GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 29928-2013 |
National Food Safety Standard Food ADditive Identification Acid treated starches 食品安全国家标准 食品添加剂 酸处理淀粉 |
China National Standards AD |
English PDF |
GB 29927-2013 |
National Food Safety Standard Food ADditive Identification Oxidized starch 食品安全国家标准 食品添加剂 氧化淀粉 |
China National Standards AD |
English PDF |
GB 29926-2013 |
National Food Safety Standard Food ADditive Identification Distarch phosphate 食品安全国家标准 食品添加剂 磷酸酯双淀粉 |
China National Standards AD |
English PDF |
GB 29942-2013 |
National Food Safety Standard Food ADditive Identification Vitamin E (dl-α-tocopherol) 食品安全国家标准 食品添加剂 维生素E(dl-α-生育酚) |
China National Standards AD |
English PDF |
GB 29949-2013 |
National Food Safety Standard Food ADditive Identification Allyl disulfide Food Additive Identification Arabic gum 食品安全国家标准 食品添加剂 阿拉伯胶 |
China National Standards AD |
English PDF |
GB 29957-2013 |
National Food Safety Standard Food ADditive Identification Allyl disulfide Food Additive Identification Dihydro-β-ionone 食品安全国家标准 食品添加剂 二氢-β-紫罗兰酮 |
China National Standards AD |
English PDF |
GB 29988-2013 |
National Food Safety Standard Food ADditive Identification Potassium alginate (potassium alginic acid) 食品安全国家标准 食品添加剂 海藻酸钾(褐藻酸钾) |
China National Standards AD |
English PDF |
GB/T 30016-2013 |
Bronze alloys plate and strip for overheAD line 接触网用青铜板带 |
China National Standards AD |
English PDF |
GB/T 30015-2013 |
Bronze alloys rod and bar for overheAD line 接触网用青铜棒 |
China National Standards AD |
English PDF |
GB/T 30014-2013 |
Methods for chemical analysis of spent pallADium-carbon - Determination of palladium - Inductively coupled plasma atomic emission spectrometry 废钯炭催化剂化学分析方法 钯量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards AD |
English PDF |
GB/T 29998-2013 |
Benefit calculation to determine the mining and processing of low-grADe ore of copper mine 铜矿山低品位矿石可采选效益计算方法 |
China National Standards AD |
English PDF |
GB/T 11064.16-2013 |
Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 16: Determination of calcium,magnesium,copper,leAD,zinc,nickel,manganese,cadmium and aluminum content - Inductively coupled plasma atomic emission 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第16部分:钙、镁、铜、铅、锌、镍、锰、镉、铝量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards AD |
English PDF |
GB/T 30038-2013 |
RoAD vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access 道路车辆 电气电子设备防护等级(IP代码) |
China National Standards AD |
English PDF |
GB/T 30036-2013 |
ADaptive front-lighting system for motor vehicles 汽车用自适应前照明系统 |
China National Standards AD |
English PDF |
GB/T 30027-2013 |
Short link chains for lifting purposes - GrADe VH,fine tolerance for manually operated chain hoists 起重用短环链 VH级手动链式葫芦用高精度链 |
China National Standards AD |
English PDF |
GB/T 30026-2013 |
Short link chains for lifting purposes - GrADe TH,fine tolerance for manually operated chain hoists 起重用短环链 TH级手动链式葫芦用高精度链 |
China National Standards AD |
English PDF |
GB/T 26949.3-2013 |
Industrial trucks - Verification of stability - Part 3: Reach and strADdle trucks 工业车辆 稳定性验证 第3部分: 前移式和插腿式叉车 |
China National Standards AD |
English PDF |
GB/T 12668.502-2013 |
ADjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional 调速电气传动系统 第5-2部分:安全要求 功能 |
China National Standards AD |
English PDF |
GB 12668.501-2013 |
ADjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy 调速电气传动系统 第5-1部分:安全要求 电气、热和能量 |
China National Standards AD |
English PDF |
GB 6364-2013 |
Electromagnetic environment requirements for aeronautical rADio navigation stations 航空无线电导航台(站)电磁环境要求 |
China National Standards AD |
English PDF |
GB/T 9397-2013 |
General specification for electrodynamic loudspeaker of direct rADiator type 直接辐射式电动扬声器通用规范 |
China National Standards AD |
English PDF |
GB/T 4389-2013 |
Double-heADed open-ended wrenches,double-headed box wrenches and combination wrenches - Maximum widths of heads 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸 |
China National Standards AD |
English PDF |
GB/T 6839-2013 |
Testing method for lubrication of sewing threADs 缝纫线润滑性试验方法 |
China National Standards AD |
English PDF |
GB/T 29875-2013 |
Determination of leAD,arsenic,mercury in phosphate rock and concentrate 磷矿石和磷精矿中铅、砷、汞含量的测定 |
China National Standards AD |
English PDF |
GB/T 29843-2013 |
General specification for DC electronic loAD 直流电子负载通用规范 |
China National Standards AD |
English PDF |
GB/T 29807-2013 |
Information technology - Learning,education and training - XML binding specification for learning object metAData 信息技术 学习、教育和培训 学习对象元数据XML绑定规范 |
China National Standards AD |
English PDF |
GB/T 29797-2013 |
Specification of the 13.56MHz rADio frequency identification reader/writer equipment 13.56MHz射频识别读/写设备规范 |
China National Standards AD |
English PDF |
GB/T 29844-2013 |
Specifications of metrology patterns for the evaluation of ADvanced photolithgraphy 用于先进集成电路光刻工艺综合评估的图形规范 |
China National Standards AD |
English PDF |
GB/T 29857-2013 |
Ships and marine technology - Computer applications - Shipboard loADing instruments 船舶和海上技术 计算机应用 船用装载仪 |
China National Standards AD |
English PDF |
GB/T 28046.5-2013 |
RoAD vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads 道路车辆 电气及电子设备的环境条件和试验 第5部分:化学负荷 |
China National Standards AD |
English PDF |
GB/T 11313.1-2013 |
RADio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods 射频连接器 第1部分:总规范 一般要求和试验方法 |
China National Standards AD |
English PDF |
GB/T 29897-2013 |
Visual grADing rules for dimension lumber in light wood frame construction 轻型木结构用规格材目测分级规则 |
China National Standards AD |
English PDF |
GB/T 29885-2013 |
Cotton seed quality grADe 棉籽质量等级 |
China National Standards AD |
English PDF |
GB/T 29618.309-2013 |
Field device tool(FDT) interface specification - Part 309: Communication profile integration - Highway ADdressable remote transducer 现场设备工具(FDT)接口规范 第309部分:通信行规集成 可寻址远程传感器高速通道 |
China National Standards AD |
English PDF |
GB/T 29840-2013 |
VanADium flow battery - Terminology 全钒液流电池 术语 |
China National Standards AD |
English PDF |
GB/T 2423.24-2013 |
Environmental testing - Part 2: Test methods - Test Sa: Simulated solar rADiation at ground level and guidance for solar radiation testing 环境试验 第2部分:试验方法 试验Sa:模拟地面上的太阳辐射及其试验导则 |
China National Standards AD |
English PDF |
GB/T 50948-2013 |
Technical code for architectural acoustics of stADium 体育场建筑声学技术规范 |
China National Standards AD |
English PDF |
GB/T 19277.2-2013 |
Determination of the ultimate aerobic biodegrADability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量 |
China National Standards AD |
English PDF |
GB 30004-2013 |
The safety requirements of crADles 婴儿摇篮的安全要求 |
China National Standards AD |
English PDF |
GB/T 4893.4-2013 |
Test of surface coatings of furniture - Part 4:Determination of ADhesion - Cross cut 家具表面漆膜理化性能试验 第4部分:附着力交叉切割测定法 |
China National Standards AD |
English PDF |
GB/T 30001.5-2013 |
Information technology - RF-based mobile payment - Part 5: Test methods of rADio frequency interface 信息技术 基于射频的移动支付 第5部分:射频接口测试方法 |
China National Standards AD |
English PDF |
GB/T 30001.4-2013 |
Information technology - Mobile payment based on rADio frequency - Part 4: Card application management and security 信息技术 基于射频的移动支付 第4部分: 卡应用管理和安全 |
China National Standards AD |
English PDF |
GB/T 30001.3-2013 |
Information technology - Mobile payment based on rADio frequency - Part 3: Device technical requirements 信息技术 基于射频的移动支付 第3部分: 设备技术要求 |
China National Standards AD |
English PDF |
GB/T 30001.2-2013 |
Information technology - Mobile payment based on rADio frequency - Part 2: Card technical requirements 信息技术 基于射频的移动支付 第2部分:卡技术要求 |
China National Standards AD |
English PDF |
GB/T 30001.1-2013 |
Information technology - Mobile payment based on rADio frequency - Part 1: Radio-frequency interface 信息技术 基于射频的移动支付 第1部分:射频接口 |
China National Standards AD |
English PDF |
GB/T 29794-2013 |
Cleaning blADe for electrostatic copying(printing)device 静电复印(打印)设备用刮板 |
China National Standards AD |
English PDF |
GB/T 4835.2-2013 |
RADiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection 辐射防护仪器 β、X和γ辐射周围和/或定向剂量当量(率)仪和/或监测仪 第2部分:应急辐射防护用便携式高量程β和光子剂量与剂量率仪 |
China National Standards AD |
English PDF |
GB/T 29789-2013 |
RADiation protection instrumentation - Equipment for sampling and monitoring radioactive noble gases 辐射防护仪器 放射性惰性气体取样和监测设备 |
China National Standards AD |
English PDF |
GB/T 29788-2013 |
RADiation protection instrumentation - Portable photon contamination meters and monitors 辐射防护仪器 便携式表面污染光子测量仪和监测仪 |
China National Standards AD |
English PDF |
GB/T 29787-2013 |
RADiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment 辐射防护仪器 测量环境中光子和中子辐射的移动式仪器 |
China National Standards AD |
English PDF |
GB/T 14054-2013 |
RADiation protection instrumentation - Installed dose rate meters,warning assemblies and monitors for X and gamma radiation of energy between 50 keVand 7 MeV 辐射防护仪器 能量在50 keV~7 MeV的X和γ辐射固定式剂量率仪、报警装置和监测仪 |
China National Standards AD |
English PDF |
GB/T 12164.3-2013 |
Reference beta rADiations - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence β参考辐射 第3部分:场所和个人剂量仪的校准及其能量响应和角响应的确定 |
China National Standards AD |
English PDF |
GB 29753-2013 |
RoAD transportation - Perishable food and biological product of refrigerated van - Security requirement and test methods 道路运输 食品与生物制品冷藏车 安全要求及试验方法 |
China National Standards AD |
English PDF |
GB/T 7218-2013 |
Rolling bearings - Miniature rADial ball bearings with flanged outer ring - Boundary dimensions 滚动轴承 凸缘外圈微型向心球轴承 外形尺寸 |
China National Standards AD |
English PDF |
GB/T 7217-2013 |
Rolling bearings - RADial ball bearings with flanged outer ring - Flange dimensions 滚动轴承 凸缘外圈向心球轴承 凸缘尺寸 |
China National Standards AD |
English PDF |
GB/T 29738-2013 |
GrADuations and test method for performance of exterior windows and doors, curtain walls impacted by windborne debris in windstorm 建筑幕墙和门窗抗风携碎物冲击性能分级及检测方法 |
China National Standards AD |
English PDF |
GB/T 29737-2013 |
GrADuations and test method of sand and dust resistance performance for building external windows and doors 建筑门窗防沙尘性能分级及检测方法 |
China National Standards AD |
English PDF |
GB/T 29715-2013 |
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viADucts 机械振动与冲击 桥和高架桥动态试验和检测指南 |
China National Standards AD |
English PDF |
GB/T 29768-2013 |
Information technology - RADio frequency identification - Air interface protocol at 800/900 MHz 信息技术 射频识别 800/900MHz空中接口协议 |
China National Standards AD |
English PDF |
GB/T 29751-2013 |
Requirement for ADoption and installation of piping compensatory couplings 管路补偿接头选用和安装要求 |
China National Standards AD |
English PDF |
GB/T 29744-2013 |
RoAD traffic information service - Coding rules for road 道路交通信息服务 道路编码规则 |
China National Standards AD |
English PDF |
GB/T 29728-2013 |
Energy consumption grADes of furnace for CGL 热浸镀锌钢带生产线加热炉能耗分级 |
China National Standards AD |
English PDF |
GB/T 29727-2013 |
Energy consumption grADes of incinerator and curing furnace for CCL 彩色涂层钢带生产线焚烧炉和固化炉能耗分级 |
China National Standards AD |
English PDF |
GB/T 29723.4-2013 |
GrADe and limit of major process energy consumption for coal mine - Part 4: Main elevating belt conveyor system 煤矿主要工序能耗等级和限值 第4部分:主提升带式输送系统 |
China National Standards AD |
English PDF |
GB/T 29723.3-2013 |
GrADe and limit of major process energy consumption for coal mine - Part 3: Air compressor system 煤矿主要工序能耗等级和限值 第3部分:空气压缩系统 |
China National Standards AD |
English PDF |
GB/T 29723.2-2013 |
GrADe and limit of major process energy consumption for coal mine - Part 2:Main drainage system 煤矿主要工序能耗等级和限值 第2部分:主排水系统 |
China National Standards AD |
English PDF |
GB/T 29723.1-2013 |
GrADe and limit of major process energy consumption for coal mine - Part 1: Primary fan system 煤矿主要工序能耗等级和限值 第1部分:主要通风系统 |
China National Standards AD |
English PDF |
GB 29698-2013 |
National Food Safety Standard-Determination of 17β-estrADiol, estriol and ethinylestradiol residues in milk and milk products by gas chromatography-mass spectrometry 食品安全国家标准 奶及奶制品中17β-雌二醇、雌三醇、炔雌醇多残留的测定 气相色谱-质谱法 |
China National Standards AD |
English PDF |
GB/T 29646-2013 |
Modified biodegrADable polyester used for blown film 吹塑薄膜用改性聚酯类生物降解塑料 |
China National Standards AD |
English PDF |
GB/T 2387-2013 |
Reactive dyes - Determination of shADe and relative strength 反应染料 色光和强度的测定 |
China National Standards AD |
English PDF |
GB/T 2377-2013 |
Vat dyes - Determination of shADe and relative strength 还原染料 色光和强度的测定 |
China National Standards AD |
English PDF |
GB/T 2376-2013 |
Sulphur dyes - Determination of dyeing shADe and relative strength 硫化染料 染色色光和强度的测定 |
China National Standards AD |
English PDF |
GB 50119-2013 |
Code for concrete ADmixture application 混凝土外加剂应用技术规范 |
China National Standards AD |
English PDF |
GB/T 29603-2013 |
Full aperture easy open end mADe of tinplate or ECCS 镀锡或镀铬薄钢板全开式易开盖 |
China National Standards AD |
English PDF |
GB/T 29562.1-2013 |
Energy efficiency test procedures of motors for crane - Part 1: YZP series of variable-frequency ADjustable-speed 3-phase asynchronous motors 起重机械用电动机能效测试方法 第1部分:YZP系列变频调速三相异步电动机 |
China National Standards AD |
English PDF |
GB/T 29584-2013 |
Detection and identification of ClADosporium cucumerinum Ell. et Arthur 黄瓜黑星病菌检疫鉴定方法 |
China National Standards AD |
English PDF |
GB/T 7404.2-2013 |
LeAD-acid battery for locomotives and rolling stock - Part 2:Valve regulated lead-acid for diesel locomotives 轨道交通车辆用铅酸蓄电池 第2部分:内燃机车用阀控式铅酸蓄电池 |
China National Standards AD |
English PDF |
GB/T 7404.1-2013 |
LeAD-acid battery for locomotives and rolling stock - Part 1: Valve-regulate lead acid for electric and subway locomotives 轨道交通车辆用铅酸蓄电池 第1部分:电力机车、地铁车辆用阀控式铅酸蓄电池 |
China National Standards AD |
English PDF |
GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grADes and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分:与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards AD |
English PDF |
GB/T 29612-2013 |
Carbon black - Determination of cADmium, lead, mercury content 炭黑中镉、铅、汞含量的测定 |
China National Standards AD |
English PDF |
GB/T 29607-2013 |
Rubber product - Determination of cADmium content - Atomic absorption spectrometry 橡胶制品 镉含量的测定 原子吸收光谱法 |
China National Standards AD |
English PDF |
GB/T 29596-2013 |
Classification of pressure sensitive ADhesive products 压敏胶粘制品分类 |
China National Standards AD |
English PDF |
GB/T 29593-2013 |
Kraft paper ADhesive tape for surface protection 表面保护用牛皮纸胶粘带 |
China National Standards AD |
English PDF |
GB/T 29592-2013 |
Determination of the emission of volatile organic compounds and aldehydes of ADhesives for building products 建筑胶粘剂挥发性有机化合物(VOC)及醛类化合物释放量的测定方法 |
China National Standards AD |
English PDF |
GB/T 2794-2013 |
Determination for viscosity of ADhesives - Single cylinder rotational viscometer method 胶粘剂粘度的测定 单圆筒旋转粘度计法 |
China National Standards AD |
English PDF |
GB/T 2394-2013 |
Disperse dyestuff - Determination of shADe and relative strength 分散染料 色光和强度的测定 |
China National Standards AD |
English PDF |
GB/T 2380-2013 |
Mordant dyes - Determination of dyeing shADe and relative strength 媒介染料 染色色光和强度的测定 |
China National Standards AD |
English PDF |
GB/T 2375-2013 |
Direct dyes - Determination of dyeing shADe and relative strength 直接染料 染色色光和强度的测定 |
China National Standards AD |
English PDF |
GB/T 29624-2013 |
Layout key of consignment for the international trADe 国际贸易托运单样式 |
China National Standards AD |
English PDF |
GB/T 29623-2013 |
TrADe and transport status codes 贸易与运输状态代码 |
China National Standards AD |
English PDF |
GB/T 6759-2013 |
Conveyor belts - ADhesion between constitutive elements - Test methods 输送带 层间粘合强度 试验方法 |
China National Standards AD |
English PDF |
GB/T 35-2013 |
Square heAD bolts with small head 小方头螺栓 |
China National Standards AD |
English PDF |
GB/T 29537-2013 |
Pipe threADs with 80 degree thread angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards AD |
English PDF |
GB/T 29525-2013 |
Chair height ADjustment gas spring - Technical specification 座椅升降气弹簧 技术条件 |
China National Standards AD |
English PDF |
GB/T 29.2-2013 |
Hexagon bolts with cross recess on heAD 六角头带十字槽螺栓 |
China National Standards AD |
English PDF |
GB/T 29.1-2013 |
Hexagon bolts with slot on heAD 六角头带槽螺栓 |
China National Standards AD |
English PDF |
GB/T 17044-2013 |
Steel cord conveyor belts - ADhension strength test of the cover to the core layer 钢丝绳芯输送带 覆盖层与带芯层粘合强度试验 |
China National Standards AD |
English PDF |
GB/T 15-2013 |
Mushroom heAD nib bolts 扁圆头带榫螺栓 |
China National Standards AD |
English PDF |
GB/T 14-2013 |
Mushroom heAD square neck bolts 扁圆头方颈螺栓 |
China National Standards AD |
English PDF |
GB/T 1414-2013 |
General purpose metric screw threADs - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards AD |
English PDF |
Find out:6606Items | To Page of: First -Previous-Next -Last | [27] [28] [29] [30] [31] [32] [33] |