GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 1596-2005 |
Fly ash used for cement and concrete 用于水泥和混凝土中的粉煤灰 |
China National Standards a |
English PDF |
GB/T 12957-2005 |
Test method for activity of industrial waste slag used as addition to cement 用于水泥混合材的工业废渣活性试验方法 |
China National Standards a |
English PDF |
GB/T 11982.1-2005 |
Polyvinyl chloride floor sheets Part 1:Polyvinyl chloride floor sheets with backing 聚氯乙烯卷材地板 第1部分:带基材的聚氯乙烯卷材地板 |
China National Standards a |
English PDF |
GB/T 5321-2005 |
Measurement of loss and efficiency for electrical machine by the calorimetric method 量热法测定电机的损耗和效率 |
China National Standards a |
English PDF |
GB/T 19657-2005 |
Heat test source(H.T.S)lamps for carrying out heating tests on luminaires 灯具加热试验用热试验源灯 |
China National Standards a |
English PDF |
GB/T 19656-2005 |
DC supplied electronic ballasts for tubular fluorescent lamps--Performance requirements 管形荧光灯用直流电子镇流器 性能要求 |
China National Standards a |
English PDF |
GB/T 19655-2005 |
auxiliaries for lamps--Starting devices(other than glow starters)Performance requirements 灯用附件 启动装置(辉光启动器除外)性能要求 |
China National Standards a |
English PDF |
GB/T 19654-2005 |
auxiliaries for lamps--D.C.or A.C.supplied electronic step-down convertors for filament lamps Performance requirements 灯用附件 钨丝灯用直流/交流电子降压转换器 性能要求 |
China National Standards a |
English PDF |
GB/T 19637-2005 |
Electrical accessories-cable reels for household and similar purposes 电器附件--家用和类似用途电缆卷盘 |
China National Standards a |
English PDF |
GB/T 18496.2-2005 |
Electromechanical switches for use in electronic equipment Part 4-1:Sectional specification for lever(toggle)switches Blank detail specification 电子设备用机电开关 第4-1部分:钮子(倒扳)开关 空白详细规范 |
China National Standards a |
English PDF |
GB/T 14094-2005 |
Tungsten halogen lamps(non-vehicle)Performance requirements 卤钨灯(非机动车辆用)性能要求 |
China National Standards a |
English PDF |
GB/T 13259-2005 |
High Pressure Sodium Lamps 高压钠灯 |
China National Standards a |
English PDF |
GB 7000.7-2005 |
Safety requirements for floodlights 投光灯具安全要求 |
China National Standards a |
English PDF |
GB 7000.19-2005 |
Safety requirements for photo and film luminaires(non-professional) 照相和电影用灯具(非专业用)安全要求 |
China National Standards a |
English PDF |
GB 4706.79-2005 |
Safety of household and similar electrical appliances Part 2:Particular requirements for hand-held mains-operated garden blowers,vacuums and blower vacuums 家用和类似用途电器的安全 第二部分:手持式电动园艺用吹屑机、吸屑机及吹吸两用机的特殊要求 |
China National Standards a |
English PDF |
GB 4706.78-2005 |
Safety of household and similar electrical appliances Part2:Particular requirements for pedestrian controlled mains-operated lawnmowers 家用和类似用途电器的安全 第二部分:步行控制的电动割草机的特殊要求 |
China National Standards a |
English PDF |
GB 19653-2005 |
Installation rule for neon tubes 霓虹灯安装规范 |
China National Standards a |
English PDF |
GB 19652-2005 |
Discharge lamps(excluding fluorescent lamps)--Safety specifications 放电灯 (荧光灯除外)安全要求 |
China National Standards a |
English PDF |
GB 19636-2005 |
Saw tables for use as saw benches Tables for hand-held circular saws with a maximum saw-blade diameter of 315mm Safety requirements 用作圆锯台架的锯台 最大锯片直径为315 mm的手持式圆锯的锯台 安全要求 |
China National Standards a |
English PDF |
GB 19510.7-2005 |
Lamp controlgear--Part 7:Particular requirements for d.c.supplied electronic ballasts for aircraft lighting 灯的控制装置 第7部分:航空器照明用直流电子镇流器的特殊要求 |
China National Standards a |
English PDF |
GB 19510.6-2005 |
Lamp controlgear--Part 6:Particular requirements for d.c.supplied electronic ballasts for public transport lighting 灯的控制装置 第6部分:公共交通运输工具照明用直流电子镇流器的特殊要求 |
China National Standards a |
English PDF |
GB 19510.5-2005 |
Lamp controlgear--Part 5:Particular requirements for d.c.supplied electronic ballasts for general lighting 灯的控制装置 第5部分:普通照明用直流电子镇流器的特殊要求 |
China National Standards a |
English PDF |
GB 19510.12-2005 |
Lamp controlgear--Part 12:Particular requirements for miscellaneous electronic circuits used with luminaires 灯的控制装置 第12部分:与灯具联用的杂类电子线路的特殊要求 |
China National Standards a |
English PDF |
GB 13960.13-2005 |
Safety of transportable motor-operated electric tool-Part2:Particular requirements for combined mitre-bench saws 可移式电动工具的安全 第二部分:斜切割台式组合锯的专用要求 |
China National Standards a |
English PDF |
GB/T 2423.54-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination 电工电子产品环境试验 第2部分:试验方法 试验Xc:流体污染 |
China National Standards a |
English PDF |
GB/T 2423.53-2005 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损 |
China National Standards a |
English PDF |
GB/T 19629-2005 |
Medical Electrical Equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging 医用电气设备 X射线诊断影像中使用的电离室和(或)半导体探测器剂量计 |
China National Standards a |
English PDF |
GB/T 19628.2-2005 |
Industrial wire screens woven wire cloth-Guide to the choice of aperture size and wire diameter combinations-Part 2:Preferred combination for woven wire cloth 工业用金属丝 网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 金属丝编织网的优先组合选择 |
China National Standards a |
English PDF |
GB/T 19627-2005 |
Particle size analysis-Photon correlation spectroscopy 粒度分析--光子相关光谱法 |
China National Standards a |
English PDF |
GB/T 1048-2005 |
Pipework components-Definition and selection of PN 管道元件--PN(公称压力)的定义和选用 |
China National Standards a |
English PDF |
GB/T 1047-2005 |
Pipework components-Definition and selection of DN (norminal size) 管道元件 DN(公称尺寸)的定义和选用 |
China National Standards a |
English PDF |
GB/T 19626-2005 |
General technical requirements of DNA Anti-counterfeit technical products DNA防伪技术产品通用技术要求 |
China National Standards a |
English PDF |
GB 50121-2005 |
Standard for assessment of building sound insulation 建筑隔声评价标准 |
China National Standards a |
English PDF |
GB/T 15000.9-2004 |
Directives for the work of reference materials(9)--Calibration in analytical chemistry and use of certified reference materials 标准样品工作导则(9) 分析化学中的校准和有证标准样品的使用 |
China National Standards a |
English PDF |
GB/T 19623-2004 |
Labor force quota for signaling engineering in city transit system 城市轨道交通通信信号工程劳动定员定额 |
China National Standards a |
English PDF |
GB/T 19622-2004 |
Labor force quota for subway engineering in city transit system 城市轨道交通地下铁道工程劳动定员定额 |
China National Standards a |
English PDF |
GB/T 19621-2004 |
Labor force quota for lightrail engineering in city transit system 城市轨道交通轻轨工程劳动定员定额 |
China National Standards a |
English PDF |
GB/T 19620-2004 |
Labor force quota for locomotive power supply engineering in city transit system 城市轨道交通电力牵引供电工程 劳动定员定额 |
China National Standards a |
English PDF |
GB/T 19619-2004 |
Terminology for nanomaterials 纳米材料术语 |
China National Standards a |
English PDF |
GB 19615-2004 |
Pollutants content limitation in soil for destruction of chemical weapons abandoned by Japan in China 销毁日本遗弃在华化学武器 环境土壤中污染物含量标准(试行) |
China National Standards a |
English PDF |
GB 19614-2004 |
Concentration limitations of pollutants in ground water for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 地下水中污染物浓度标准(试行) |
China National Standards a |
English PDF |
GB 19613-2004 |
Concentration limitations of pollutants in surface water for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 地表水中污染物浓度标准(试行) |
China National Standards a |
English PDF |
GB 19612-2004 |
Concentrationlimitation of air pollutants for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 环境空气中污染物浓度标准(试行) |
China National Standards a |
English PDF |
GB/T 5606.1-2004 |
Cigarettes--Part 1:Sampling 卷烟 第1部分:抽样 |
China National Standards a |
English PDF |
GB/T 19616-2004 |
Tobacco--Sampling of batches of raw material--General principles 烟草成批原料取样的一般原则 |
China National Standards a |
English PDF |
GB/T 19611-2004 |
Tobacco and tobaccoproducts--Determination of maleic hydrazide residues UV Spectrophotometer method 烟草及烟草制品 抑芽丹残留量的测定 紫外分光光度法 |
China National Standards a |
English PDF |
GB/T 19609-2004 |
Cigarette--Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine 卷烟 用常规分析用吸烟机测定 总粒相物和焦油 |
China National Standards a |
English PDF |
GB/T 16450-2004 |
Routine analytical cigarette-smokingmachine-Definitions and standard conditions 常规分析用吸烟机 定义和标准条件 |
China National Standards a |
English PDF |
GB/T 16447-2004 |
Tobacco and tobacco products--Atmosphere for conditioning and testing 烟草及烟草制品 调节和测试的大气环境 |
China National Standards a |
English PDF |
GB/T 13596-2004 |
Tobacco and tobaccoproducts--Determination of organochlorine pesticide residues--Gas chromatographic method 烟草和烟草制品 有机氯农药残留量的测定 气相色谱法 |
China National Standards a |
English PDF |
GB/T 13595-2004 |
Tobacco and tobacco products--Determination of pyrethroids,organophosphorus and nitrogen-containing pesticides residues 烟草及烟草制品 拟除虫菊酯杀虫剂、有机磷杀虫剂、含氮农药残留量的测定 |
China National Standards a |
English PDF |
GB 19606-2004 |
Noise limit value for household and similarelectrical appliances 家用和类似用途电器噪声限值 |
China National Standards a |
English PDF |
GB/T 19608.3-2004 |
Classification of specific environmental condition--Part 3:Plateau 特殊环境条件分级 第3部分:高原 |
China National Standards a |
English PDF |
GB/T 19608.2-2004 |
Classification of specific environmental condition--Part 2:Dry heat-desert 特殊环境条件分级 第2部分:干热沙漠 |
China National Standards a |
English PDF |
GB/T 19608.1-2004 |
Classification of specific environmental condition--Part 1:Dry heat 特殊环境条件分级 第1部分:干热 |
China National Standards a |
English PDF |
GB/T 19607-2004 |
Protection types of specific environmental condition and their symbols 特殊环境条件防护类型及代号 |
China National Standards a |
English PDF |
GB 16895.22-2004 |
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation,switching and control--Section 534:Devices for protection against overvoltages 建筑物电气装置 第5-53部分:电气设备的选择和安装-隔离、开关和控制设备 第534节:过电压保护电器 |
China National Standards a |
English PDF |
GB/T 19624-2004 |
Safety assessment for in-service pressure vessels containing defects 在用含缺陷压力容器安全评定 |
China National Standards a |
English PDF |
GB 12686-2004 |
Glyphosate technical 草甘膦原药 |
China National Standards a |
English PDF |
GB 19605-2004 |
Chlorpyrifos emulsifiable concentrates 毒死蜱乳油 |
China National Standards a |
English PDF |
GB 19604-2004 |
Chlorpyrifos technical 毒死蜱原药 |
China National Standards a |
English PDF |
GB/T 7725-2004 |
Room air conditioners 房间空气调节器 |
China National Standards a |
English PDF |
GB/T 19603-2004 |
Test method for drop-proof properties ofdrop-proof plastic films 塑料无滴薄膜无滴性能试验方法 |
China National Standards a |
English PDF |
GB 15066-2004 |
Stainless steel pressure cooker 不锈钢压力锅 |
China National Standards a |
English PDF |
GB/T 19602-2004 |
1,1-Difluoroethane for industrial use(HFC-152a) 工业用1,1-二氟乙烷(HFC-152a) |
China National Standards a |
English PDF |
GB 6819-2004 |
Dissolved acetylene 溶解乙炔 |
China National Standards a |
English PDF |
GB 10665-2004 |
Calcium carbide 碳化钙(电石) |
China National Standards a |
English PDF |
GB/T 7235-2004 |
Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量 |
China National Standards a |
English PDF |
GB/T 7234-2004 |
Geometrical Product Specifications(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数 |
China National Standards a |
English PDF |
GB/T 7220-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards a |
English PDF |
GB/T 5847-2004 |
Dimensional chain--Methods of calculation 尺寸链 计算方法 |
China National Standards a |
English PDF |
GB/T 5371-2004 |
Limits and fits--The calculation and selection of interference fits 极限与配合 过盈配合的计算和选用 |
China National Standards a |
English PDF |
GB/T 4380-2004 |
assessment of departure from roundness--Two-and three-point methods 圆度误差的评定 两点、三点法 |
China National Standards a |
English PDF |
GB/T 19600-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards a |
English PDF |
GB/T 1958-2004 |
Geometrical Product Specifications(GPS)--Geometrical tolerance--Verification prescription 产品几何量技术规范(GPS) 形状和位置公差 检测规定 |
China National Standards a |
English PDF |
GB/T 19067.2-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Measurement standards--Part 2:Software measurement standards 产品几何量技术规范(GPS) 表面结构 轮廓法测量标准 第2部分:软件测量标准 |
China National Standards a |
English PDF |
GB/T 18779.2-2004 |
Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南 |
China National Standards a |
English PDF |
GB/T 16857.5-2004 |
Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 |
China National Standards a |
English PDF |
GB/T 11337-2004 |
Measurement of departures from flatness 平面度误差检测 |
China National Standards a |
English PDF |
GB/T 11336-2004 |
Measurement of departures from straightness 直线度误差检测 |
China National Standards a |
English PDF |
GB/T 6965-2004 |
Testing basic terms of materials for fishing gear--Pretension 渔具材料试验基本条件 预加张力 |
China National Standards a |
English PDF |
GB/T 3939.5-2004 |
Nomenclature and signs of main fishing gear material--Sinker 主要渔具材料命名与标记 沉子 |
China National Standards a |
English PDF |
GB/T 3939.4-2004 |
Nomenclature and signs of main fishing gear material--Float 主要渔具材料命名与标记 浮子 |
China National Standards a |
English PDF |
GB/T 3939.3-2004 |
Nomenclature and signs of main fishing gear material--Rope 主要渔具材料命名与标记 绳索 |
China National Standards a |
English PDF |
GB/T 3939.2-2004 |
Nomenclature and signs of main fishing gear material--Netting 主要渔具材料命名与标记 网片 |
China National Standards a |
English PDF |
GB/T 3939.1-2004 |
Nomenclature and signs of main fishing gear material--Netting twine 主要渔具材料命名与标记 网线 |
China National Standards a |
English PDF |
GB/T 19597-2004 |
Safety requirements for decommissioning of nuclear facilities 核设施退役安全要求 |
China National Standards a |
English PDF |
GB 11806-2004 |
Regulations for the safe transport of radioactive material 放射性物质安全运输规程 |
China National Standards a |
English PDF |
GB 19595-2004 |
Fireworks and firecracker--Fuse 烟花爆竹 引火线 |
China National Standards a |
English PDF |
GB 19594-2004 |
Fireworks and firecracker--Aerial shell 烟花爆竹 礼花弹 |
China National Standards a |
English PDF |
GB 19593-2004 |
Fireworks and firecracker--Combination fireworks 烟花爆竹 组合烟花 |
China National Standards a |
English PDF |
GB 19592-2004 |
Detergent additive for vehicular gasoline 车用汽油清净剂 |
China National Standards a |
English PDF |
GB 50348-2004 |
technical code for engineering of security and protection system 安全防范工程技术规范 |
China National Standards a |
English PDF |
GB/T 19591-2004 |
Nano-titanium dioxide 纳米二氧化钛 |
China National Standards a |
English PDF |
GB/T 19589-2004 |
Nano-Zinc oxide 纳米氧化锌 |
China National Standards a |
English PDF |
GB/T 19588-2004 |
Nano-Nickel powder 纳米镍粉 |
China National Standards a |
English PDF |
GB/T 19587-2004 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards a |
English PDF |
GB/T 13221-2004 |
Nanometer powder--Determination of particle size distribution--Small angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards a |
English PDF |
GB 15760-2004 |
Metal-cutting machine tools--General safeguarding specification 金属切削机床 安全防护通用技术条件 |
China National Standards a |
English PDF |
GB/T 18240.4-2004 |
Fiscal cash register--Part 4:Specification of device with EFT function 税控收款机 第4部分:银行卡受理设备规范 |
China National Standards a |
English PDF |
Find out:54969Items | To Page of: First -Previous-Next -Last | [465] [466] [467] [468] [469] [470] [471] |