roller bearings with machined rings—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 机制套圈滚针轴承 外形尺寸、产品几何技术规范(GPS)和公差值 |
China National Standards with |
English PDF |
GB/T 39337-2020 |
Technical requirement of fully mechanized bag filling mining with superhigh-water material 综合机械化超高水材料袋式充填采煤技术要求 |
China National Standards with |
English PDF |
GB/T 39336-2020 |
Technical requirement of roadside bag filling for gob-side entry retaining with high-water material 沿空留巷高水材料巷旁袋式充填技术要求 |
China National Standards with |
English PDF |
GB/T 39271.2-2020 |
Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 2:Static load ratings 滚动轴承 陶瓷滚动体混合轴承的额定载荷 第2部分:额定静载荷 |
China National Standards with |
English PDF |
GB/T 39271.1-2020 |
Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 1: Dynamic load ratings 滚动轴承 陶瓷滚动体混合轴承的额定载荷 第1部分:额定动载荷 |
China National Standards with |
English PDF |
GB/T 39245.2-2020 |
Grooved metal gaskets with covering layers for pipe flanges—Part 2:Class designated 管法兰用金属齿形组合垫片 第2部分:Class 系列 |
China National Standards with |
English PDF |
GB/T 39245.1-2020 |
Grooved metal gaskets with covering layers for pipe flanges—Part 1:PN designated 管法兰用金属齿形组合垫片 第1部分:PN 系列 |
China National Standards with |
English PDF |
GB/T 27424-2020 |
Conformity assessment—Specification for biological quality control materials without metrological traceability 合格评定 非可溯源生物质控品质量控制规范 |
China National Standards with |
English PDF |
GB/T 23331-2020 |
Energy management systems—Requirements with guidance for use 能源管理体系 要求及使用指南 |
China National Standards with |
English PDF |
GB/T 32.3-2020 |
Hexagon bolts with wire holes on head—Fine pitch thread 六角头头部带孔螺栓 细牙 |
China National Standards with |
English PDF |
GB/T 32.1-2020 |
Hexagon bolts with wire holes on head 六角头头部带孔螺栓 |
China National Standards with |
English PDF |
GB/T 39422-2020 |
Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards with |
English PDF |
GB/T 20323-2020 |
Milling cutters designation —Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards with |
English PDF |
GB/T 39288-2020 |
Thermal storage device with electrical input and thermal output 蓄热型电加热装置 |
China National Standards with |
English PDF |
GB/T 39246-2020 |
Prefabricated directly buried insulating fittings with seamless high density polyethylene casing pipe 高密度聚乙烯无缝外护管预制直埋保温管件 |
China National Standards with |
English PDF |
GB/T 38347-2019 |
Hot-rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards with |
English PDF |
GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards with |
English PDF |
GB/T 23711.8-2019 |
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分:耐高电阻试验 |
China National Standards with |
English PDF |
GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分:泄漏试验 |
China National Standards with |
English PDF |
GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分:耐压试验 |
China National Standards with |
English PDF |
GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分:冷热循环检验 |
China National Standards with |
English PDF |
GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分:耐负压检验 |
China National Standards with |
English PDF |
GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分:耐高温检验 |
China National Standards with |
English PDF |
GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分:耐低温试验 |
China National Standards with |
English PDF |
GB/T 23711.1-2019 |
Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分:电火花试验 |
China National Standards with |
English PDF |
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards with |
English PDF |
GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分:循环温度下试验 |
China National Standards with |
English PDF |
GB/T 38425.2-2019 |
Textile machinery and accessories—Flat steel healds with closed end loops—Part 2:Dimensions of healds manufactured of hardened strip steel 纺织机械与附件 闭口综耳钢片综 第2部分:淬火钢带钢片综的尺寸 |
China National Standards with |
English PDF |
GB/T 38364.3-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 3: Ride-on lawnmowers with seated operator 园林机械 以内燃机为动力的草坪修剪机安全要求 第3部分:坐骑式草坪修剪机 |
China National Standards with |
English PDF |
GB/T 38350-2019 |
Residential gas-fired heating and hot water appliances with auxiliary energy 带辅助能源的住宅燃气采暖热水器具 |
China National Standards with |
English PDF |
GB/T 38347-2019 |
Hot-rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards with |
English PDF |
GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards with |
English PDF |
GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分:泄漏试验 |
China National Standards with |
English PDF |
GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分:耐压试验 |
China National Standards with |
English PDF |
GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分:冷热循环检验 |
China National Standards with |
English PDF |
GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分:耐负压检验 |
China National Standards with |
English PDF |
GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分:耐高温检验 |
China National Standards with |
English PDF |
GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分:耐低温试验 |
China National Standards with |
English PDF |
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards with |
English PDF |
GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分:循环温度下试验 |
China National Standards with |
English PDF |
GB/T 51353-2019 |
Standard for withdrawal of housing provident fund 住房公积金提取业务标准 |
China National Standards with |
English PDF |
GB/T 37895-2019 |
Dimensions of accessories for cutter arbors with parallel key and tenon drive 带平键和端键传动铣刀杆附件的尺寸 |
China National Standards with |
English PDF |
GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system 带平键和端键传动的铣刀杆 第6部分:带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记 |
China National Standards with |
English PDF |
GB/T 37891.5-2019 |
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface 带平键和端键传动的铣刀杆 第5部分:带法兰接触面的多棱锥柄刀杆的尺寸和标记 |
China National Standards with |
English PDF |
GB/T 37891.4-2019 |
Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers 带平键和端键传动的铣刀杆 第4部分:带7:24手动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards with |
English PDF |
GB/T 37891.3-2019 |
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers 带平键和端键传动的铣刀杆 第3部分:带7:24自动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards with |
English PDF |
GB/T 37891.2-2019 |
Cutter arbors with parallel key and tenon drive—Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface 带平键和端键传动的铣刀杆 第2部分:带法兰接触面的空心圆锥柄刀杆的尺寸和标记 |
China National Standards with |
English PDF |
GB/T 37891.1-2019 |
Cutter arbors with parallel key and tenon drive—Part 1: General dimensions 带平键和端键传动的铣刀杆 第1部分:通用尺寸 |
China National Standards with |
English PDF |
GB/T 37852-2019 |
Class containers—Height and non-parallelism of finish with reference to container base—Test methods 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法 |
China National Standards with |
English PDF |
GB/T 2078-2019 |
Dimensions of indexable hardmetal (carbide) inserts with rounded corners,with cylindrical fixing hole 带圆角圆孔固定的硬质合金可转位刀片尺寸 |
China National Standards with |
English PDF |
GB/T 38437-2019 |
Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method 用抽拉或旋转方式测量铁磁材料样品磁偶极矩的方法 |
China National Standards with |
English PDF |
GB/T 37591-2019 |
Cold-rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher 700MW及以上级大电机用冷轧无取向电工钢带 |
China National Standards with |
English PDF |
GB/T 37589-2019 |
Technical specification for anticorrosion of steel pipe and fitting lining with fluoroplastics 钢制管道及管件内衬氟塑料耐蚀作业技术规范 |
China National Standards with |
English PDF |
GB/T 20564.12-2019 |
Continuously cold rolled high strength steel sheet and strip for automobile—Part 12:Dual phase steel with high formability 汽车用高强度冷连轧钢板及钢带 第12部分:增强成形性双相钢 |
China National Standards with |
English PDF |
GB/T 13893.2-2019 |
Paints and varnishes—Determination of resistance to humidity—Part 2: Condensation(in-cabinet exposure with heated water reservoir) 色漆和清漆 耐湿性的测定 第2部分:冷凝(在带有加热水槽的试验箱内曝露) |
China National Standards with |
English PDF |
GB/T 37760-2019 |
Determination of perfluorooctanoic acid and perfluorooctane sulfonic acid in electronic and electrical products—Ultra high performance liquid chromatographic method with tandem mass spectrometry 电子电气产品中全氟辛酸和全氟辛烷磺酸的测定 超高效液相色谱串联质谱法 |
China National Standards with |
English PDF |
GB/T 37751.33-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with alu 家用和类似用途的剩余电流动作断路器 第3-3部分:具有连接外部未经处理铝导线的螺纹型接线端子和连接铜或铝导线的铝制螺纹型接线端子RCD的特殊要求 |
China National Standards with |
English PDF |
GB/T 37751.32-2019 |
:Residual current operated circuit-breakers for household and similar use—Part 3-2: Particular requirements for RCDs with flat quick-connect terminations 家用和类似用途的剩余电流动作断路器 第3-2部分:带扁平快速连接端头的RCD的特殊要求 |
China National Standards with |
English PDF |
GB/T 37751.31-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-1:Particular requirements for RCDs with screwless-type terminals for external copper conductors 家用和类似用途的剩余电流动作断路器 第3-1部分:具有连接外部铜导线的无螺纹型接线端子的RCD的特殊要求 |
China National Standards with |
English PDF |
GB/T 37707-2019 |
Thermal spraying—Components with thermally sprayed coatings—Technical supply conditions 热喷涂 热喷涂零件 技术供应条件 |
China National Standards with |
English PDF |
GB/T 37679-2019 |
Sheet metal parts fabricated by fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards with |
English PDF |
GB/T 37630-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acetate or triacetate with certain other fibres(method using hydrochloric acid) 纺织品 定量化学分析 醋酯纤维或三醋酯纤维与某些其他纤维的混合物(盐酸法) |
China National Standards with |
English PDF |
GB/T 37629-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acrylic with certain other fibres(method using formic acid and zinc chloride) 纺织品 定量化学分析 聚丙烯腈纤维与某些其他纤维的混合物(甲酸/氯化锌法) |
China National Standards with |
English PDF |
GB/T 17889.6-2019 |
Ladders—Part 6: Mobile ladders with platform 梯子 第6部分:可移动式平台梯 |
China National Standards with |
English PDF |
GB/T 14048.14-2019 |
Low-voltage switchgear and controlgear—Part 5-5: Control circuit devices and switching elements—Electrical emergency stop device with mechanical latching function 低压开关设备和控制设备 第5-5部分:控制电路电器和开关元件 具有机械锁闩功能的电气紧急制动装置 |
China National Standards with |
English PDF |
GB/T 37506-2019 |
Code of practice for Myzus persicae(Sulzer) biological control with Aphidius gifuensis(Ashmead) 烟蚜茧蜂防治烟蚜技术规程 |
China National Standards with |
English PDF |
GB/T 37513-2019 |
Grain and oil machinery—Bucket elevator with low broken ratio 粮油机械 低破碎斗式提升机 |
China National Standards with |
English PDF |
GB/T 37512-2019 |
Inspection of grain and oils—Determination of the difference between actual and theoretical content of triacylglycerols with ECN 42 粮油检验 实际与理论ECN42甘三酯含量差值的测定 |
China National Standards with |
English PDF |
GB/T 37462-2019 |
Locking threads with 30 degree wedge ramp 30°楔形防松螺纹 |
China National Standards with |
English PDF |
GB/T 20897.4-2019 |
Inflatable boats—Part 4:Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater 充气艇 第4部分:发动机额定功率为15 kW及以上且船长在8m~24m之间的艇 |
China National Standards with |
English PDF |
Find out:1746Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |