GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 39424.1-2020 |
Road vehicles—Traffic accident analysis—Part 1: Vocabulary 道路车辆 交通事故分析 第1部分:术语 |
China National Standards al |
English PDF |
GB/T 39423-2020 |
Road vehicles—Collection of accident data for evaluation of occupant restraint performance 道路车辆 评价乘员约束性能的事故数据收集 |
China National Standards al |
English PDF |
GB/T 39422-2020 |
Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards al |
English PDF |
GB/T 39417-2020 |
Health management of large-scale amusement device 大型游乐设施健康管理 |
China National Standards al |
English PDF |
GB/T 39414.4-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 4: Open service signal B3I 北斗卫星导航系统空间信号接口规范 第4部分:公开服务信号B3I |
China National Standards al |
English PDF |
GB/T 39414.3-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 3: Open service signal B1I 北斗卫星导航系统空间信号接口规范 第3部分:公开服务信号B1I |
China National Standards al |
English PDF |
GB/T 39414.2-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 2: Open service signal B2a 北斗卫星导航系统空间信号接口规范 第2部分:公开服务信号B2a |
China National Standards al |
English PDF |
GB/T 39414.1-2020 |
Interface specification for signal in space of Beidou navigation satellite system—Part 1: Open service signal B1C 北斗卫星导航系统空间信号接口规范 第1部分:公开服务信号B1C |
China National Standards al |
English PDF |
GB/T 39413-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal simulator 北斗卫星导航系统信号模拟器性能要求及测试方法 |
China National Standards al |
English PDF |
GB/T 39411-2020 |
Technical requirements of BeiDou satellite common-view time transfer 北斗卫星共视时间传递技术要求 |
China National Standards al |
English PDF |
GB/T 39410-2020 |
General specification for GNSS geodetic receivers onboard low earth orbit satellite 低轨星载GNSS测量型接收机通用规范 |
China National Standards al |
English PDF |
GB/T 39408-2020 |
Electronic jetting dispenser robot system—General specifications 电子喷胶机器人系统 通用技术条件 |
China National Standards al |
English PDF |
GB/T 39407-2020 |
Grinding and polishing robot system—General specification 研磨抛光机器人系统 通用技术条件 |
China National Standards al |
English PDF |
GB/T 39406-2020 |
Specification of XML exchange of PLC-based software development platform for industrial robots 工业机器人可编程控制器软件开发平台程序的XML交互规范 |
China National Standards al |
English PDF |
GB/T 39404-2020 |
Information security general requirement for control unit of industrial robot 工业机器人控制单元的信息安全通用要求 |
China National Standards al |
English PDF |
GB/T 39402-2020 |
Design specification of collaborative industrial robot 面向人机协作的工业机器人设计规范 |
China National Standards al |
English PDF |
GB/T 39401-2020 |
The data exchange of cloud service platform for industrial robot 工业机器人云服务平台数据交换 |
China National Standards al |
English PDF |
GB/T 39400-2020 |
Industrial data quality—General technical specification 工业数据质量 通用技术规范 |
China National Standards al |
English PDF |
GB/T 39399-2020 |
General specification for BeiDou navigation satellite system geodetic receiver 北斗卫星导航系统测量型接收机通用规范 |
China National Standards al |
English PDF |
GB/T 39398-2020 |
Monitoring and assessment parameters of international GNSS monitoring and assessment system (iGMAS) 全球连续监测评估系统(iGMAS)监测评估参数 |
China National Standards al |
English PDF |
GB/T 39397.2-2020 |
File format of international GNSS monitoring and assessment system (iGMAS)—Part 2: Products 全球连续监测评估系统(iGMAS)文件格式 第2部分:产品 |
China National Standards al |
English PDF |
GB/T 39397.1-2020 |
File format of international GNSS monitoring and assessment system (iGMAS)—Part 1: Observation data 全球连续监测评估系统(iGMAS)文件格式 第1部分:观测数据 |
China National Standards al |
English PDF |
GB/T 39396.2-2020 |
Quality requirements for international GNSS monitoring and assessment system (iGMAS)—Part 2: Products 全球连续监测评估系统(iGMAS)质量要求 第2部分:产品 |
China National Standards al |
English PDF |
GB/T 39396.1-2020 |
Quality requirements for international GNSS monitoring and assessment system (iGMAS)—Part 1: Observation data 全球连续监测评估系统(iGMAS)质量要求 第1部分:观测数据 |
China National Standards al |
English PDF |
GB/T 39393-2020 |
Technical specification of intelligent controller unit for household appliances 家用电器专用智能控制单元技术规范 |
China National Standards al |
English PDF |
GB/T 39392-2020 |
Technical specification of intelligent power module for household appliances 家用电器专用智能功率模块技术规范 |
China National Standards al |
English PDF |
GB/T 39472-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal record and playback devices 北斗卫星导航系统信号采集回放仪性能要求及测试方法 |
China National Standards al |
English PDF |
GB/T 39334.5-2020 |
Digital simulation of mechanical products manufacturing process—Part 5: Requirements of typical process simulation 机械产品制造过程数字化仿真 第5部分:典型工艺仿真要求 |
China National Standards al |
English PDF |
GB/T 39334.4-2020 |
Digital simulation of mechanical products manufacturing process—Part 4: Requirements of NC machining process simulation 机械产品制造过程数字化仿真 第4部分:数控加工过程仿真要求 |
China National Standards al |
English PDF |
GB/T 39334.3-2020 |
Digital simulation of mechanical products manufacturing process—Part 3: Requirements of assembly workshop logistics simulation 机械产品制造过程数字化仿真 第3部分:装配车间物流仿真要求 |
China National Standards al |
English PDF |
GB/T 39334.2-2020 |
Digital simulation of mechanical products manufacturing process—Part 2: Requirements of production line planning and layout simulation 机械产品制造过程数字化仿真 第2部分:生产线规划和布局仿真要求 |
China National Standards al |
English PDF |
GB/T 39334.1-2020 |
Digital simulation of mechanical products manufacturing process—Part 1: General requirements 机械产品制造过程数字化仿真 第1部分:通用要求 |
China National Standards al |
English PDF |
GB/T 39259-2020 |
Green manufacturing—Green supply chain management in manufacturing enterprises—Requirements for bill of material 绿色制造 制造企业绿色供应链管理 物料清单要求 |
China National Standards al |
English PDF |
GB/T 39228-2020 |
Determination of soil microbial biomass—Fumigation-extraction method 土壤微生物生物量的测定 熏蒸提取法 |
China National Standards al |
English PDF |
GB/T 35381.14-2020 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 14:Sequence control 农林拖拉机和机械 串行控制和通信数据网络 第14部分:顺序控制 |
China National Standards al |
English PDF |
GB/T 35381.12-2020 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 12:Diagnostics services 农林拖拉机和机械 串行控制和通信数据网络 第12部分:诊断服务 |
China National Standards al |
English PDF |
GB/T 39381.1-2020 |
Cardiovascular implants—Vascular device-drug combination products—Part 1:General requirements 心血管植入物 血管药械组合产品 第1部分:通用要求 |
China National Standards al |
English PDF |
GB/T 29790-2020 |
Point-of-care testing(POCT)—Requirements for quality and competence 即时检验 质量和能力的要求 |
China National Standards al |
English PDF |
GB/T 19703-2020 |
In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求 |
China National Standards al |
English PDF |
GB/T 39495-2020 |
Metallic and other inorganic coatings—Chromate-free chemical conversion coatings on allumion and its alloys 金属及其他无机覆盖层 铝及铝合金无铬化学转化膜 |
China National Standards al |
English PDF |
GB/T 39494-2020 |
Determination for coating adhesion of rare earth permanent magnetic materials for drive motor of new energy vehicle 新能源汽车驱动电机用稀土永磁材料表面涂镀层结合力的测定 |
China National Standards al |
English PDF |
GB/T 39491-2020 |
General technical requirements of carbon fiber composites covering parts for automobiles 汽车用碳纤维复合材料覆盖部件通用技术要求 |
China National Standards al |
English PDF |
GB/T 39489-2020 |
Technical specification for the total tailings paste backfill 全尾砂膏体充填技术规范 |
China National Standards al |
English PDF |
GB/T 39487-2020 |
Test method of tube shear strength for structural foaming adhesives 发泡结构胶粘剂管剪强度试验方法 |
China National Standards al |
English PDF |
GB/T 39486-2020 |
Chemical reagent—General rules for inductively coupled plasma mass spectrometry 化学试剂 电感耦合等离子体质谱分析方法通则 |
China National Standards al |
English PDF |
GB/T 39485-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Manual gas valves 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 手动燃气阀 |
China National Standards al |
English PDF |
GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验(C-ELS)和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards al |
English PDF |
GB/T 39483.1-2020 |
Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分:机械和电气接口 |
China National Standards al |
English PDF |
GB/T 39482.3-2020 |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens—Part 3: Processing and analysis of data from dummy cells 涂漆和未涂漆金属试样的电化学阻抗谱(EIS) 第3部分:从模拟电解池获得数据的处理和分析 |
China National Standards al |
English PDF |
GB/T 39308-2020 |
Technical specification for refractory organic wastewater advanced treatment 难降解有机废水深度处理技术规范 |
China National Standards al |
English PDF |
GB/T 39306-2020 |
Reclaimed water quality—Determination of total arsenic—Atomic fluorescence spectrometry 再生水水质 总砷的测定 原子荧光光谱法 |
China National Standards al |
English PDF |
GB/T 39305-2020 |
Reclaimed water quality—Determination of fluoride,chloride,nitrite,nitrate,sulfate—Ion chromatography 再生水水质 氟、氯、亚硝酸根、硝酸根、硫酸根的测定 离子色谱法 |
China National Standards al |
English PDF |
GB/T 39304-2020 |
General technical specification for sample pre-treatment of biological toxicity detection in reclaimed water 再生水生物毒性检测的样品前处理通用技术规范 |
China National Standards al |
English PDF |
GB/T 39303-2020 |
General technical specification for pre-treatment of microorganism samples in wastewater treatment system 废水处理系统微生物样品前处理通用技术规范 |
China National Standards al |
English PDF |
GB/T 39302-2020 |
Reclaimed water quality—Determination of anionic surfactants—Methylene blue spectrophotometric method 再生水水质 阴离子表面活性剂的测定 亚甲蓝分光光度法 |
China National Standards al |
English PDF |
GB/T 39301-2020 |
Disposal method for electroplating sludge reduction 电镀污泥减量化处置方法 |
China National Standards al |
English PDF |
GB/T 39300-2020 |
Treatment and disposal method for chromium-containing electroplating sludge 含铬电镀污泥处理处置方法 |
China National Standards al |
English PDF |
GB/T 39298-2020 |
Reclaimed water quality—Determination of benzene homologues—Gas chromatography 再生水水质 苯系物的测定 气相色谱法 |
China National Standards al |
English PDF |
GB/T 39296-2020 |
Operation effect evaluation of recirculating cooling water treatment—Method of monitoring heat exchanger 循环冷却水处理运行效果评价 监测换热器法 |
China National Standards al |
English PDF |
GB/T 39292-2020 |
Method of sampling and sample preparation for analysis of palladium carbon wastes 废钯炭分析用取样和制样方法 |
China National Standards al |
English PDF |
GB/T 39289-2020 |
Determination of the adhesion strength—Plastic and metal 胶粘剂粘接强度的测定 金属与塑料 |
China National Standards al |
English PDF |
GB/T 39288-2020 |
Thermal storage device with electrical input and thermal output 蓄热型电加热装置 |
China National Standards al |
English PDF |
GB/T 39285-2020 |
Method for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography 钯化合物分析方法 氯含量的测定 离子色谱法 |
China National Standards al |
English PDF |
GB/T 39284-2020 |
Treatment and disposal method for filter sludge from magnesium sulfate production process 硫酸镁生产滤泥的处理处置方法 |
China National Standards al |
English PDF |
GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件 规范 |
China National Standards al |
English PDF |
GB/T 39233-2020 |
Lanthanum-copper alloys 镧铜合金 |
China National Standards al |
English PDF |
GB/T 39188-2020 |
General technical specification of electric windows and doors (gates) 电动门窗通用技术要求 |
China National Standards al |
English PDF |
GB/T 39159-2020 |
High purity copper alloy target for integrated circuit 集成电路用高纯铜合金靶材 |
China National Standards al |
English PDF |
GB/T 39156-2020 |
Technical requirements and test methods for large format ceramic slab 大规格陶瓷板技术要求及试验方法 |
China National Standards al |
English PDF |
GB/T 37363.4-2020 |
Determination of biocides content of coating materials—Part 4: Determination of carbendazim content 涂料中生物杀伤剂含量的测定 第4部分:多菌灵含量的测定 |
China National Standards al |
English PDF |
GB/T 37363.3-2020 |
Determination of biocides content of coating materials—Part 3:Determination of triclosan content 涂料中生物杀伤剂含量的测定 第3部分:三氯生含量的测定 |
China National Standards al |
English PDF |
GB/T 35465.6-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分:胶粘剂拉伸剪切疲劳 |
China National Standards al |
English PDF |
GB/T 35465.5-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分:弯曲疲劳 |
China National Standards al |
English PDF |
GB/T 35465.4-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分:拉-压和压-压疲劳 |
China National Standards al |
English PDF |
GB/T 28125.2-2020 |
Gas analysis—Determination of hazardous materials in air separation process—Part 2:Determination of mineral oil 气体分析 空分工艺中危险物质的测定 第2部分:矿物油的测定 |
China National Standards al |
English PDF |
GB/T 26548.7-2020 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears 手持便携式动力工具 振动试验方法 第7部分:冲剪机和剪刀 |
China National Standards al |
English PDF |
GB/T 24982-2020 |
Garnet aluminate series of rare earth phosphors for white LED 白光LED用石榴石结构铝酸盐系列荧光粉 |
China National Standards al |
English PDF |
GB/T 23937-2020 |
Sodium hydrosulfide for industrial use 工业硫氢化钠 |
China National Standards al |
English PDF |
GB/T 23514-2020 |
Methods for chemical analysis of nuclear-grade Ag-In-Cd alloys 核级银-铟-镉合金化学分析方法 |
China National Standards al |
English PDF |
GB/T 20975.8-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 8:Determination of zinc content 铝及铝合金化学分析方法 第8部分:锌含量的测定 |
China National Standards al |
English PDF |
GB/T 20975.34-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 34:Determination of sodium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第34部分:钠含量的测定 火焰原子吸收光谱法 |
China National Standards al |
English PDF |
GB/T 20975.33-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 33:Determination of potassium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第33部分:钾含量的测定 火焰原子吸收光谱法 |
China National Standards al |
English PDF |
GB/T 20975.32-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 32:Determination of bismuth content 铝及铝合金化学分析方法 第32部分:铋含量的测定 |
China National Standards al |
English PDF |
GB/T 20975.20-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 20:Determination of gallium content—Butyrhodamine B spectrophotometric method 铝及铝合金化学分析方法 第20部分:镓含量的测定 丁基罗丹明B分光光度法 |
China National Standards al |
English PDF |
GB/T 20975.19-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 19:Determination of zirconium content 铝及铝合金化学分析方法 第19部分:锆含量的测定 |
China National Standards al |
English PDF |
GB/T 20975.15-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 15:Determination of boron content 铝及铝合金化学分析方法 第15部分:硼含量的测定 |
China National Standards al |
English PDF |
GB/T 20975.13-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 13:Determination of vanadium content 铝及铝合金化学分析方法 第13部分:钒含量的测定 |
China National Standards al |
English PDF |
GB/T 20892-2020 |
Praseodymium-neodymium metal 镨钕金属 |
China National Standards al |
English PDF |
GB/T 18115.2-2020 |
Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 2: Determination of lanthanum, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yt 稀土金属及其氧化物中稀土杂质化学分析方法 第2部分:铈中镧、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定 |
China National Standards al |
English PDF |
GB/T 18115.1-2020 |
Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 1: Determination of cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttri 稀土金属及其氧化物中稀土杂质化学分析方法 第1部分:镧中铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定 |
China National Standards al |
English PDF |
GB/T 15159-2020 |
Composite material strips of precious metals and their alloys 贵金属及其合金复合带材 |
China National Standards al |
English PDF |
GB/T 14635-2020 |
Rare earth metals and their compounds—Determination of total rare earth content 稀土金属及其化合物化学分析方法 稀土总量的测定 |
China National Standards al |
English PDF |
GB/T 12688.10-2020 |
Test method of styrene for industrial use—Part 10: Determination of oxygenates—Gas chromatography 工业用苯乙烯试验方法 第10部分:含氧化合物的测定 气相色谱法 |
China National Standards al |
English PDF |
GB/T 8185-2020 |
Palladium(II) chloride 二氯化钯 |
China National Standards al |
English PDF |
GB/T 7996-2020 |
Norminal capacity and diameter of glass-lined equipment 搪玻璃容器公称容积与公称直径 |
China National Standards al |
English PDF |
GB/T 5832.4-2020 |
Gas analysis—Determination of moisture—Part 4: The method of quartz crystal oscillation 气体分析 微量水分的测定 第4部分:石英晶体振荡法 |
China National Standards al |
English PDF |
GB/T 5211.6-2020 |
General methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension 颜料和体质颜料通用试验方法 第6部分:水悬浮液pH值的测定 |
China National Standards al |
English PDF |
GB/T 5211.3-2020 |
General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ 颜料和体质颜料通用试验方法 第3部分:105℃挥发物的测定 |
China National Standards al |
English PDF |
GB/T 2968-2020 |
Samarium metal 金属钐 |
China National Standards al |
English PDF |
GB/T 22517.6-2020 |
Technical requirements and test methods for sports field—Part 6: Track and field 体育场地使用要求及检验方法 第6部分:田径场地 |
China National Standards al |
English PDF |
Find out:31723Items | To Page of: First -Previous-Next -Last | [57] [58] [59] [60] [61] [62] [63] |