GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 50289-2016 |
Code for urban engineering pIPelines comprehensive planning 城市工程管线综合规划规范 |
China National Standards IP |
English PDF |
GB 50150-2016 |
Electric equIPment installation engineeringstandard for hand-over test of electric equipment 电气装置安装工程电气设备交接试验标准 |
China National Standards IP |
English PDF |
GB 32166.1-2016 |
Personal protective equIPment—Eye and face protection—Occupational eye and face protectors—Part 1: Requirements 个体防护装备 眼面部防护 职业眼面部防护具 第1部分:要求 |
China National Standards IP |
English PDF |
GB/T 32570-2016 |
steel plates and strIPs for freight containers 集装箱用钢板及钢带 |
China National Standards IP |
English PDF |
GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pIPe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards IP |
English PDF |
GB/T 32488-2016 |
Ductile iron pIPes and fittings——Seal coats for cement mortar linings 球墨铸铁管和管件 水泥砂浆内衬密封涂层 |
China National Standards IP |
English PDF |
GB/T 5027-2016 |
Metallic materials—Sheet and strIP—Determination of plastic strain ratio 金属材料 薄板和薄带 塑性应变比(r值)的测定 |
China National Standards IP |
English PDF |
GB/T 32552-2016 |
Automated full perIPheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管(埋弧焊除外)的自动全圆周超声厚度检测 |
China National Standards IP |
English PDF |
GB/Z 16935.6-2016 |
Insulation coordination for equIPment within low-voltage systems—Part 2-2: Interface considerations—Application guide 低压系统内设备的绝缘配合 第2-2部分:交界面考虑 应用指南 |
China National Standards IP |
English PDF |
GB/T 4854.9-2016 |
Acoustics—Reference zero for the calibration of audiometric equIPment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分:确定基准听阈级的优选测试条件 |
China National Standards IP |
English PDF |
GB/T 32535-2016 |
Runouts, undercuts and chamfers for pIPe threads 管螺纹收尾、肩距、退刀槽和倒角 |
China National Standards IP |
English PDF |
GB/T 32526-2016 |
General specification for the equIPment of passing azimuth angle vertically 方位垂直传递装置通用规范 |
China National Standards IP |
English PDF |
GB/T 32525-2016 |
General specification for photoelectric tracking and measuring equIPment 光电跟踪测量设备通用规范 |
China National Standards IP |
English PDF |
GB/T 32480-2016 |
Textile machinery—Mixing bale openers for cotton spinning—Vocabulary and princIPles of construction 纺织机械 棉纺用开包混棉机 术语、定义和结构原理 |
China National Standards IP |
English PDF |
GB/T 32474-2016 |
Rubber hoses and hose assemblies for petroleum drilling well control equIPments 石油钻井井控设备用橡胶软管及软管组合件 |
China National Standards IP |
English PDF |
GB/T 31052.10-2016 |
Lifting appliances—Code of inspection and maintenance—Part 10: Series lifting equIPments 起重机械 检查与维护规程 第10部分:轻小型起重设备 |
China National Standards IP |
English PDF |
GB/T 2550-2016 |
Gas welding equIPment—Rubber hoses for welding, cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 |
China National Standards IP |
English PDF |
GB/T 19436.4-2016 |
Electrical safety of machinery—Electro-sensitive protective equIPment—Part 4: Particular requirements for equipment using vision based protective devices (VBPD) 机械电气安全 电敏保护设备 第4部分:使用视觉保护装置(VBPD)设备的特殊要求 |
China National Standards IP |
English PDF |
GB/T 19355.2-2016 |
Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 2: Hot dIP galvanizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分:热浸镀锌 |
China National Standards IP |
English PDF |
GB/T 19355.1-2016 |
Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 1: General princIPles of design and corrosion resistance 锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分:设计与防腐蚀的基本原则 |
China National Standards IP |
English PDF |
GB/T 16842-2016 |
Protection of persons and equIPment by enclosures—Probe for verification 外壳对人和设备的防护 检验用试具 |
China National Standards IP |
English PDF |
GB/T 14598.302-2016 |
Specification for arc fiash protection equIPment 弧光保护装置技术要求 |
China National Standards IP |
English PDF |
GB/T 14598.149-2016 |
Measuring relays and protection equIPment—Part 149: Functional requirements for thermal electrical relays 量度继电器和保护装置 第149部分:电热继电器功能要求 |
China National Standards IP |
English PDF |
GB/T 14048.7-2016 |
Low-voltage switchgear and controlgear—Part 7-1:Ancillary equIPment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分:辅助器件 铜导体的接线端子排 |
China National Standards IP |
English PDF |
GB/T 14048.18-2016 |
Low-voltage switchgear and controlgear—Part 7-3: Ancillary equIPment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分:辅助器件 熔断器接线端子排的安全要求 |
China National Standards IP |
English PDF |
GB/T 12145-2016 |
Quality criterion of water and steam for power plant and steam-generating equIPment 火力发电机组及蒸汽动力设备水汽质量 |
China National Standards IP |
English PDF |
GB/T 32543-2016 |
Building construction machinery and equIPment—Concrete delivery pipes—Connection types and safety requirements 建筑施工机械与设备 混凝土输送管 连接型式和安全要求 |
China National Standards IP |
English PDF |
GB/T 32542-2016 |
Building construction machinery and equIPment—Distributing mast for concrete pumps principles of calculation and stability 建筑施工机械与设备 混凝土泵送用布料杆计算原则和稳定性 |
China National Standards IP |
English PDF |
GB/T 7261-2016 |
Basic testing method for relaying protection and security automatic equIPment 继电保护和安全自动装置基本试验方法 |
China National Standards IP |
English PDF |
GB/T 10171-2016 |
Building construction machinery and equIPment—Concrete mixing plant(tower) 建筑施工机械与设备 混凝土搅拌站(楼) |
China National Standards IP |
English PDF |
GB 51160-2016 |
Technical code for fibre reinforced plastics equIPment and piping engineering 纤维增强塑料设备和管道工程技术规范 |
China National Standards IP |
English PDF |
GB/T 12606-2016 |
Automated full perIPheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接(埋弧焊除外)铁磁性钢管纵向和/或横向缺欠的全圆周自动漏磁检测 |
China National Standards IP |
English PDF |
GB/T 32552-2016 |
Automated full perIPheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管(埋弧焊除外)的自动全圆周超声厚度检测 |
China National Standards IP |
English PDF |
GB 23200.101-2016 |
National food safety standards—Determination of multIPle miticide residues in royal-jelly - Gas chromatography-mass spectrometry 食品安全国家标准 蜂王浆中多种杀螨剂残留量的测定 气相色谱-质谱法 |
China National Standards IP |
English PDF |
GB 23200.100-2016 |
National food safety standards—Determination of multIPle pyrethroid pesticides residues in royal-jelly - Gas chromatography 食品安全国家标准 蜂王浆中多种菊酯类农药残留量的测定 气相色谱法 |
China National Standards IP |
English PDF |
GB 23200.99-2016 |
National food safety standards Determination of multIPle carbamate pesticides residues in royal-jelly - Liquid chromatography-mass spectrometry 食品安全国家标准 蜂王浆中多种氨基甲酸酯类农药残留量的测定 液相色谱-质谱/质谱法 |
China National Standards IP |
English PDF |
GB 23200.90-2016 |
National food safety standards—Determination of multIPle carbamate pesticides residues in milk and milk products - Liquid chromatography-mass spectrometry 食品安全国家标准 乳及乳制品中多种氨基甲酸酯类农药残留量的测定 液相色谱-质谱法 |
China National Standards IP |
English PDF |
GB 23200.88-2016 |
National food safety standards—Determination of the multIPle organochlorine pesticides residue in aquatic products 食品安全国家标准 水产品中多种有机氯农药残留量的检测方法 |
China National Standards IP |
English PDF |
GB 23200.86-2016 |
National food safety standards—Determination of multIPle organochlorine pesticides residues in milk and milk products - Gas chromatography-mass spectrometry 食品安全国家标准 乳及乳制品中多种有机氯农药残留量的测定 气相色谱-质谱/质谱法 |
China National Standards IP |
English PDF |
GB 23200.85-2016 |
National food safety standards—Determination of multIPle pyrethroid pesticide residues in milk and milk products - Gas chromatography-mass spectrometry 食品安全国家标准 乳及乳制品中多种拟除虫菊酯农药残留量的测定 气相色谱-质谱法 |
China National Standards IP |
English PDF |
GB 23200.83-2016 |
National food safety standards—Determination of IProbenfos residue in foods 食品安全国家标准 食品中异稻瘟净残留量的检测方法 |
China National Standards IP |
English PDF |
GB 23200.64-2016 |
National food safety standards—Determination of pyrIProxyfen residue in foods - Liquid chromatography-mass spectrometry 食品安全国家标准 食品中吡丙醚残留量的测定 液相色谱-质谱/质谱法 |
China National Standards IP |
English PDF |
GB 23200.46-2016 |
National food safety standards—Determination of pyrimethanil, mepanIPyrim, myclobutanil and azoxystrobin residues in foods Gas chromatography-mass spectrometry 食品安全国家标准 食品中嘧霉胺、嘧菌胺、腈菌唑、嘧菌酯残留量的测定 气相色谱-质谱法 |
China National Standards IP |
English PDF |
GB 23200.41-2016 |
National food safety standards—Determination of dimethIPin residue in foods 食品安全国家标准 食品中噻节因残留量的检测方法 |
China National Standards IP |
English PDF |
GB 23200.28-2016 |
National food safety standards—Determination of multIPle ether herbicides residues in foods Gas chromatography - mass spectrometry 食品安全国家标准 食品中多种醚类除草剂残留量的测定 气相色谱-质谱法 |
China National Standards IP |
English PDF |
GB 23200.2-2016 |
National food safety standards—Determination of dIPhenyl ether herbicide residues in cereals and oil seeds Gas chromatography-mass spectrometry 食品安全国家标准 除草剂残留量检测方法第2部分:气相色谱-质谱法测定 粮谷及油籽中二苯醚类除草剂残留量 |
China National Standards IP |
English PDF |
GB/T 33442-2016 |
General technical specifications for instruments and equIPments for ocean energy survey 海洋能调查仪器设备通用技术条件 |
China National Standards IP |
English PDF |
GB/T 33434-2016 |
Determination of fume emission rate during arc welding of shIPbuilding 船舶电弧焊烟尘排放率测定方法 |
China National Standards IP |
English PDF |
GB/Z 33440-2016 |
General requirements for interchangeability of natural gas entering long-distance pIPeline network 进入长输管网天然气互换性一般要求 |
China National Standards IP |
English PDF |
GB/T 32419.1-2015 |
Information technology—Specification for SOA technical implementation—Part 1: Service descrIPtion 信息技术 SOA 技术实现规范 第1 部分:服务描述 |
China National Standards IP |
English PDF |
GB/T 32417-2015 |
Information technology—Office equIPment accessibility guidelines for elderly persons and persons with disabilities 信息技术 用于老年人和残疾人的办公设备可访问性指南 |
China National Standards IP |
English PDF |
GB/T 32366-2015 |
Biodegradable poly(butylene adIPate terephthalate) (PBAT) 生物降解聚对苯二甲酸-己二酸丁二酯(PBAT) |
China National Standards IP |
English PDF |
GB 15558.1-2015 |
Buried polyethylene(PE) pIPing systems for the supply of gaseous fuels—Part 1 :Pipes 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材 |
China National Standards IP |
English PDF |
GB/T 32468-2015 |
Copper clad aluminum plate, sheets and strIPs 铜铝复合板带 |
China National Standards IP |
English PDF |
GB/T 32378-2015 |
Glass-reinforced thermosetting plastics (GRP) pIPes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料(GRP)管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 |
China National Standards IP |
English PDF |
GB/Z 32342-2015 |
Speciality agriculture—General princIPles for protection and heritage 特色农业 保护与传承通则 |
China National Standards IP |
English PDF |
GB/T 9647-2015 |
Thermoplastics pIPes—Determination of ring stiffness 热塑性塑料管材 环刚度的测定 |
China National Standards IP |
English PDF |
GB/T 4219.2-2015 |
Unplasticizedpoly (vinyl chloride) (PVC-U) pIPing system for industrial applications—Part 2: Fittings 工业用硬聚氯乙烯(PVC-U)管道系统 第2部分:管件 |
China National Standards IP |
English PDF |
GB/T 32463-2015 |
Identification method for material of polypropylene (PP-R, PP-B, PP-H ) pIPes or fittings 聚丙烯(PP-R、PP-B、PP-H)管材、管件材质鉴别方法 |
China National Standards IP |
English PDF |
GB/T 32439-2015 |
Cross helically wound steel wires reinforced-polyethylene composite pIPelines for water supply 给水用钢丝网增强聚乙烯复合管道 |
China National Standards IP |
English PDF |
GB/T 32434-2015 |
Plastics pIPes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 塑料管材和管件 燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序 |
China National Standards IP |
English PDF |
GB/T 32403.2-2015 |
Technical requirements for equIPments in broadband customer network based on telecommunication network—Part 2:Enterprise gateway 基于公用电信网的宽带客户网络设备技术要求 第2部分:企业用宽带客户网关 |
China National Standards IP |
English PDF |
GB/T 32403.1-2015 |
Technical requirements for equIPments in broadband customer network based on telecommunication network—Part 1:Residential gateway 基于公用电信网的宽带客户网络设备技术要求 第1部分:家庭用宽带客户网关 |
China National Standards IP |
English PDF |
GB/T 32350.1-2015 |
Railway applications—Insulation coordination—Part 1: Basic requirements—Clearances and creepage distances for all electrical and electronic equIPment 轨道交通 绝缘配合 第1部分:基本要求 电工电子设备的电气间隙和爬电距离 |
China National Standards IP |
English PDF |
GB/T 32347.3-2015 |
Railway applications—Environmental conditions for equIPment —Part 3: Equipment for signaling and telecommunications 轨道交通 设备环境条件 第3部分:信号和通信设备 |
China National Standards IP |
English PDF |
GB/T 32347.2-2015 |
Railway applications—Environmental conditions for equIPment—Part 2:Fixed electrical installations 轨道交通 设备环境条件 第2部分:地面电气设备 |
China National Standards IP |
English PDF |
GB/T 32347.1-2015 |
Railway applications—Environmental conditions for equIPment—Part 1: Equipment on board rolling stock 轨道交通 设备环境条件 第1部分:机车车辆设备 |
China National Standards IP |
English PDF |
GB/T 21283.6-2015 |
Rotary shaft lIP-type seals incorporating thermoplastic sealing elements—Part 6: Properties requirements for the thermoplastic and elastic material 密封元件为热塑性材料的旋转轴唇形密封圈 第6部分:热塑性材料与弹性体包覆材料的性能要求 |
China National Standards IP |
English PDF |
GB/T 18746-2015 |
ZIPper terminology 拉链术语 |
China National Standards IP |
English PDF |
GB/T 13824-2015 |
Mechanical vibration of rotating and recIProcating machinery—Requirements for instruments for measuring vibration severity 旋转与往复式机器的机械振动 对振动烈度测量仪的要求 |
China National Standards IP |
English PDF |
GB/T 13441.5-2015 |
Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration—Part 5: Method for evaluation of vibration containing multIPle shocks 机械振动与冲击 人体暴露于全身振动的评价 第5部分:包含多次冲击的振动的评价方法 |
China National Standards IP |
English PDF |
GB/T 12809-2015 |
Laboratory glassware—PrincIPles of design and construction of volumetric glassware 实验室玻璃仪器 玻璃量器的设计和结构原则 |
China National Standards IP |
English PDF |
GB/T 12808-2015 |
Laboratory glassware—One mark pIPettes 实验室玻璃仪器 单标线吸量管 |
China National Standards IP |
English PDF |
GB 32460-2015 |
Fire emergency rescue equIPments—General technical specification for forcible entry tools 消防应急救援装备 破拆机具通用技术条件 |
China National Standards IP |
English PDF |
GB 32459-2015 |
Fire emergency rescue equIPments—General technical specification for manual rescue tools 消防应急救援装备 手动破拆工具通用技术条件 |
China National Standards IP |
English PDF |
GB/T 3319-2015 |
Confirmation of the rated output of electric locomotives and electric multIPle units 电力机车和电动车组额定功率的确定 |
China National Standards IP |
English PDF |
GB/T 13941-2015 |
DIPhenylmethane diisocyanate 二苯基甲烷二异氰酸酯 |
China National Standards IP |
English PDF |
GB/T 32359-2015 |
Test and evaluation methods of reverse osmosis equIPment for seawater desalination 海水淡化反渗透膜装置测试评价方法 |
China National Standards IP |
English PDF |
GB/T 32338-2015 |
Petroleum and natural gas industries—Drilling and well servicing equIPment—Mud-pump 石油天然气工业 钻井和修井设备 钻井泵 |
China National Standards IP |
English PDF |
GB/T 25428-2015 |
Petroleum and natural gas industries—Drilling and production equIPment—Drilling and well-servicing structures 石油天然气工业 钻井和采油设备 钻井和修井井架、底座 |
China National Standards IP |
English PDF |
GB/T 21410-2015 |
Petroleum and netural gas industries—Downhole equIPment—Lock mandrels and landing nipples 石油天然气工业 井下设备 锁定心轴和定位接头 |
China National Standards IP |
English PDF |
GB/T 20970-2015 |
Petroleum and natural gas industries—Downhole equIPment—Packers and bridge plugs 石油天然气工业 井下工具 封隔器和桥塞 |
China National Standards IP |
English PDF |
GB/T 17744-2015 |
Petroleum and natural gas industries—Drilling and well servicing equIPment 石油天然气工业 钻井和修井设备 |
China National Standards IP |
English PDF |
GB/T 19286-2015 |
Electromagnetic compatibility requirement and measurement methods for telecommunication network equIPment 电信网络设备的电磁兼容性要求及测量方法 |
China National Standards IP |
English PDF |
GB/T 32319-2015 |
Specification of descrIPtion for banking product 银行业产品说明书描述规范 |
China National Standards IP |
English PDF |
GB/T 18987-2015 |
Radiotherapy equIPment—Coordinates, movements and scales 放射治疗设备 坐标、运动与刻度 |
China National Standards IP |
English PDF |
GB 9706.16-2015 |
Medical electrical equIPment—Part 2: Particular requirements for the safety of radiotherapy simulators 医用电气设备 第2部分:放射治疗模拟机安全专用要求 |
China National Standards IP |
English PDF |
GB/T 5276-2015 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descrIPtions of dimensions 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注 |
China National Standards IP |
English PDF |
GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental simulation test equIPment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards IP |
English PDF |
GB/T 32217-2015 |
Hydraulic fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic recIProcating applications 液压传动 密封装置 评定液压往复运动密封件性能的试验方法 |
China National Standards IP |
English PDF |
GB/T 1962.1-2015 |
Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equIPment—Part 1: General requirement 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求 |
China National Standards IP |
English PDF |
GB/T 16886.20-2015 |
Biological evaluation of medical devices—Part 20: PrincIPles and methods for immunotoxicology testing of medical devices 医疗器械生物学评价 第20部分:医疗器械免疫毒理学试验原则和方法 |
China National Standards IP |
English PDF |
GB/T 13871.5-2015 |
Rotary shaft lIP-type seals incorporating elastomeric sealing elements—Part 5: Identification of visual imperfections 密封元件为弹性体材料的旋转轴唇形密封圈 第5部分: 外观缺陷的识别 |
China National Standards IP |
English PDF |
GB/T 13871.2-2015 |
Rotary shaft lIP-type seals incorporating elastomerice sealing elements—Part 2: Vocabulary 密封元件为弹性体材料的旋转轴唇形密封圈 第2部分:词汇 |
China National Standards IP |
English PDF |
GB 32275-2015 |
Technical specifications of pIPeline safety apparatus for fire dampers and explosion protection in textile industry 纺织工业防火防爆管道安全装置技术规范 |
China National Standards IP |
English PDF |
GB/T 8650-2015 |
Evaluation of pIPeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards IP |
English PDF |
GB/T 32183-2015 |
Aluminium strIPs for computer-to-printing plates 计算机直接排版印刷版基用铝带材 |
China National Standards IP |
English PDF |
GB/T 32166.2-2015 |
Personal protective equIPment—Eye and face protection—Occupational eye and face protectors—Part 2: Test methods 个体防护装备 眼面部防护 职业眼面部防护具 第2部分:测量方法 |
China National Standards IP |
English PDF |
GB/T 20564.8-2015 |
Continuously cold rolled high strength steel sheet and strIP for automobile—Part 8: Complex phase steel 汽车用高强度冷连轧钢板及钢带 第8部分:复相钢 |
China National Standards IP |
English PDF |
GB/T 17006.11-2015 |
Evaluation and routine testing in medical imaging departments—Part 2-6: Constancy tests—Imaging performance of computed tomography X-ray equIPment 医用成像部门的评价及例行试验 第2-6部分:X射线计算机体层摄影设备成像性能稳定性试验 |
China National Standards IP |
English PDF |
Find out:6167Items | To Page of: First -Previous-Next -Last | [19] [20] [21] [22] [23] [24] [25] |