GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 21966-2008 |
SAFety of primary and secondary lithium cells and batteries during transport 锂原电池和蓄电池在运输中的安全要求 |
China National Standards AF |
English PDF |
GB 16844-2008 |
Self-ballasted lamps for general lighting services - SAFety requirements 普通照明用自镇流灯的安全要求 |
China National Standards AF |
English PDF |
GB 16843-2008 |
Single-capped fluorescent lamps - SAFety specifications 单端荧光灯的安全要求 |
China National Standards AF |
English PDF |
GB 14196.3-2008 |
Incandescent lamps - SAFety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) 白炽灯 安全要求 第3部分:卤钨灯(非机动车辆用) |
China National Standards AF |
English PDF |
GB/T 21964-2008 |
Repair of agricultural machines - SAFety regulations 农业机械修理 安全规范 |
China National Standards AF |
English PDF |
GB/T 21957-2008 |
The fatigue-life testing method of the axle shAFt and drive shaft on the test stand,wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards AF |
English PDF |
GB/T 15371-2008 |
Torsional vibration of crankshAFt system - Measurement and evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards AF |
English PDF |
GB/T 21932-2008 |
Nickel and ferronickel - Determination of sulphur content - Barium sulfate gravimctric method AFter alumina chromatographic separation 镍和镍铁 硫含量的测定 氧化铝色层分离-硫酸钡重量法 |
China National Standards AF |
English PDF |
GB/T 21931.2-2008 |
Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infrared absorption method AFter induction furnace combustion 镍、镍铁和镍合金 硫含量的测定 高频燃烧红外吸收法 |
China National Standards AF |
English PDF |
GB/T 21931.1-2008 |
Nickel,ferronickel and nickel alloys - Determination of carbon content - Infrared absorption method AFter induction furnace combustion 镍、镍铁和镍合金 碳含量的测定 高频燃烧红外吸收法 |
China National Standards AF |
English PDF |
GB/T 16499-2008 |
The Preparation of sAFety publication and the use of basic safety publications and group safety publications 安全出版物的编写及基础安全出版物和多专业共用安全出版物的应用导则 |
China National Standards AF |
English PDF |
GB/T 21920-2008 |
SAFety code for the quayside container crane 岸边集装箱起重机安全规程 |
China National Standards AF |
English PDF |
GB/T 18224-2008 |
SAFety code for the bridge type grab ship unloader 桥式抓斗卸船机安全规程 |
China National Standards AF |
English PDF |
GB/T 17992-2008 |
SAFety code for the container reach stacker 集装箱正面吊运起重机安全规程 |
China National Standards AF |
English PDF |
GB/T 14734-2008 |
SAFety code for port floating crane 港口浮式起重机安全规程 |
China National Standards AF |
English PDF |
GB/T 13561.2-2008 |
SAFety code on port’s continuous handling facilities - Part 2:Pneumatic shipunloader 港口连续装卸设备安全规程 第2部分:气力卸船机 |
China National Standards AF |
English PDF |
GB/T 13813-2008 |
Testing method and judging rule of sAFety to friction spark of metallic material for coal mine 煤矿用金属材料摩擦火花安全性试验方法和判定规则 |
China National Standards AF |
English PDF |
GB 7260.4-2008 |
Uninterruptible Power Systems(UPS) - Part 1-2: General and sAFety requirements for UPS used in restricted access locations 不间断电源设备 第1-2部分:限制触及区使用的UPS的一般规定和安全要求 |
China National Standards AF |
English PDF |
GB 7260.1-2008 |
Uninterruptible power systems(UPS) - Part 1-1: General and sAFety requirements for UPS used in operator access areas 不间断电源设备 第1-1部分: 操作人员触及区使用的UPS的一般规定和安全要求 |
China National Standards AF |
English PDF |
GB 5959.13-2008 |
SAFety in electroheat installations - Part 13: particular requirements for electroheat installation with explosive atmosphere 电热装置的安全 第13部分: 对具有爆炸性气氛的电热装置的特殊要求 |
China National Standards AF |
English PDF |
GB/T 9741-2008 |
Chemical reagent - General method for the determination of residue AFter ignition 化学试剂 灼烧残渣测定通用方法 |
China National Standards AF |
English PDF |
GB/T 9740-2008 |
Chemical reagent - General method for the determination of dry residue AFter evaporation 化学试剂 蒸发残渣测定通用方法 |
China National Standards AF |
English PDF |
GB/T 21283.5-2008 |
Rotary shAFt lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈 第5部分 外观缺陷的识别 |
China National Standards AF |
English PDF |
GB/T 21283.4-2008 |
Rotary shAFt lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards AF |
English PDF |
GB/T 21283.3-2008 |
Rotary shAFt lip-type seals incorporating thermoplastic sealing elements - Part 3 :Storage,handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards AF |
English PDF |
GB/T 13871.3-2008 |
Rotary shAFt lip-type seals incorporating elastomeric sealing elements - Part 3: Storage,handling and installation 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards AF |
English PDF |
GB/T 5686.1-2008 |
Ferromanganese,ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal - Determination of manganese content - Potentiometric method and titrimetric mothod AFter ammonium nitrate & perchloric acid oxidation 锰铁、锰硅合金、氮化锰铁和金属锰 锰含量的测定 电位滴定法、硝酸铵氧化滴定法及高氯酸氧化滴定法 |
China National Standards AF |
English PDF |
GB/T 223.69-2008 |
Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method AFter combustion in the pipe furnace 钢铁及合金 碳含量的测定 管式炉内燃烧后气体容量法 |
China National Standards AF |
English PDF |
GB/T 21849-2008 |
Chemical products for industrial use - Determination of inflammation of gases formed AFter hydrolysis of solids and liquids 工业用化学品 固体和液体水解产生的气体可燃性的确定 |
China National Standards AF |
English PDF |
GB/T 21747-2008 |
Educational laboratory equipment - SAFety requirements and test methods for laboratory workbenchs 教学实验室设备 实验台(桌)的安全要求及试验方法 |
China National Standards AF |
English PDF |
GB 21749-2008 |
SAFety requirement for the educational equipment - Vitreous equipment and attachments 教学仪器设备安全要求 玻璃仪器及连接部件 |
China National Standards AF |
English PDF |
GB 21748-2008 |
SAFety requirement for the educational equipment - Basic requirements for equipment and spare parts 教学仪器设备安全要求 仪器和零部件的基本要求 |
China National Standards AF |
English PDF |
GB 21746-2008 |
SAFety requirements for the educational equipment - General principles 教学仪器设备安全要求 总则 |
China National Standards AF |
English PDF |
GB/T 21745-2008 |
Ration of workers for manufacturing rail trAFfic engineering components 轨道交通工程构件制造劳动定员定额 |
China National Standards AF |
English PDF |
GB/T 21744-2008 |
Ration of workers for manufacturing large rail trAFfic engineering equipments 轨道交通工程大型设备制造综合劳动定额 |
China National Standards AF |
English PDF |
GB/Z 21724-2008 |
Code on quality and sAFety control of vegetable for export 出口蔬菜质量安全控制规范 |
China National Standards AF |
English PDF |
GB/Z 21722-2008 |
Code on quality and sAFety control of tea for export 出口茶叶质量安全控制规范 |
China National Standards AF |
English PDF |
GB/T 20002.1-2008 |
DrAFting for special aspects in standards- Part 1: Child safety 标准中特定内容的起草 第1部分:儿童安全 |
China National Standards AF |
English PDF |
GB/T 4776-2008 |
Electrical sAFety terminology 电气安全术语 |
China National Standards AF |
English PDF |
GB/T 13869-2008 |
General guide for sAFety of electric user 用电安全导则 |
China National Standards AF |
English PDF |
GB 16543-2008 |
SAFety regulations for explosion prevention and protection on bituminous coal injection system into blast furnace 高炉喷吹烟煤系统防爆安全规程 |
China National Standards AF |
English PDF |
GB 21660-2008 |
The general requirement for environmental protection, sAFety, identification and marking of plastic shopping bags 塑料购物袋的环保、安全和标识通用技术要求 |
China National Standards AF |
English PDF |
GB 4706.85-2008 |
SAFety of household and similar electrical appliances - Particular requirements for skin exposure to ultraviolet and infrared radiation 家用和类似用途电器的安全 紫外线和红外线辐射皮肤器具的特殊要求 |
China National Standards AF |
English PDF |
GB 4706.27-2008 |
Household and similar electrical appliances-sAFety - Part 2: Particular requirements for fans 家用和类似用途电器的安全 第2部分:风扇的特殊要求 |
China National Standards AF |
English PDF |
GB 4706.15-2008 |
Household and similar electrical appliances-sAFety - Particular requirements for appliances for skin or hair care 家用和类似用途电器的安全 皮肤及毛发护理器具的特殊要求 |
China National Standards AF |
English PDF |
GB/T 21711.1-2008 |
Electromechanical elementary relays - Part 1: General and sAFety requirements 基础机电继电器 第1部分:总则与安全要求 |
China National Standards AF |
English PDF |
GB/T 16992-2008 |
AircrAFt-Identification of servicing,maintenance,ground handling and safety/hazard points 飞机维护及其安全警告标志 |
China National Standards AF |
English PDF |
GB/Z 21702-2008 |
Code on quality and sAFety control of fishery products for export 出口水产品质量安全控制规范 |
China National Standards AF |
English PDF |
GB/Z 21701-2008 |
Code of quality and sAFety control on poultry and poultry products for export 出口禽肉及制品质量安全控制规范 |
China National Standards AF |
English PDF |
GB/Z 21700-2008 |
Code on quality and sAFety control of eel products for export 出口鳗鱼制品质量安全控制规范 |
China National Standards AF |
English PDF |
GB/T 21675-2008 |
Diagnostic techniques for AFrican horse sickness 非洲马瘟诊断技术 |
China National Standards AF |
English PDF |
GB 13851-2008 |
TrAFfic safety signs on inland waterways 内河交通安全标志 |
China National Standards AF |
English PDF |
GB/T 8923.2-2008 |
Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel substrates AFter localized removal of previous coatings 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第2部分: 已涂覆过的钢材表面局部清除原有涂层后的处理等级 |
China National Standards AF |
English PDF |
GB/T 17454.3-2008 |
SAFety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices 机械安全 压敏保护装置 第3部分: 压敏缓冲器、压敏板、压敏线及类似装置的设计和试验通则 |
China National Standards AF |
English PDF |
GB/T 17454.2-2008 |
SAFety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars 机械安全 压敏保护装置 第2部分∶ 压敏边和压敏棒的设计和试验通则 |
China National Standards AF |
English PDF |
GB/T 17454.1-2008 |
SAFety of machinery - Pressure - sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors 机械安全 压敏保护装置 第1部分: 压敏垫和压敏地板的设计和试验通则 |
China National Standards AF |
English PDF |
GB 17888.4-2008 |
SAFety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders 机械安全 进入机械的固定设施 第4部分∶ 固定式直梯 |
China National Standards AF |
English PDF |
GB 17888.3-2008 |
SAFety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails 机械安全 进入机械的固定设施 第3部分:楼梯、阶梯和护栏 |
China National Standards AF |
English PDF |
GB 17888.2-2008 |
SAFety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways 机械安全 进入机械的固定设施 第2部分:工作平台和通道 |
China National Standards AF |
English PDF |
GB 17888.1-2008 |
SAFety of machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels 机械安全 进入机械的固定设施 第1部分:进入两级平面之间的固定设施的选择 |
China National Standards AF |
English PDF |
GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shAFt centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards AF |
English PDF |
GB 21556-2008 |
General sAFety technique requirnent of locks 锁具安全通用技术条件 |
China National Standards AF |
English PDF |
GB 21554-2008 |
Self-ballasted electrodeless fluorescent lamps for general lighting services - SAFety requirements 普通照明用自镇流无极荧光灯 安全要求 |
China National Standards AF |
English PDF |
GB 21549-2008 |
Laboratory glassware - SAFe requirement of heat resisting glassware 实验室玻璃仪器 玻璃烧器的安全要求 |
China National Standards AF |
English PDF |
GB 9706.9-2008 |
Medical electrical equipment - Part 2-37: Particular requirements for the sAFety of ultrasonic medical diagnostic and monitoring equipment 医用电气设备 第2-37部分:超声诊断和监护设备安全专用要求 |
China National Standards AF |
English PDF |
GB 9706.7-2008 |
Medical electrical equipment - Part 2-5: Particular requirements for the sAFety of ultrasonic physiotherapy equipment 医用电气设备 第2-5部分:超声理疗设备安全专用要求 |
China National Standards AF |
English PDF |
GB 5959.6-2008 |
SAFety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment 电热装置的安全 第6部分: 工业微波加热设备的安全规范 |
China National Standards AF |
English PDF |
GB 4793.8-2008 |
SAFety requirements for electrical equipment for measurement,control,and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials,and for laboratory processes 测量、控制和试验室用电气设备的安全要求 第2-042部分:使用有毒气体处理医用材料及供试验室用的压力灭菌器和灭菌器的专用要求 |
China National Standards AF |
English PDF |
GB 3883.16-2008 |
SAFety of hand-held motor-operated electric tools - Part 2: Particular requirements for tackers 手持式电动工具的安全 第二部分: 钉钉机的专用要求 |
China National Standards AF |
English PDF |
GB 19212.20-2008 |
SAFety of power transformers, power supply units and similar - Part 20: Particular requirements for perturbation attenuation transformers 电力变压器、电源装置和类似产品的安全 第20部分:干扰衰减变压器的特殊要求 |
China National Standards AF |
English PDF |
GB/T 21654-2008 |
GrAFcet specification language for sequential function charts 顺序功能表图用GRAFCET规范语言 |
China National Standards AF |
English PDF |
GB/T 21562-2008 |
Railway applications - Specification and demonstration of Reliability,Availability, Maintainability and SAFety (RAMS) 轨道交通 可靠性、可用性、可维修性和安全性规范及示例 |
China National Standards AF |
English PDF |
GB/T 13284.1-2008 |
The sAFety systems for nuclear power plants - Part 1: Design criteria 核电厂安全系统 第1部分:设计准则 |
China National Standards AF |
English PDF |
GB/T 18663.1-2008 |
Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and sAFety aspects for cabinets, racks, subracks and chassis 电子设备机械结构 公制系列和英制系列的试验 第1部分: 机柜、机架、插箱和机箱的气候、机械试验及安全要求 |
China National Standards AF |
English PDF |
GB 21501-2008 |
Cupola and cupola charging machine - SAFety requirements 冲天炉与冲天炉加料机 安全要求 |
China National Standards AF |
English PDF |
GB 21500-2008 |
Trackless tyred mining truck for underground mines - SAFety requirements 地下矿用无轨轮胎式运矿车 安全要求 |
China National Standards AF |
English PDF |
GB/T 11699-2008 |
Small crAFt with inboard engine - Propeller shaft ends and bosses 舷内机小艇 螺旋桨轴端和桨毂 |
China National Standards AF |
English PDF |
GB/T 21487.1-2008 |
Rotating shAFt vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration 转轴振动测量系统 第1部分:径向振动的相对和绝对检测 |
China National Standards AF |
English PDF |
GB/T 21471-2008 |
Machining allowances and tolerances for steel open die forgings on hammer - ShAFts 锤上钢质自由锻件机械加工余量与公差 轴类 |
China National Standards AF |
English PDF |
GB 18447.1-2008 |
SAFety requirements for tractors - Part 1:Wheeled tractors 拖拉机 安全要求 第1部分:轮式拖拉机 |
China National Standards AF |
English PDF |
GB/T 19316-2008 |
Small crAFt - Remote steering systems for inboard mini jet boats 小艇 小型舷内机喷水艇的遥控操舵系统 |
China National Standards AF |
English PDF |
GB/T 16696-2008 |
Small crAFt - Craft identification - Coding system 小艇 艇体标识 代码 |
China National Standards AF |
English PDF |
GB/T 14654-2008 |
Elastic damping leAF damper 弹性阻尼簧片减振器 |
China National Standards AF |
English PDF |
GB/T 12922-2008 |
Elastic damping leAF coupling 弹性阻尼簧片联轴器 |
China National Standards AF |
English PDF |
GB 8408-2008 |
Amusement device sAFety code 游乐设施安全规范 |
China National Standards AF |
English PDF |
GB/T 21382-2008 |
Specification for optical requirements of photoluminescent (phosphorescent) sAFety marking 光致发光(磷光)安全标记光学性能要求 |
China National Standards AF |
English PDF |
GB/T 21381-2008 |
Coding rules for entity identification code of trAFfic management geographical information - City road 交通管理地理信息实体标识编码规则 城市道路 |
China National Standards AF |
English PDF |
GB/T 21379-2008 |
Classification and coding of the attribute of trAFfic management information - City road 交通管理信息属性分类与编码 城市道路 |
China National Standards AF |
English PDF |
GB/T 21394-2008 |
Road trAFfic information service -Information classifying and coding 道路交通信息服务 信息分类与编码 |
China National Standards AF |
English PDF |
GB/T 16887-2008 |
SAFety requirements for sleeper bus construction 卧铺客车结构安全要求 |
China National Standards AF |
English PDF |
GB/T 21384-2008 |
Electric water-heater sAFety valve 电热水器用安全阀 |
China National Standards AF |
English PDF |
GB/T 21424-2008 |
Low-speed goods vehicles fuel tank - SAFety property requirements and test methods 低速货车燃油箱 安全性能要求和试验方法 |
China National Standards AF |
English PDF |
GB/T 21423-2008 |
Tri-wheel vehicles fuel tank - SAFety property requirements and test methods 三轮汽车燃油箱 安全性能要求和试验方法 |
China National Standards AF |
English PDF |
GB/T 21428-2008 |
Reciprocating internal combustion engine driven generating sets - SAFety 往复式内燃机驱动的发电机组 安全性 |
China National Standards AF |
English PDF |
GB/T 21291-2007 |
Technical specifications of sAFety and sanitation for surimi processing machinery 鱼糜加工机械安全卫生技术条件 |
China National Standards AF |
English PDF |
GB/T 21283.2-2007 |
Rotary shAFt lip-type seals incorporating thermoplastic sealing element - Part 2:Vocabulary 密封元件为热塑性材料的旋转轴唇形密封圈 第2部分:词汇 |
China National Standards AF |
English PDF |
GB/T 21283.1-2007 |
Rotary shAFt lip-type seals incorporating thermoplastic sealing elements-Part 1: Nominal dimensions and tolerances 密封元件为热塑性材料的旋转轴唇形密封圈 第1部分:基本尺寸和公差 |
China National Standards AF |
English PDF |
GB/T 13871.4-2007 |
Rotary shAFt lip type seals incorporating elastomeric sealing elements - Part 4:Performance test procedures 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards AF |
English PDF |
GB/T 13871.1-2007 |
Rotary shAFt lip type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances 密封元件为弹性体材料的旋转轴唇形密封圈 第1部分:基本尺寸和公差 |
China National Standards AF |
English PDF |
GB/T 5548-2007 |
Resin finishing agent - Determination of the sability of solution AFter adding catalyst 树脂整理剂 加催化剂后溶液稳定性的测定 |
China National Standards AF |
English PDF |
Find out:4778Items | To Page of: First -Previous-Next -Last | [36] [37] [38] [39] [40] [41] [42] |