Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7497.3-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 3: Mechanical and pin descripTiOns for the Eurocard configuration with pin and socket (indirect) connectors 微处理器系统总线 8位及16位数据（MULTIBUS I) 第3部分：对带有插针与插座连接器(间接配合)的欧洲板配置的机械与插针的描述 |
China National Standards TiO |
 English PDF |
| GB/T 7497.2-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 2: Mechanical and pin descripTiOns for the system bus configuration, with edge connectors(direct) 微处理器系统总线 8位及16位数据（MULTIBUS I） 第2部分：对带有边缘连接器(直接配合)的系统总线配置的机械与引脚的描述 |
China National Standards TiO |
English PDF |
| GB/T 7497.1-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 1: FuncTiOnal description with electrical and timing specifications 微处理器系统总线 8位及16位数据(MULTIBUS I) 第１部分: 电气与定时规范的功能描述 |
China National Standards TiO |
English PDF |
| GB/T 4761-2008 |
Codes for family relaTiOnship 家庭关系代码 |
China National Standards TiO |
English PDF |
| GB/T 22351.3-2008 |
IdentificaTiOn cards - Contactless integrated circuit(s) IC cards - Vicinity cards - Part 3: Anticollision and transmission protocol 识别卡 无触点的集成电路卡 邻近式卡 第3部分：防冲突和传输协议 |
China National Standards TiO |
English PDF |
| GB/T 22351.1-2008 |
IdentificaTiOn cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 1: Physical characteristics 识别卡 无触点的集成电路卡 邻近式卡 第1部分：物理特性 |
China National Standards TiO |
English PDF |
| GB/T 22318.2-2008 |
Surface acoustic wave(SAW)resonators - Part 1-2: Test condiTiOns 声表面波谐振器 第1-2部分：试验条件 |
China National Standards TiO |
English PDF |
| GB/T 22318.1-2008 |
Surface acoustic wave(SAW)resonators - Part 1-1: General informaTiOn and standard values 声表面波谐振器 第1-1部分：总则和标准值 |
China National Standards TiO |
English PDF |
| GB/T 22317.1-2008 |
Piezoelectric filters of assessed quality - Part 1: Generic sepcificaTiOn 有质量评定的压电滤波器 第1部分：总规范 |
China National Standards TiO |
English PDF |
| GB/T 16306-2008 |
Re-inspecTiOn and re-test procedures for assessment of declared quality levels 声称质量水平复检与复验的评定程序 |
China National Standards TiO |
English PDF |
| GB/T 16284.1-2008 |
InformaTiOn technology - Message handling systems(MHS) - Part 1: System and service overview 信息技术 信报处理系统(MHS) 第1部分: 系统和服务概述 |
China National Standards TiO |
English PDF |
| GB/T 16264.7-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 7: Selected object classes 信息技术 开放系统互连 目录 第7部分: 选定的客体类 |
China National Standards TiO |
English PDF |
| GB/T 16264.6-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 6: Selected attribute types 信息技术 开放系统互连 目录 第6部分: 选定的属性类型 |
China National Standards TiO |
English PDF |
| GB/T 16264.5-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 5: Protocol specifications 信息技术 开放系统互连 目录 第5部分: 协议规范 |
China National Standards TiO |
English PDF |
| GB/T 16264.4-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 4: Procedures for distributed operation 信息技术 开放系统互连 目录 第4部分: 分布式操作规程 |
China National Standards TiO |
English PDF |
| GB/T 16264.3-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 3: Abstract service definition 信息技术 开放系统互连 目录 第3部分: 抽象服务定义 |
China National Standards TiO |
English PDF |
| GB/T 16264.2-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 2: Models 信息技术 开放系统互连 目录 第2部分: 模型 |
China National Standards TiO |
English PDF |
| GB/T 16264.1-2008 |
InformaTiOn technology - Open systems interconnection - The directory - Part 1: Overview of concepts, models and services 信息技术 开放系统互连 目录 第1部分: 概念、模型和服务的概述 |
China National Standards TiO |
English PDF |
| GB/T 13393-2008 |
Guide to acceptance sampling inspecTiOn 验收抽样检验导则 |
China National Standards TiO |
English PDF |
| GB/T 12407-2008 |
Codes for posiTiOns classes 职务级别代码 |
China National Standards TiO |
English PDF |
| GB/T 7738-2008 |
NotaTiOns for designation of ferroallys 铁合金产品牌号表示方法 |
China National Standards TiO |
English PDF |
| GB/T 6726-2008 |
Cold forming secTiOnal steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards TiO |
English PDF |
| GB/T 6723-2008 |
Cold forming secTiOnal steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards TiO |
English PDF |
| GB/T 3650-2008 |
The general rules for inspecTiOn packing,storing transportation, marking and certification of ferroalloy 铁合金验收、包装、储运、标志和质量证明书的一般规定 |
China National Standards TiO |
English PDF |
| GB/T 224-2008 |
DeterminaTiOn of depth of decarburization of steels 钢的脱碳层深度测定法 |
China National Standards TiO |
English PDF |
| GB/T 221-2008 |
NotaTiOns for designation of iron and steel 钢铁产品牌号表示方法 |
China National Standards TiO |
English PDF |
| GB/T 22315-2008 |
Metallic materials - DeterminaTiOn of modulus of elasticity and poisson’s ratio 金属材料 弹性模量和泊松比试验方法 |
China National Standards TiO |
English PDF |
| GB/T 15014-2008 |
Physical quantity terminologies and definiTiOns of elastic alloy, expansion alloy, thermostat metal, resistance alloy 弹性合金、膨胀合金、热双金属、电阻合金物理量术语及定义 |
China National Standards TiO |
English PDF |
| GB/T 15007-2008 |
DesignaTiOns of corrosion-resisting alloy 耐蚀合金牌号 |
China National Standards TiO |
English PDF |
| GB/T 1467-2008 |
Method for chemical analysis of metallurgy product - General rules and regulaTiOns 冶金产品化学分析方法标准的总则及一般规定 |
China National Standards TiO |
English PDF |
| GB/T 1426-2008 |
The classificaTiOns of carbon materials 炭素材料分类 |
China National Standards TiO |
English PDF |
| GB/T 13304.2-2008 |
Steels classificaTiOn - Part 2: Classification of according to main quality classes and main property or application characteristics 钢分类 第2部分：按主要质量等级和主要性能或使用特性的分类 |
China National Standards TiO |
English PDF |
| GB/T 13304.1-2008 |
Steels classificaTiOn - Part 1: Classification of according to chemical composition 钢分类 第1部分：按化学成分分类 |
China National Standards TiO |
English PDF |
| GB/T 9341-2008 |
Plastics - DeterminaTiOn of flexural properties 塑料 弯曲性能的测定 |
China National Standards TiO |
English PDF |
| GB/T 8324-2008 |
Plastics - DeterminaTiOn of bulk factor of moulding materials 塑料 模塑材料体积系数的测定 |
China National Standards TiO |
English PDF |
| GB/T 4618.2-2008 |
Plastics - Epoxy resins - DeterminaTiOn of chlorine content - Part 2: Easily saponifiabLe chlorine 塑料 环氧树脂氯含量的测定 第2部分：易皂化氯 |
China National Standards TiO |
English PDF |
| GB/T 4618.1-2008 |
Plastics - Epoxy resins - DeterminaTiOn of chlorine content - Part 1: Inorganic chlorine 塑料 环氧树脂氯含量的测定 第1部分：无机氯 |
China National Standards TiO |
English PDF |
| GB/T 4616-2008 |
Plastics - Phenolic moulding materials - DeterminaTiOn of acetone-soluble matter（apparent resin content of material in the unmoulded state） 塑料 酚醛模塑料 丙酮可溶物（未模塑态材料的表观树脂含量）测定 |
China National Standards TiO |
English PDF |
| GB/T 4612-2008 |
Plastics - Epoxy compounds - DeterminaTiOn of epoxy equivalent 塑料 环氧化合物 环氧当量的测定 |
China National Standards TiO |
English PDF |
| GB/T 3403.1-2008 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 1: DesignaTiOn system and basis for specifications 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第1部分： 命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 3398.2-2008 |
Plastics - DeterminaTiOn of hardness - Part 2:Rockwell hardness 塑料 硬度测定 第2部分：洛氏硬度 |
China National Standards TiO |
English PDF |
| GB/T 3398.1-2008 |
Plastics - DeterminaTiOn of hardness - Part 1: Ball indentation method 塑料 硬度测定 第1部分：球压痕法 |
China National Standards TiO |
English PDF |
| GB/T 2895-2008 |
Plastics polyester resin - DeterminaTiOn of partial acid value and total acid value 塑料 聚酯树脂 部分酸值和总酸值的测定 |
China National Standards TiO |
English PDF |
| GB/T 2411-2008 |
Plastics and ebonite - DeterminaTiOn of indentation hardness by means of a duronmeter(shore hardness) 塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度） |
China National Standards TiO |
English PDF |
| GB/T 2410-2008 |
DeterminaTiOn of the luminous transmittance and haze of transparent plastics 透明塑料透光率和雾度的测定 |
China National Standards TiO |
English PDF |
| GB/T 2408-2008 |
Plastics - DeterminaTiOn of burning characteristics - Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards TiO |
English PDF |
| GB/T 2407-2008 |
Plastics - DeterminaTiOn of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定 |
China National Standards TiO |
English PDF |
| GB/T 2406.1-2008 |
Plastics - DeterminaTiOn of burning behaviour by oxygen index - Part 1: Guidance 塑料 用氧指数法测定燃烧行为 第1部分：导则 |
China National Standards TiO |
English PDF |
| GB/T 22277-2008 |
Advisory document for good laboratory practice - The role and responsibilities of the sponsor in the applicaTiOn of the principles of GLP 良好实验室规范建议性文件 在良好实验室规范原则的应用中委托方的任务和职责 |
China National Standards TiO |
English PDF |
| GB/T 22276-2008 |
Advisory document for good laboratory practice - Requesting and carrying out inspecTiOns and study audits in another country 良好实验室规范建议性文件 在另一国家中要求和执行检查与研究审核 |
China National Standards TiO |
English PDF |
| GB/T 22275.7-2008 |
Requirements of conduct for good laboratory practice - Part 7: The applicaTiOn of the GLP principles to the organisation and management of multi-site studies 良好实验室规范实施要求 第7部分：良好实验室规范原则在多场所研究的组织和管理中的应用 |
China National Standards TiO |
English PDF |
| GB/T 22275.6-2008 |
Requirements of conduct for good laboratory practice - Part 6: The applicaTiOn of the principles of GLP to computerised systems 良好实验室规范实施要求 第6部分：良好实验室规范原则在计算机化的系统中的应用 |
China National Standards TiO |
English PDF |
| GB/T 22275.5-2008 |
Requirements of conduct for good laboratory practice - Part 5: The applicaTiOn of the GLP principles to short term studies 良好实验室规范实施要求 第5部分：良好实验室规范原则在短期研究中的应用 |
China National Standards TiO |
English PDF |
| GB/T 22275.4-2008 |
Requirements of conduct for good laboratory practice - Part 4: The applicaTiOn of the GLP principles to field studies 良好实验室规范实施要求 第4部分：良好实验室规范原则在现场研究中的应用 |
China National Standards TiO |
English PDF |
| GB/T 22274.3-2008 |
Guidance for GLP monitoring authorities - Part 3 ：Guidance for the preparaTiOn of GLP inspection reports 良好实验室规范监督部门指南 第3部分：良好实验室规范检查报告的编制指南 |
China National Standards TiO |
English PDF |
| GB/T 22274.2-2008 |
Guidance for GLP monitoring authorities - Part 2: Guidance for the conduct of laboratory inspecTiOns and study audits 良好实验室规范监督部门指南 第2部分：执行实验室检查和研究审核的指南 |
China National Standards TiO |
English PDF |
| GB/T 22273-2008 |
Advisory document for good laboratory practice:The applicaTiOn of the principles of GLP to in vitro studies 良好实验室规范建议性文件 良好实验室规范原则在体外研究中的应用 |
China National Standards TiO |
English PDF |
| GB/T 22271.2-2008 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: PreparaTiOn of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards TiO |
English PDF |
| GB/T 22271.1-2008 |
Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: DesignaTiOn system and basis for specifications 塑料 聚甲醛（POM）模塑和挤塑材料 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 2035-2008 |
Terms and definiTiOns for plastics 塑料术语及其定义 |
China National Standards TiO |
English PDF |
| GB/T 22314-2008 |
Plastics - Epoxide resins - DeterminaTiOn of viscosity 塑料 环氧树脂 黏度测定方法 |
China National Standards TiO |
English PDF |
| GB/T 22313-2008 |
Plastics - Polyols for use in the producTiOn of polyurethan - Determination of water content 塑料 用于聚氨酯生产的多元醇 水含量的测定 |
China National Standards TiO |
English PDF |
| GB/T 22312-2008 |
Plastics - Polyacrylamide - DeterminaTiOn for residual acrylamide 塑料 聚丙烯酰胺 残留丙烯酰胺含量测定方法 |
China National Standards TiO |
English PDF |
| GB/T 1843-2008 |
Plastics - DeterminaTiOn of izod impact strength 塑料 悬臂梁冲击强度的测定 |
China National Standards TiO |
English PDF |
| GB/T 16582-2008 |
Plastics - DeterminaTiOn of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围） |
China National Standards TiO |
English PDF |
| GB/T 16578.1-2008 |
Plastics - Film and sheeting - DeterminaTiOn of tear resistance - Part 1：Trouser tear method 塑料 薄膜和薄片 耐撕裂性能的测定 第1部分: 裤形撕裂法 |
China National Standards TiO |
English PDF |
| GB/T 1636-2008 |
Plastics - DeterminaTiOn of apparent density material that can be poured from a specified funnel 塑料 能从规定漏斗流出的材料表观密度的测定 |
China National Standards TiO |
English PDF |
| GB/T 1632.1-2008 |
Plastics - DeterminaTiOn of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第1部分：通则 |
China National Standards TiO |
English PDF |
| GB/T 1630.1-2008 |
Plastics - Epoxy resins - Part 1: DesignaTiOn 塑料 环氧树脂 第1部分：命名 |
China National Standards TiO |
English PDF |
| GB/T 15223-2008 |
Plastics - Liquid resins - DeterminaTiOn of density by the pyknometer method 塑料 液体树脂 用比重瓶法测定密度 |
China National Standards TiO |
English PDF |
| GB/T 15098-2008 |
The principle of classificaTiOn of transport packaging groups of dangerous goods 危险货物运输包装类别划分方法 |
China National Standards TiO |
English PDF |
| GB/T 14484-2008 |
Plastics - DeterminaTiOn of bearing strength 塑料 承载强度的测定 |
China National Standards TiO |
English PDF |
| GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: PreparaTiOn of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards TiO |
English PDF |
| GB/T 1404.1-2008 |
Plastics - Phenolic powder moulding compounds - Part 1: DesignaTiOn system and basis for specifications 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范 |
China National Standards TiO |
English PDF |
| GB/T 12010.1-2008 |
Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: DesignaTiOn system and basis for specifications 塑料 聚乙烯醇材料（PVAL） 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 12003-2008 |
Unplasticized polyvinyl chloride(PVC-U) windows - DeterminaTiOn of dimensions 未增塑聚氯乙烯（PVC-U）塑料窗 外形尺寸的测定 |
China National Standards TiO |
English PDF |
| GB/T 11992-2008 |
DeterminaTiOn of exchange capacity of strong basic anion exchange resins in chloride form 氯型强碱性阴离子交换树脂交换容量测定方法 |
China National Standards TiO |
English PDF |
| GB/T 11547-2008 |
Plastic - Methods of test for the determinaTiOn of the effects of immersion in liquid chemicals 塑料 耐液体化学试剂性能的测定 |
China National Standards TiO |
English PDF |
| GB/T 11546.1-2008 |
Plastic - DeterminaTiOn of creep behaviour - Part 1: Tensile creep 塑料 蠕变性能的测定 第1部分：拉伸蠕变 |
China National Standards TiO |
English PDF |
| GB/T 1043.1-2008 |
Plastics - DeterminaTiOn of charpy impact properties - Part 1: Non - instrumented impact test 塑料 简支梁冲击性能的测定 第1部分：非仪器化冲击试验 |
China National Standards TiO |
English PDF |
| GB/T 1041-2008 |
Plastics - DeteminaTiOn of compressive properties 塑料 压缩性能的测定 |
China National Standards TiO |
English PDF |
| GB/T 1040.5-2008 |
Plastics - DeterminaTiOn of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 |
China National Standards TiO |
English PDF |
| GB/T 1034-2008 |
Plastics - DeterminaTiOn of water absorption 塑料 吸水性的测定 |
China National Standards TiO |
English PDF |
| GB/T 1033.1-2008 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titraTiOn method 塑料 非泡沫塑料密度的测定 第1部分：浸渍法、液体比重瓶法和滴定法 |
China National Standards TiO |
English PDF |
| GB/T 3898-2008 |
Magnetic compasses for sea navigaTiOn - Vocabulary 航海磁罗经术语 |
China National Standards TiO |
English PDF |
| GB/T 22241-2008 |
General specificaTiOn for water mist fire extinguishing system of ship 船用细水雾灭火系统通用技术条件 |
China National Standards TiO |
English PDF |
| GB/T 2030-2008 |
Bronze sucTiOn valve for seaward sluice 青铜吸入通海阀 |
China National Standards TiO |
English PDF |
| GB/T 2029-2008 |
Cast steel sucTiOn valve for seaward sluice 铸钢吸入通海阀 |
China National Standards TiO |
English PDF |
| GB/T 16304-2008 |
Test methods of the properties for piezoelectric ceramics - Test for relaTiOn between electric field and strain 压电陶瓷材料性能测试方法 电场应变特性的测试 |
China National Standards TiO |
English PDF |
| GB/T 12924-2008 |
Terminology for ship technology - Hull construcTiOn and installation technology 船舶工艺术语 船体建造和安装工艺 |
China National Standards TiO |
English PDF |
| GB/T 12777-2008 |
General specificaTiOn for metal bellows expansion joints 金属波纹管膨胀节通用技术条件 |
China National Standards TiO |
English PDF |
| GB/T 5505-2008 |
InspecTiOn of grain and oils - Determination of the ash content by incineration 粮油检验 灰分测定法 |
China National Standards TiO |
English PDF |
| GB/T 22294-2008 |
InspecTiOn of grain and oil - Determination of rice adhesive strength 粮油检验 大米胶稠度的测定 |
China National Standards TiO |
English PDF |
| GB/T 14490-2008 |
InspecTiOn of grain and oil - Determination gelatinization properties in cereal and starch by viscograph 粮油检验 谷物及淀粉糊化特性测定 粘度仪法 |
China National Standards TiO |
English PDF |
| GB/T 1413-2008 |
Series 1 freight containers - ClassificaTiOn, dimensions and ratings 系列1集装箱 分类、尺寸和额定质量 |
China National Standards TiO |
English PDF |
| GB/T 21461.1-2008 |
Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: DesignaTiOn system and basis for specifications 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 21460.1-2008 |
Plastics － Styrene-acrylonitrile (SAN) moulding and extrusion materials － Part 1: DesignaTiOn system and basis for specifications 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 20417.1-2008 |
Plastics － Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials － Part 1: DesignaTiOn system and basis for specifications 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 18964.1-2008 |
Plastics － Impact-resistant Polystyrene (PS-I) moulding and extrusion materials －Part 1: DesignaTiOn system and basis for specifications 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards TiO |
English PDF |
| GB/T 5918-2008 |
DeterminaTiOn of mixing homogeneity for feed products 饲料产品混合均匀度的测定 |
China National Standards TiO |
English PDF |
| Find out:31024Items | To Page of: First -Previous-Next -Last | [222] [223] [224] [225] [226] [227] [228] |
+86-755-25831330
