China National Standards

China Y GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Y" GB Standards English PDF List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 1543-2005 Paper and board-Determination of OpacitY(paper backing)-Diffuse reflectance method
    纸和纸板 不透明度(纸背衬)的测定(漫反射法)    		 China National Standards
    Y
    English PDF
    GB/T 19907-2005 Product of geographicl indication-Xiaoshan DehYdrated pickle-turnip
    地理标志产品 萧山萝卜干    		 China National Standards
    Y
    English PDF
    GB/T 19906-2005 Product of geographical indication-BaoYing lotus root
    地理标志产品 宝应荷(莲)藕    		 China National Standards
    Y
    English PDF
    GB/T 19909-2005 Product of geographical indication-Castanea henrYi(skan)Rehd.et wils Jianou
    地理标志产品 建瓯锥栗    		 China National Standards
    Y
    English PDF
    GB 13509-2005 Food additive XYlitol
    食品添加剂 木糖醇    		 China National Standards
    Y
    English PDF
    GB/T 7253-2005 Insulators for overhead lines with a nominal voltage above 1000V -- Ceramic or glass insulator units for a.c.sYstems -- Charateristics of insulator units of the cap and pin type
    标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性    		 China National Standards
    Y
    English PDF
    GB/T 5170.18-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humiditY cyclic testing equipments
    电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备    		 China National Standards
    Y
    English PDF
    GB/T 20043-2005 Field Acceptance Test to Determine the HYdraulic Performance of Hydraulic Turbine,storage pumps and pump-turbines
    水轮机、蓄能泵和水泵水轮机水力性能现场验收试验规程    		 China National Standards
    Y
    English PDF
    GB/T 20042.1-2005 Proton Exchange Membrane Fuel Cell -- TerminologY
    质子交换膜燃料电池 术语    		 China National Standards
    Y
    English PDF
    GB/T 17951-2005 Standard specification for magneticallY hard materials
    硬磁材料一般技术条件    		 China National Standards
    Y
    English PDF
    GB/T 7679.4-2005 Mining machinerY terminology Part 4:Mine hauling equipment
    矿山机械术语 第4部分：矿用运输设备    		 China National Standards
    Y
    English PDF
    GB/T 7679.3-2005 Mining machinerY terminology Part 3:Winding equipment
    矿山机械术语 第3部分：提升设备    		 China National Standards
    Y
    English PDF
    GB/T 7679.2-2005 Mining machinerY terminology Part 2:Loading cquipment
    矿山机械术语 第2部分：装载设备    		 China National Standards
    Y
    English PDF
    GB/T 7679.1-2005 Mining machinerY terminology Part 1:Mining cquipment
    矿山机械术语 第1部分：采掘设备    		 China National Standards
    Y
    English PDF
    GB/T 3871.11-2005 Agricultural tractors-Test procedures-Part 11:SuitabilitY tests for hot atmosphere
    农业拖拉机 试验规程 第11部分：高温性能试验    		 China National Standards
    Y
    English PDF
    GB/T 3452.3-2005 Housing dimensions for O-ring elastomer seals in hYdraulic and pneumatic applications
    液压气动用O形橡胶密封圈 沟槽尺寸    		 China National Standards
    Y
    English PDF
    GB/T 3216-2005 RotodYnamic pumps-Hdraulic peformance acceptance tests-Grades 1 and 2
    回转动力泵 水力性能验收试验 1级和2级    		 China National Standards
    Y
    English PDF
    GB/T 6826-2005 Serial tYpe of mineral processing equipment
    洗选设备 系列型谱    		 China National Standards
    Y
    English PDF
    GB/T 2353-2005 Dimension series and identification code for mounting flanges and shaft ends of hYdraulic pumps and motors
    液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号    		 China National Standards
    Y
    English PDF
    GB/T 19943-2005 Non-destructive testing-Radiographic examination of metallic materials bY X-and gamma-rays-Basic rules
    无损检测 金属材料X和伽玛射线 照相检测 基本规则    		 China National Standards
    Y
    English PDF
    GB/T 19939-2005 Technical Requirements for Crid Connection of PV SYstem
    光伏系统并网技术要求    		 China National Standards
    Y
    English PDF
    GB/T 19936.1-2005 Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrYing capacity of oils
    齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90    		 China National Standards
    Y
    English PDF
    GB/T 19935-2005 Worm gears-GeometrY of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser
    蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数    		 China National Standards
    Y
    English PDF
    GB/T 19934.1-2005 HYdraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method
    液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法    		 China National Standards
    Y
    English PDF
    GB/T 19932-2005 Earth-moving machinerY-Hydraulic excavators-Laboratory tests and performance requirements for operator protective guards
    土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求    		 China National Standards
    Y
    English PDF
    GB/T 19931-2005 Earth-moving machinerY-Trenchers-Definitions and commercial specifications
    土方机械 挖沟机 术语和商业规范    		 China National Standards
    Y
    English PDF
    GB/T 19930-2005 Earth-moving machinerY-Tip-Over Protection Structure(TOPS)for compact excavators-Laboratory tests and performance requirements
    土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求    		 China National Standards
    Y
    English PDF
    GB/T 19928-2005 Earth-moving machinerY-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom
    土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量    		 China National Standards
    Y
    English PDF
    GB/T 19926-2005 HYdraulic fluid power-Gas-loaded accumulators-Dimensions of gas port
    液压传动 充气式蓄能器 气口尺寸    		 China National Standards
    Y
    English PDF
    GB/T 19925-2005 HYdraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port
    液压传动 隔离式充气蓄能器 优先选择的液压油口    		 China National Standards
    Y
    English PDF
    GB/T 19924-2005 Mobile cranes-Determination of stabilitY
    流动式起重机 稳定性的确定    		 China National Standards
    Y
    English PDF
    GB/T 19922-2005 Standard test methods for measuring site flatness on silicon wafers bY noncontact scanning
    硅片局部平整度非接触式标准测试方法    		 China National Standards
    Y
    English PDF
    GB/T 1883.2-2005 Reciprocating internal combustion engines-VocabularY-Part 2:Terms for engine maintenance
    往复式内燃机 词汇 第2部分：发动机维修术语    		 China National Standards
    Y
    English PDF
    GB/T 1883.1-2005 Reciprocating internal combustion engines-VocabularY-Part 1:Terms for engine design and operation
    往复式内燃机 词汇 第1部分：发动机设计和运行术语    		 China National Standards
    Y
    English PDF
    GB/T 12965-2005 MonocrYstalline silicon as cut slices and lapped slices
    硅单晶切割片和研磨片    		 China National Standards
    Y
    English PDF
    GB/T 12962-2005 MonoccrYstalline silicon
    硅单晶    		 China National Standards
    Y
    English PDF
    GB/T 12604.2-2005 Non-destructive testing-TerminologY-Terms used in radiographic testing
    无损检测 术语 射线照相检测    		 China National Standards
    Y
    English PDF
    GB/T 12225-2005 General purpose industrial valves-Specification of copper alloY castings
    通用阀门 铜合金铸件技术条件    		 China National Standards
    Y
    English PDF
    GB/T 10913-2005 Earth-woving machinerY-Determination of ground speed
    土方机械 行驶速度测定    		 China National Standards
    Y
    English PDF
    GB/T 10857-2005 Steel roller chains,tYpes S and C,attachments and sprockets
    S型和C型钢制滚子链条，附件和链轮    		 China National Standards
    Y
    English PDF
    GB/T 10598.2-2005 Industrial test method of open-cut mine rotarY blast hole drill
    露天矿用牙轮钻机和旋转钻机 工业试验方法    		 China National Standards
    Y
    English PDF
    GB/T 10598.1-2005 Open-cut mine rotarY blast hole drill
    露天矿用牙轮钻机和旋转钻机    		 China National Standards
    Y
    English PDF
    GB/T 7985-2005 ConveYor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts
    输送带 织物芯输送带抗撕裂扩大性试验方法    		 China National Standards
    Y
    English PDF
    GB/T 5754.2-2005 Steel cord conveYor belt -- Longitudinal test -- Part 2: Measurement of tensile strength
    钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定    		 China National Standards
    Y
    English PDF
    GB/T 3515-2005 Rubber -- Determination of carbon black content -- PYrolytic method
    橡胶 炭黑含量的测定 热解法    		 China National Standards
    Y
    English PDF
    GB/T 3402.1-2005 Plastics HomopolYmer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations
    塑料 氯乙烯均聚和共聚树脂 第1部分：命名体系和规范基础    		 China National Standards
    Y
    English PDF
    GB/T 20024-2005 Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammabilitY
    内燃机用橡胶和塑料燃油软管 可燃性试验方法    		 China National Standards
    Y
    English PDF
    GB/T 20023-2005 Rubber and/or plastics hoses and hoses assemblies for airless paint spraYing
    无气喷涂用橡胶和/或塑料软管及软管组合件    		 China National Standards
    Y
    English PDF
    GB/T 20022-2005 Plastics -- HomopolYmer and Copolymer resins of vinyl chloride Determination of apparent density
    塑料 氯乙烯均聚和共聚树脂表观密度的测定    		 China National Standards
    Y
    English PDF
    GB/T 20021-2005 Heat resistant conveYor belts of duck construction
    帆布芯耐热输送带    		 China National Standards
    Y
    English PDF
    GB/T 1695-2005 Rubber,vulcanized -- Determination of electrical breakdown strength and voltage resistant at commercial power frequencY
    硫化橡胶 工频击穿电压强度和耐电压的测定方法    		 China National Standards
    Y
    English PDF
    GB/T 3903.13-2005 Footwear-Test methods for outsoles-Dimensional stabilitY
    鞋类-外底试验方法-尺寸稳定性    		 China National Standards
    Y
    English PDF
    GB/T 3903.10-2005 Footwear-Test methods for insoles-Dimensional stabilitY
    鞋类-内底试验方法-尺寸稳定性    		 China National Standards
    Y
    English PDF
    GB/T 19016-2005 QualitY management systems -- Guidelines for quality management in projects
    质量管理体系 项目质量管理指南    		 China National Standards
    Y
    English PDF
    GB 19891-2005 SafetY of machinery-Hygiene requirements for the design of machinery
    机械安全 机械设计的卫生要求    		 China National Standards
    Y
    English PDF
    GB/T 4791-2005 Graphical sYmbols for pipline accessory of ships
    船舶管路附件图形符号    		 China National Standards
    Y
    English PDF
    GB/T 19918-2005 Small craft-Graphical sYmbols
    小艇 图形符号    		 China National Standards
    Y
    English PDF
    GB/T 19912-2005 SafetY code for the rubber-tyred transtainer
    轮胎式集装箱门式起重机安全规程    		 China National Standards
    Y
    English PDF
    GB/T 19910-2005 Technical requirements for electronic control sYstem of motor-vehicles engine being overhauled
    汽车发动机电子控制系统修理技术要求    		 China National Standards
    Y
    English PDF
    GB/T 19904-2005 Electrochemical oxYgenmeter for medical hyperbaric oxygen chamber
    医用氧舱用电化学式测氧仪    		 China National Standards
    Y
    English PDF
    GB/T 12130-2005 Mediccal hYperbaric chamber pressurized with air
    医用空气加压氧舱    		 China National Standards
    Y
    English PDF
    GB 9193-2005 Acoustic,optical alarm signals and identifYing indications in ships
    船舶声光报警信号和识别标志    		 China National Standards
    Y
    English PDF
    GB 3445-2005 Indoor fire hYdrant
    室内消火栓    		 China National Standards
    Y
    English PDF
    GB 3033.2-2005 Ships and marine technologY-Identification colours for the content of piping systems-Part 2:Additional colours for different media and/or functions
    船舶与海上技术 管路系统内含物的识别颜色 第2部分：不同介质和(或)功能的附加颜色    		 China National Standards
    Y
    English PDF
    GB 3033.1-2005 Ships and marine technologY-Identification colours for the content of piping systems-Part 1:Main colours and media
    船舶与海上技术 管路系统内含物的识别颜色 第1部分：主颜色和介质    		 China National Standards
    Y
    English PDF
    GB 5226.4-2005 SafetY of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems
    机械安全 机械电气设备 第31部分：缝纫机、缝制单元和缝制系统的特殊安全和EMC要求    		 China National Standards
    Y
    English PDF
    GB 5226.3-2005 SefetY of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV
    机械安全 机械电气设备 第11部分：电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件    		 China National Standards
    Y
    English PDF
    GB/T 6148-2005 Test method for temperature-resistance coefficient of precision resistance alloYs
    精密电阻合金电阻温度系数测试方法    		 China National Standards
    Y
    English PDF
    GB/T 6147-2005 Test method for thermoelectric power of precision resistance alloYs
    精密电阻合金热电动势率 测试方法    		 China National Standards
    Y
    English PDF
    GB/T 4591-2005 Test Chart for Electrostatic CopYing Process
    静电图像测试版    		 China National Standards
    Y
    English PDF
    GB/T 19903.1-2005 Industrial automation sYstems and integration-Physical device control-Data model for computerized numerical controllers-Part 1:Overview and fundamental principles
    工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第1部分：概述和基本原理    		 China National Standards
    Y
    English PDF
    GB/T 19902.2-2005 Industrial automation sYstems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology
    工业自动化系统与集成--制造软件互操作性能力建规 第2部分：建规方法论    		 China National Standards
    Y
    English PDF
    GB/T 19902.1-2005 Industrial automation sYstems and integration-Manufacturing software capability profiling for interoperability-Part 1:Framework
    工业自动化系统与集成--制造软件互操作性能力建规 第1部分：框架    		 China National Standards
    Y
    English PDF
    GB/T 19899-2005 BinarY direct voltage signals for process Measurement and control systems
    过程测量和控制系统用二进制 直流电压信号    		 China National Standards
    Y
    English PDF
    GB/T 19897.4-2005 Automatic Meter Reading SYstem Lower Layer Communication Protocol Part 4:Data link layer using HDLC protocol
    自动抄表系统低层通信协议 第4部分：基于HDLC协议的链路层    		 China National Standards
    Y
    English PDF
    GB/T 19897.3-2005 Automatic Meter Reading SYstem Lower Layer Communication Protocol Part 3:Physical layer services and procedures for connection oriented asynchronous data exchange
    自动抄表系统低层通信协议 第3部分：面向连接的异步数据交换的物理层服务进程    		 China National Standards
    Y
    English PDF
    GB/T 19897.2-2005 Automatic Meter Reading SYstem Lower Layer Communication Protocol Part 2:Use of area networks on twisted pair with carrier signalling
    自动抄表系统低层通信协议 第2部分：基于双绞线载波信号的局域网使用    		 China National Standards
    Y
    English PDF
    GB/T 19897.1-2005 Automatic Meter Reading SYstem Lower Layer Communication Protocol Part 1:Direct local data exchange
    自动抄表系统低层通信协议 第1部分：直接本地数据交换    		 China National Standards
    Y
    English PDF
    GB/T 19896-2005 Degrees of projected image sharpness for 70,35and 16mm motion-picture projection sYstems
    70、35和16mm电影放映系统 画面清晰度等级    		 China National Standards
    Y
    English PDF
    GB/T 19893-2005 Digital color print sYstem
    数码彩色扩印系统    		 China National Standards
    Y
    English PDF
    GB/T 19892.1-2005 Batch control Part 1:Models and terminologY
    批控制 第1部分：模型和术语    		 China National Standards
    Y
    English PDF
    GB/T 19890-2005 Acoustics-High intensitY focused ultrasound(HIFU)measurements of acoustic power and field characteristics
    声学 高强度聚焦超声(HIFU)声功率和声场特性的测量    		 China National Standards
    Y
    English PDF
    GB/T 19889.6-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:LaboratorY measurements of impact sound insulation of floors
    声学 建筑和建筑构件隔声测量 第6部分：楼板撞击声隔声的实验室测量    		 China National Standards
    Y
    English PDF
    GB/T 19889.3-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:LaboratorY measurements of airborne sound insulation of building elements
    声学 建筑和建筑构件隔声测量 第3部分：建筑构件空气声隔声的实验室测量    		 China National Standards
    Y
    English PDF
    GB/T 19889.1-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 1:Requirements for laboratorY test facilities with suppressed flanking transmission
    声学 建筑和建筑构件隔声测量 第1部分：侧向传声受抑制的实验室测试 设施要求    		 China National Standards
    Y
    English PDF
    GB/T 19888.1-2005 Acoustics-StationarY audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantities
    声学 户外用固定式听觉报警器 第1部分：声发射量的现场测定    		 China National Standards
    Y
    English PDF
    GB/T 19886-2005 Acoustics-Guidelines for noise control bY enclosures and cabins
    声学 隔声罩和隔声间噪声控制指南    		 China National Standards
    Y
    English PDF
    GB/T 19885-2005 Acoustics-Determination of sound insulation performance of cabins-laborartorY and in situ measurements
    声学 隔声间的隔声性能测定 实验室和现场测量    		 China National Standards
    Y
    English PDF
    GB/T 19884-2005 Acoustics-In-situ determination of insertion loss of outdoor noise barriers of all tYpes
    声学 各种户外声屏障插入损失的现场测定    		 China National Standards
    Y
    English PDF
    GB/T 19882.1-2005 Automatic Meter Reading SYstem Part 1:General Principles
    自动抄表系统 第1部分：总则    		 China National Standards
    Y
    English PDF
    GB/T 18784.2-2005 Assurance method of CAD/CAM data qualitY
    CAD/CAM 数据质量保证方法    		 China National Standards
    Y
    English PDF
    GB/T 17213.9-2005 Industrial-process control valves Part 2-3:Flow capacitY-Test procedures
    工业过程控制阀 第2-3部分：流通能力 试验程序    		 China National Standards
    Y
    English PDF
    GB/T 17213.3-2005 Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-waY,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves
    工业过程控制阀 第3-1部分：尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距    		 China National Standards
    Y
    English PDF
    GB/T 17213.2-2005 Industrial-process control valves Part 2-1:Flow capacitY Sizing equations for fluid flow under Installed conditions
    工业过程控制阀 第2-1部分：流通能力 安装条件下流体流量的计算公式    		 China National Standards
    Y
    English PDF
    GB/T 17213.16-2005 Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated bY hydrodynamic flow
    工业过程控制阀 第8-4部分：噪声的考虑 液动流流经控制阀产生的噪声预测方法    		 China National Standards
    Y
    English PDF
    GB/T 17213.15-2005 Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodYnamic noise prediction method
    工业过程控制阀 第8-3部分：噪声的考虑 空气动力流流经控制阀产生的噪声预测方法    		 China National Standards
    Y
    English PDF
    GB/T 17213.14-2005 Industrial-process control valves Part 8-2:Noise considerations-LaboratorY of noise generated by hydrodynamic flow through control valves
    工业过程控制阀 第8-2部分：噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声    		 China National Standards
    Y
    English PDF
    GB/T 17213.13-2005 Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotarY actuators
    工业过程控制阀 第6-2部分：定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装    		 China National Standards
    Y
    English PDF
    GB/T 17213.12-2005 Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-waY,globe-type,straight pattern control valves
    工业过程控制阀 第3-3部分：尺寸 对焊式两通球形直通控制阀的端距    		 China National Standards
    Y
    English PDF
    GB/T 17213.11-2005 Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotarY control valves except butterfly valves
    工业过程控制阀 第3-2部分：尺寸 角行程控制阀(蝶阀除外)的端面距    		 China National Standards
    Y
    English PDF

    Find out:32308Items   |  To Page of: First -Previous-Next -Last  | [269] [270] [271] [272] [273] [274] [275]

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.rjs.cn
    China Licenses
    www.transcustoms.com
    China HS code & Tariff
    www.gbstandards.org
    China National Standards