GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 19762-2007 |
The minimum allowable values of energy efficieNCy and evaluating values of energy conservation of centrifugal pump for fresh water 清水离心泵能效限定值及节能评价值 |
China National Standards NC |
English PDF |
GB/T 21144-2007 |
Solid coNCrete brick 混凝土实心砖 |
China National Standards NC |
English PDF |
GB/T 21120-2007 |
synthetic fibers for cement , cement mortar and coNCrete 水泥混凝土和砂浆用合成纤维 |
China National Standards NC |
English PDF |
GB/T 21163.2-2007 |
Agricultural grain driers - Determination of drying performaNCe - Part 2: Additional procedures and crop - specific requirements 农业谷物干燥机 干燥性能的测定 第2部分:附加测定规程和特定谷物要求 |
China National Standards NC |
English PDF |
GB/T 21163.1-2007 |
Agricultural grain driers - Determination of drying performaNCe - Part 1: General 农业谷物干燥机 干燥性能的测定 第1部分:总则 |
China National Standards NC |
English PDF |
GB/T 21162-2007 |
Conversion rule for specific heat consumption and throughput of coNCurrent - Flow grain dryer 顺流粮食干燥机单位耗热量与处理量折算规则 |
China National Standards NC |
English PDF |
GB/T 21160-2007 |
Agricultural trailers - BalaNCed and semi-mounted trailers - Determination of payload, vertical static load and axle load 农用挂车 全挂车和半挂车有效载荷、垂直静态载荷和轴载荷的测定 |
China National Standards NC |
English PDF |
GB/T 21159.1-2007 |
Equipment for sowing and planting - Disks - part 1: CoNCave disks type D1 - Dimensions 播种和种植机械 圆盘 第1部分:D1型凹面圆盘 尺寸 |
China National Standards NC |
English PDF |
GB/T 21153-2007 |
Earth-moving machinery - Units for dimensions, performaNCe and capacities, and their measurement accuracies 土方机械 尺寸、性能和参数的单位与测量准确度 |
China National Standards NC |
English PDF |
GB/T 21152-2007 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performaNCe requirements and test procedures 土方机械 轮胎式机器 制动系统的性能要求和试验方法 |
China National Standards NC |
English PDF |
GB/T 21171-2007 |
Technical terms of fragraNCes & flavors 香料香精术语 |
China National Standards NC |
English PDF |
GB/T 22004-2007 |
Food safety management systems - GuidaNCe on the application of GB/T 22000-2006 食品安全管理体系 GB/T 22000-2006的应用指南 |
China National Standards NC |
English PDF |
GB/T 21172-2007 |
Sensory analysis - General guidaNCe and test method for assessment of the colour of foods 感官分析 食品颜色评价的总则和检验方法 |
China National Standards NC |
English PDF |
GB/Z 21235-2007 |
PriNCiples and guidelines for the conduct of microbiological risk assessment 微生物危险性评估的原理和指南 |
China National Standards NC |
English PDF |
GB/T 21322-2007 |
Determination of 3-methyl-quinoxaline-2-carboxylic acid residues in animal origin food - High performaNCe liquid chromatography method 动物源食品中3-甲基喹喔啉-2-羧酸残留的测定 高效液相色谱法 |
China National Standards NC |
English PDF |
GB/T 21321-2007 |
Method for determination of avermectins residue in animal origin food - Immunoaffinity -high performaNCe liquid chromatograph 动物源食品中阿维菌素类药物残留量的测定 免疫亲和-液相色谱法 |
China National Standards NC |
English PDF |
GB/T 21313-2007 |
Analysis of β-agonists in foods of animal origin by high performaNCe liquid chromatography tandem mass spectrometry 动物源性食品中β-受体激动剂残留检测方法 液相色谱-质谱/质谱法 |
China National Standards NC |
English PDF |
GB/T 21312-2007 |
Analysis of fourteen quinolones in food of animal origin by high performaNCe liquid chromatography tandem mass spectrometry 动物源性食品中14种喹诺酮药物残留检测方法 液相色谱-质谱/质谱法 |
China National Standards NC |
English PDF |
GB/T 21108-2007 |
Determination of choramphenicol in feeds high performaNCe liquid chromatography tandem mass spectometry 饲料中氯霉素的测定 高效液相色谱串联质谱法 |
China National Standards NC |
English PDF |
GB 50166-2007 |
Code for installation and acceptaNCe of fire alarm system 火灾自动报警系统施工及验收规范 |
China National Standards NC |
English PDF |
GB/T 17215.301-2007 |
Particular requirements for multi - fuNCtion electricity meters 多功能电能表 特殊要求 |
China National Standards NC |
English PDF |
GB/T 21127-2007 |
Technical specification of identification and evaluation for drought resistaNCe in wheat 小麦抗旱性鉴定评价技术规范 |
China National Standards NC |
English PDF |
GB/T 21131-2007 |
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Determination of particulate matter by ultraviolet absorbaNCe and by fluorescence 环境烟草烟气 可吸入悬浮颗粒物的估测 用紫外吸收法和荧光法测定粒相物 |
China National Standards NC |
English PDF |
GB/T 2934-2007 |
General-purpose flat pallets for through transit of goods - PriNCipal dimensions and tolerances 联运通用平托盘 主要尺寸及公差 |
China National Standards NC |
English PDF |
GB/T 21111-2007 |
Projection in indoor rooms - Classification of transmitting projection screens and measurement of their transmitted luminaNCe levels 室内放映 透射放映银幕的分类和亮度测定 |
China National Standards NC |
English PDF |
GB/T 21110-2007 |
Projectors - Image size/projection distaNCe calculations 放映设备 画面尺寸和放映距离的计算 |
China National Standards NC |
English PDF |
GB/T 21109.3-2007 |
FuNCtional safety-Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels 过程工业领域安全仪表系统的功能安全 第3部分:确定要求的安全完整性等级的指南 |
China National Standards NC |
English PDF |
GB/T 21109.2-2007 |
FuNCtional safety-Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 过程工业领域安全仪表系统的功能安全 第2部分:GB/T 21109.1的应用指南 |
China National Standards NC |
English PDF |
GB/T 21109.1-2007 |
FuNCtional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements 过程工业领域安全仪表系统的功能安全 第1部分:框架、定义、系统、硬件和软件要求 |
China National Standards NC |
English PDF |
GB/T 21099.2-2007 |
FuNCtion blocks for process control - Part 2:Specification of FB concept and electronic device description language 过程控制用功能块 第2部分:功能块概念及电子设备描述语言的规范 |
China National Standards NC |
English PDF |
GB/T 21099.1-2007 |
FuNCtion blocks for process control - Part 1: Overview of system aspects 过程控制用功能块 第1部分:系统方面的总论 |
China National Standards NC |
English PDF |
GB/T 9726-2007 |
Chemical reagent - General rule for the determination of permanganate-reducing substaNCes 化学试剂 还原高锰酸钾物质测定通则 |
China National Standards NC |
English PDF |
GB/T 3452.2-2007 |
Fluid power systems-O-rings - Part 2: Quality acceptaNCe criteria 液压气动用O 形橡胶密封圈 第2部分:外观质量检验规范 |
China National Standards NC |
English PDF |
GB/T 7789-2007 |
Dynamic test method for performaNCe of marine antifouling paint 船舶防污漆防污性能动态试验方法 |
China National Standards NC |
English PDF |
GB/T 5370-2007 |
Method for testing antifouling panels in shallow submergeNCe 防污漆样板浅海浸泡试验方法 |
China National Standards NC |
English PDF |
GB/T 21089.1-2007 |
Testing method of application performaNCe of waterborne additives for architectural coatings - part 1: Dispersing agent,Defoaming agent, Thickening agent 建筑涂料水性助剂应用性能试验方法 第1部分:分散剂、消泡剂和增稠剂 |
China National Standards NC |
English PDF |
GB/T 1771-2007 |
Paints and varnishes - Determination of resistaNCe to neutral salt spray(fog) 色漆和清漆 耐中性盐雾性能的测定 |
China National Standards NC |
English PDF |
GB/T 1741-2007 |
Test method for determining the resistaNCe of paints film to mold 漆膜耐霉菌性测定法 |
China National Standards NC |
English PDF |
GB/T 1740-2007 |
Determination of resistaNCe to heat and humidity of paint films 漆膜耐湿热测定法 |
China National Standards NC |
English PDF |
GB/T 6167-2007 |
Methods for testing the performaNCe of airborne particle counter 尘埃粒子计数器性能试验方法 |
China National Standards NC |
English PDF |
GB/T 223.80-2007 |
Iron,steel and alloy - Determination of trace bismuth and arsenic contents - Hydride generation - atomic fluoresceNCe spectrometric method 钢铁及合金 铋和砷含量的测定 氢化物发生-原子荧光光谱法 |
China National Standards NC |
English PDF |
GB/T 223.79-2007 |
Iron and steel - Determination of multi - element contents - X - ray fluoresceNCe spectrometry (Routine method) 钢铁 多元素含量的测定 X-射线荧光光谱法(常规法) |
China National Standards NC |
English PDF |
GB/T 16728-2007 |
Prestressed coNCrete ribbed roof slabs 预应力混凝土肋形屋面板 |
China National Standards NC |
English PDF |
GB/T 16727-2007 |
Precast prestressed coNCrete panel for composite slab 叠合板用预应力混凝土底板 |
China National Standards NC |
English PDF |
GB/T 15227-2007 |
Test method of air permeability, watertightness, wind load resistaNCe performance for curtain walls 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards NC |
English PDF |
GB/T 14370-2007 |
ANChorage,grip and coupler for prestressing tendons 预应力筋用锚具、夹具和连接器 |
China National Standards NC |
English PDF |
GB/T 14040-2007 |
Prestressed coNCrete hollow-core slabs 预应力混凝土空心板 |
China National Standards NC |
English PDF |
GB/T 11093-2007 |
Liquid eNCapsulated czochralski - grown gallium arsenide single crystals and as-cut slices 液封直拉法砷化镓单晶及切割片 |
China National Standards NC |
English PDF |
GB/T 21097.1-2007 |
General requirements on fixed number of years of safety use and recycling for household and similar electrical appliaNCes 家用和类似用途电器的安全使用年限和再生利用通则 |
China National Standards NC |
English PDF |
GB/T 21093-2007 |
High-pressure mercury vapour lamps - PerformaNCe specifications 高压汞灯 性能要求 |
China National Standards NC |
English PDF |
GB/T 21091-2007 |
Self-ballasted electrodeless fluorescent lamps for general lighting services - PerformaNCe requirements 普通照明用自镇流无极荧光灯 性能要求 |
China National Standards NC |
English PDF |
GB/T 15766.2-2007 |
Lamps for road vehicles - PerformaNCe requirements 道路机动车辆灯泡 性能要求 |
China National Standards NC |
English PDF |
GB/Z 6113.404-2007 |
Specification for radio disturbaNCe and immunity measuring apparatus and methods - Part 4-4 Uncertainties,statistics and limit modelling- Statistics of complaints and a model for the calculation of limits 无线电骚扰和抗扰度测量设备和测量方法规范 第4-4部分:不确定度、统计学和限值建模 抱怨的统计和限值的计算模型 |
China National Standards NC |
English PDF |
GB/Z 6113.403-2007 |
Specification for radio disturbaNCe and immunity measuring apparatus and methods - Part 4-3:Uncertainties,statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分:不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑 |
China National Standards NC |
English PDF |
GB/Z 6113.401-2007 |
Specification for radio disturbaNCe and immunity measuring apparatus and methods - Part 4-1: Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分: 不确定度、统计学和限值建模 标准化的EMC试验不确定度 |
China National Standards NC |
English PDF |
GB/T 11789-2007 |
Ropes and cordage-EquivaleNCe between naturai fibre ropes and man-made fibre ropes for use in the mooring of vessels 绳索和绳索制品 系船用的天然纤维绳索与化学纤维绳索之间的等效性 |
China National Standards NC |
English PDF |
GB/T 21080-2007 |
Banking and related finaNCial services - Sign-on authentication based on symmetric algorithm 银行业务和相关金融服务 基于对称算法的签名鉴别 |
China National Standards NC |
English PDF |
GB/T 21078.1-2007 |
Banking - Personal Identification Number management and security - Part 1: Basic priNCiples and requirements for online PIN handling in ATM and POS systems 银行业务 个人识别码的管理与安全 第1部分: ATM和POS系统中联机PIN处理的基本原则和要求 |
China National Standards NC |
English PDF |
GB/T 21076-2007 |
Securities and related finaNCial instruments - International securities identification numbering system 证券及相关金融工具 国际证券识别编码体系 |
China National Standards NC |
English PDF |
GB/T 19668.6-2007 |
Information system project surveillaNCe specification - Part 6: Information system project security surveillance specification 信息化工程监理规范 第6部分: 信息化工程安全监理规范 |
China National Standards NC |
English PDF |
GB/T 19668.5-2007 |
Information system project surveillaNCe specification - Part 5: Software project surveillance specification 信息化工程监理规范 第5部分: 软件工程监理规范 |
China National Standards NC |
English PDF |
GB/T 19668.4-2007 |
Information system project surveillaNCe specification - Part 4: Computer network system project surveillance specification 信息化工程监理规范 第4部分:计算机网络系统工程监理规范 |
China National Standards NC |
English PDF |
GB/T 19668.3-2007 |
Information system project surveillaNCe specification - Part 3: Electronic equipment room system project surveillance specification 信息化工程监理规范 第3部分:电子设备机房系统工程监理规范 |
China National Standards NC |
English PDF |
GB/T 19668.2-2007 |
Information system project surveillaNCe specification - Part 2: Generic cabling system project surveillance specification 信息化工程监理规范 第2部分:通用布缆系统工程监理规范 |
China National Standards NC |
English PDF |
GB 1499.2-2007 |
Steel for the reinforcement of coNCrete - Part 2: Hot rolled bars 钢筋混凝土用钢 第2部分:热轧带肋钢筋 |
China National Standards NC |
English PDF |
GB/T 5553-2007 |
Surface active agents - Determination of water repelleNCy of waterprooting agents 表面活性剂 防水剂 防水力测定法 |
China National Standards NC |
English PDF |
GB/T 14637-2007 |
Industrial circulating cooling water and scale-Determination of copper,ziNC-Atomic absorption spectrometric method 工业循环冷却水及水垢中铜、锌的测定 原子吸收光谱法 |
China National Standards NC |
English PDF |
GB/T 11276-2007 |
Surface active agents - Determination of the critical micellization coNCentration 表面活性剂 临界胶束浓度的测定 |
China National Standards NC |
English PDF |
GB/T 21005-2007 |
UV erythema refereNCe action spectrum,standard erythema dose and UV index 紫外红斑效应参照谱、标准红斑剂量和紫外指数 |
China National Standards NC |
English PDF |
GB/T 968-2007 |
Manufacturing toleraNCes on the threaded of portion taps 丝锥螺纹公差 |
China National Standards NC |
English PDF |
GB/T 20897.2-2007 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW iNClusive 充气艇 第2部分: 发动机最大额定功率为4.5kW~15kW的艇 |
China National Standards NC |
English PDF |
GB/T 11869-2007 |
Towing wiNChes for deep sea use 远洋船用拖曳绞车 |
China National Standards NC |
English PDF |
GB 10230.1-2007 |
Tap-changers - Part 1: PerformaNCe requirements and test methods 分接开关 第1部分:性能要求和试验方法 |
China National Standards NC |
English PDF |
GB/T 18294.4-2007 |
Technical identification method for fire - Part 4: High performaNCe liquid chromatography analysis 火灾技术鉴定方法 第4部分:高效液相色谱法 |
China National Standards NC |
English PDF |
GB/T 20967-2007 |
Non-destructive testing - Visual testing - General priNCiples 无损检测 目视检测 总则 |
China National Standards NC |
English PDF |
GB/T 20485.21-2007 |
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a refereNCe transducer 振动与冲击传感器校准方法 第21部分:振动比较法校准 |
China National Standards NC |
English PDF |
GB/T 21022.1-2007 |
Fibre optic connector interfaces - Part 1: General and guidaNCe 纤维光学连接器接口 第1部分: 总则和导则 |
China National Standards NC |
English PDF |
GB/T 18311.20-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic braNChing devices 纤维光学互连器件和无源器件 基本试验和测量程序 第3-20部分:检查和测量 纤维光学分路器件的方向性 |
China National Standards NC |
English PDF |
GB/T 15157.14-2007 |
Connectors for frequeNCies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards NC |
English PDF |
GB/T 11313.4-2007 |
Radio-frequeNCy connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分:外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards NC |
English PDF |
GB/T 11313.2-2007 |
Radio-frequeNCy connectors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器 第2部分: 9.52型射频同轴连接器分规范 |
China National Standards NC |
English PDF |
GB/T 20969.3-2007 |
Special environmental condition - Machinery for plateau - Part 3: The specification of select type and acceptaNCe check for construction machinery on plateau 特殊环境条件 高原机械 第3部分:高原型工程机械选型、验收规范 |
China National Standards NC |
English PDF |
GB 8771-2007 |
Maximum limits for soluble elements content of peNCil coating 铅笔涂层中可溶性元素最大限量 |
China National Standards NC |
English PDF |
GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficieNCy using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 |
China National Standards NC |
English PDF |
GB/T 20972.1-2007 |
Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General priNCiples for selection of cracking-resistant materials 石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分:选择抗裂纹材料的一般原则 |
China National Standards NC |
English PDF |
GB/T 20971-2007 |
Petroleum and natural gas industries - Equipment for well cementing - PerformaNCe testing of cementing float equipment 石油天然气工业 固井设备 注水泥浮动装置性能测试 |
China National Standards NC |
English PDF |
GB/T 20960-2007 |
NC horizontal turret 数控卧式转塔刀架 |
China National Standards NC |
English PDF |
GB/T 20959-2007 |
NC vertical turret 数控立式转塔刀架 |
China National Standards NC |
English PDF |
GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards NC |
English PDF |
GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards NC |
English PDF |
GB/T 20947-2007 |
Short-link chain for lifting purposes - Grade T,(types T,DAT and DT),fine-toleraNCe hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链 |
China National Standards NC |
English PDF |
GB/T 20946-2007 |
short link chain for lifting purposes - General conditions of acceptaNCe 起重用短环链 验收总则 |
China National Standards NC |
English PDF |
GB/T 15112-2007 |
Shaft sinking wiNCh 凿井绞车 |
China National Standards NC |
English PDF |
GB/T 1124.2-2007 |
Convex and coNCave milling cutters - Part 2:Technical specifications 凸凹半圆铣刀 第2部分: 技术条件 |
China National Standards NC |
English PDF |
GB/T 1124.1-2007 |
Convex and coNCave milling cutters - Part1:The types and dimensions 凸凹半圆铣刀 第1部分:型式和尺寸 |
China National Standards NC |
English PDF |
GB 16410-2007 |
Domestic gas cooking appliaNCes 家用燃气灶具 |
China National Standards NC |
English PDF |
GB/Z 20996.3-2007 |
PerformaNCe of high-voltage direct current(HVDC) systems - Part 3: Dynamic conditions 高压直流系统的性能 第3部分:动态 |
China National Standards NC |
English PDF |
GB/Z 20996.2-2007 |
PerformaNCe of high-voltage direct current(HVDC)systems - Part 2: Faults and switching 高压直流系统的性能 第2部分:故障和操作 |
China National Standards NC |
English PDF |
GB/Z 20996.1-2007 |
PerformaNCe of high-voltage direct current(HVDC) systems - Part 1: Steady-state conditions 高压直流系统的性能 第1部分:稳态 |
China National Standards NC |
English PDF |
GB/T 18802.321-2007 |
Components for low-voltage surge protective devices - Part 321: Specifications for avalaNChe breakdown diode(ABD) 低压电涌保护器元件 第321部分:雪崩击穿二极管(ABD)规范 |
China National Standards NC |
English PDF |
Find out:9985Items | To Page of: First -Previous-Next -Last | [75] [76] [77] [78] [79] [80] [81] |