GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 35100-2018 |
Fiber metal laminates—Determination of interlaminar shear strength by short-beam method 纤维金属层板 短梁法测定层间剪切强度 |
China National Standards met |
English PDF |
GB/T 35099-2018 |
Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air 微束分析 扫描电镜-能谱法 大气细粒子单颗粒形貌与元素分析 |
China National Standards met |
English PDF |
GB/T 36142-2018 |
Test methods of color and color difference for architectural glass 建筑玻璃颜色及色差的测量方法 |
China National Standards met |
English PDF |
GB/T 35017-2018 |
Continuous handing equipment - Bulk Solids Chassification, Symbol, Performance and Test methods 连续搬运设备 散状物料分类、符号、性能及测试方法 |
China National Standards met |
English PDF |
GB/T 36141-2018 |
methods for phase composition analysis of calcined gypsum 建筑石膏相组成分析方法 |
China National Standards met |
English PDF |
GB/T 35097-2018 |
Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air 微束分析 扫描电镜-能谱法 环境空气中石棉等无机纤维状颗粒计数浓度的测定 |
China National Standards met |
English PDF |
GB/T 36261-2018 |
On-site test technical condition and calculation for optical and thermal parameters of energy saving glass for building 建筑用节能玻璃光学及热工参数现场测量技术条件与计算方法 |
China National Standards met |
English PDF |
GB/T 36264-2018 |
Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment 超高温氧化环境下纤维复合材料拉伸强度试验方法 |
China National Standards met |
English PDF |
GB/T 36267-2018 |
Test method of energy consumption per unit products for tempered glass 钢化玻璃单位产品能耗测试方法 |
China National Standards met |
English PDF |
GB/T 11716-2018 |
Logs of small diameter 小径原木 |
China National Standards met |
English PDF |
GB/T 35015-2018 |
Calibration method for calibrated cylinder used in water jacket hydrostatic test 气瓶外测法水压试验用标准瓶的标定方法 |
China National Standards met |
English PDF |
GB/T 35054-2018 |
Process performance test method and decision rule for coal separating in heavy medium cyclones 选煤用重介质旋流器工艺性能试验方法及判定规则 |
China National Standards met |
English PDF |
GB/T 35030-2018 |
Determination methods for launching height,launching deflection angle and radiation radius of fireworks 烟花发射高度、发射偏斜角、辐射半径测定方法 |
China National Standards met |
English PDF |
GB/T 36268-2018 |
Test method of energy consumption per unit products for laminated glass 夹层玻璃单位产品能耗测试方法 |
China National Standards met |
English PDF |
GB/T 36194-2018 |
Detection method of goldfish haematopoietic necrosis virus 金鱼造血器官坏死病毒检测方法 |
China National Standards met |
English PDF |
GB/T 35023-2018 |
methods to assess the reliability of hydraulic components 液压元件可靠性评估方法 |
China National Standards met |
English PDF |
GB/T 35024-2018 |
Detection method of mammals and poultry ingredients—Suspended bead array 常见畜禽动物成分检测方法 液相芯片法 |
China National Standards met |
English PDF |
GB/T 35022-2018 |
Additive manufacturing—Main characteristics and corresponding test methods—Parts and powder materials 增材制造 主要特性和测试方法 零件和粉末原材料 |
China National Standards met |
English PDF |
GB/T 17982-2018 |
Models and parameters for calculating radiation doses to the public in the emergency of a nuclear accident 核事故应急情况下公众受照剂量估算的模式和参数 |
China National Standards met |
English PDF |
GB/T 35029-2018 |
method based the microarray for mutation detetion of hereditary hearing loss 基于微阵列芯片的遗传性耳聋基因检测方法 |
China National Standards met |
English PDF |
GB/T 35067-2018 |
Corrosion resistant alloy bimetal bends for petroleum and natural gas industries 石油天然气工业用耐腐蚀合金复合弯管 |
China National Standards met |
English PDF |
GB/T 34542.2-2018 |
Storage and transportation systems for gaseous hydrogen—Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere 氢气储存输送系统 第2部分:金属材料与氢环境相容性试验方法 |
China National Standards met |
English PDF |
GB/T 36191-2018 |
Protocol of diagnostic methods for red sea bream iridovirus disease(RSIVD) 真鲷虹彩病毒病诊断规程 |
China National Standards met |
English PDF |
GB/T 12539-2018 |
Motor vehicles steep hill climbing test method 汽车爬陡坡试验方法 |
China National Standards met |
English PDF |
GB/T 35069-2018 |
Coke—Determination of phosphorus content—Reduced molybdophosphate spectrophotometric method 焦炭 磷含量的测定 还原磷钼酸盐分光光度法 |
China National Standards met |
English PDF |
GB/T 34542.3-2018 |
Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) 氢气储存输送系统 第3部分:金属材料氢脆敏感度试验方法 |
China National Standards met |
English PDF |
GB/T 35072-2018 |
Corrosion resistant alloy bimetal fittings for petroleum and natural gas industries 石油天然气工业用耐腐蚀合金复合管件 |
China National Standards met |
English PDF |
GB/T 36159-2018 |
Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择 |
China National Standards met |
English PDF |
GB/T 36139-2018 |
Grain and oil machinery—Editorial nominating method for model designation 粮油机械 产品型号编制方法 |
China National Standards met |
English PDF |
GB/T 35073-2018 |
Evaluation method of energy saving grade for gas burner 燃气燃烧器节能等级评价方法 |
China National Standards met |
English PDF |
GB/T 18916.35-2018 |
Norm of water intake—Part 35: methyl alcohol produced by coal 取水定额 第35部分:煤制甲醇 |
China National Standards met |
English PDF |
GB/T 35053-2018 |
Sealed coring method for determination of coalbed methane content 煤层气含量测定用密闭取心方法 |
China National Standards met |
English PDF |
GB/T 21678-2018 |
Calculating methods on the economic loss of fishery pollution accidents 渔业污染事故经济损失计算方法 |
China National Standards met |
English PDF |
GB/T 36402-2018 |
Thermal analysis-mass spectrometry coupling method for ceramics materials 陶瓷材料的热分析-质谱联用测试方法 |
China National Standards met |
English PDF |
GB/T 6609.12-2018 |
Chemical analysis methods and determination of physical performance of alumina—Part 12:Determination of zinc oxide content—Flame atomic absorption spectrometry method 氧化铝化学分析方法和物理性能测定方法 第12部分:氧化锌含量的测定 火焰原子吸收光谱法 |
China National Standards met |
English PDF |
GB/T 36164-2018 |
High alloy steel—Determination of multi-element contents—X-ray fluorescence spectrometry (routine method) 高合金钢 多元素含量的测定 X射线荧光光谱法(常规法) |
China National Standards met |
English PDF |
GB/T 223.82-2018 |
Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas 钢铁 氢含量的测定 惰性气体熔融-热导或红外法 |
China National Standards met |
English PDF |
GB/T 6730.52-2018 |
Iron ores—Determination of cobalt content—Flame atomic absorption spectrometric method 铁矿石 钴含量的测定 火焰原子吸收光谱法 |
China National Standards met |
English PDF |
GB/T 36165-2018 |
Determination of average grain size of metal—Electron backscatter diffraction (EBSD)method 金属平均晶粒度的测定 电子背散射衍射(EBSD)法 |
China National Standards met |
English PDF |
GB/T 36137-2018 |
Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module 中空纤维超滤膜和微滤膜组件完整性检验方法 |
China National Standards met |
English PDF |
GB/T 35052-2018 |
Magnetite content measurement method for heavy medium suspension used in heavy medium cyclones in coal preparation plant 选煤厂重介质旋流器悬浮液中磁性物含量的测定方法 |
China National Standards met |
English PDF |
GB/T 36403-2018 |
Test methods of infrared transmittance for infrared optical glass—Fourier transform method 红外光学玻璃红外透过率测试方法 傅里叶变换法 |
China National Standards met |
English PDF |
GB/T 15970.1-2018 |
Corrosion of metals and alloys—Stress corrosion testing—Part 1: General guidance on testing procedures 金属和合金的腐蚀 应力腐蚀试验 第1部分:试验方法总则 |
China National Standards met |
English PDF |
GB/T 34474.2-2018 |
Determination of banded structure of steel—Part 2: Quantitative method 钢中带状组织的评定 第2部分:定量法 |
China National Standards met |
English PDF |
GB/T 20975.27-2018 |
methods for chemical analysis of aluminium and aluminium alloys—Part 27:Determination of cerium,lanthanum,scandium—Inductively coupled plasma atomic emission spectrometry method 铝及铝合金化学分析方法 第27部分:铈、镧、钪含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards met |
English PDF |
GB/T 19292.4-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 第4部分:用于评估腐蚀性的标准试样的腐蚀速率的测定 |
China National Standards met |
English PDF |
GB/T 6609.6-2018 |
Chemical analysis methods and determination of physical performance of alumina—Part 6:Determination of potassium oxide content 氧化铝化学分析方法和物理性能测定方法 第6部分:氧化钾含量的测定 |
China National Standards met |
English PDF |
GB/T 19292.3-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres 金属和合金的腐蚀 大气腐蚀性 第3部分:影响大气腐蚀性环境参数的测量 |
China National Standards met |
English PDF |
GB/T 36174-2018 |
Corrosion of metals and alloys—Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 金属和合金的腐蚀 固溶热处理铝合金的耐晶间腐蚀性的测定 |
China National Standards met |
English PDF |
GB/T 15711-2018 |
Inspection of non-metallic inclusions of steel—Etching test method of tower samples 钢中非金属夹杂物的检验 塔形发纹酸浸法 |
China National Standards met |
English PDF |
GB/T 36176-2018 |
Vacuum technology—Vacuum leak testing method by helium mass spectrometer 真空技术 氦质谱真空检漏方法 |
China National Standards met |
English PDF |
GB/T 36212-2018 |
Non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component 无损检测 地下金属构件水泥防护层胶结声波检测及结果评价 |
China National Standards met |
English PDF |
GB/T 6730.2-2018 |
Iron ores—Determination of moisture content—Gravimetric method 铁矿石 水分含量的测定 重量法 |
China National Standards met |
English PDF |
GB/T 21671-2018 |
Ethernet technology based local area network(LAN) systems acceptance test methods 基于以太网技术的局域网(LAN)系统验收测试方法 |
China National Standards met |
English PDF |
GB/T 33767.5-2018 |
Information technology—Biometric sample quality—Part 5: Face image data 信息技术 生物特征样本质量 第5部分:人脸图像数据 |
China National Standards met |
English PDF |
GB/T 22137.2-2018 |
Valve positioners for industrial process control systems—Part 2: methods of evaluating the performance of intelligent valve positioners 工业过程控制系统用阀门定位器 第2部分:智能阀门定位器性能评定方法 |
China National Standards met |
English PDF |
GB/T 36243-2018 |
Input/output protocols and electronic interfaces for water meters—Requirements 水表输入输出协议及电子接口 要求 |
China National Standards met |
English PDF |
GB/T 36244-2018 |
Inductively coupled plasma atomic emission spectrometer 电感耦合等离子体原子发射光谱仪 |
China National Standards met |
English PDF |
GB/T 36457-2018 |
Modeling method of complex product virtual prototype 复杂产品虚拟样机建模方法 |
China National Standards met |
English PDF |
GB/T 36460-2018 |
Information technology—Biometrics—Multimodal and other multibiometric fusion 信息技术 生物特征识别 多模态及其他多生物特征融合 |
China National Standards met |
English PDF |
GB/T 33260.3-2018 |
Capability of detection—Part 3: methodology for determination of the critical value for the response variable when no calibration data are used 检出能力 第3部分:无校准数据情形响应变量临界值的确定方法 |
China National Standards met |
English PDF |
GB/T 33260.2-2018 |
Capability of detection—Part 2: methodology in the linear calibration case 检出能力 第2部分:线性校准情形检出限的确定方法 |
China National Standards met |
English PDF |
GB/T 36536-2018 |
Test method of water balance in cement production enterprises 水泥生产企业水平衡测试方法 |
China National Standards met |
English PDF |
GB/T 36242-2018 |
Volume conversion device for gas meter 燃气流量计体积修正仪 |
China National Standards met |
English PDF |
GB/T 36241-2018 |
Vortex precession flowmeters for gas 气体旋进旋涡流量计 |
China National Standards met |
English PDF |
GB/T 609-2018 |
Chemical reagent—General method for the determination of total nitrogen 化学试剂 总氮量测定通用方法 |
China National Standards met |
English PDF |
GB/T 33767.6-2018 |
Information technology—Biometric sample quality—Part 6: Iris image data 信息技术 生物特征样本质量 第6部分:虹膜图像数据 |
China National Standards met |
English PDF |
GB/T 12684-2018 |
Boron compound for industrial use—methods of test 工业硼化物 分析方法 |
China National Standards met |
English PDF |
GB/T 36383-2018 |
Treatment and disposal method for the high boiling from vinyl chloride rectification process 氯乙烯精馏过程中高沸物处理处置方法 |
China National Standards met |
English PDF |
GB/T 36484-2018 |
metalforming machinery—Terminology 锻压机械 术语 |
China National Standards met |
English PDF |
GB/T 36382-2018 |
Treatment and disposal method for waste mercury catalyst 废汞触媒处理处置方法 |
China National Standards met |
English PDF |
GB/T 36563-2018 |
methanol to gasoline component oil 甲醇制汽油组分油 |
China National Standards met |
English PDF |
GB/T 16476-2018 |
Scandium metal 金属钪 |
China National Standards met |
English PDF |
GB/T 3488.2-2018 |
Hardmetals—Metallographic determination of microstructure—Part 2:Measurement of WC grain size 硬质合金 显微组织的金相测定 第2部分:WC晶粒尺寸的测量 |
China National Standards met |
English PDF |
GB/T 36384-2018 |
Determination of mercury in inorganic chemical product—Atomic fluorescence spectrometry 无机化工产品中汞的测定 原子荧光光谱法 |
China National Standards met |
English PDF |
GB/T 36385-2018 |
Treatment and disposal method for developing waste liquid of photosensitive material 感光材料冲洗行业废液处理处置方法 |
China National Standards met |
English PDF |
GB/T 36410.3-2018 |
Energy consumption evaluation methods of port equipment—Part 3: Bridge type grab ship unloader 港口设备能源消耗评价方法 第3部分:桥式抓斗卸船机 |
China National Standards met |
English PDF |
GB/T 12690.15-2018 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content 稀土金属及其氧化物中非稀土杂质 化学分析方法 第15部分:钙量的测定 |
China National Standards met |
English PDF |
GB/T 26645.4-2018 |
Particle size analysis—Gravitational liquid sedimentation methods—Part 4:Balance method 粒度分析 液体重力沉降法 第4部分:天平法 |
China National Standards met |
English PDF |
GB/T 19071.2-2018 |
Wind turbines—Asynchronous generatorg—Part 2: Testing methods 风力发电机组 异步发电机 第2部分:试验方法 |
China National Standards met |
English PDF |
GB/T 36410.4-2018 |
Energy consumption evaluation methods of port equipment—Part 4: Bulk ship loader 港口设备能源消耗评价方法 第4部分:散货连续装船机 |
China National Standards met |
English PDF |
GB/T 36410.2-2018 |
Energy consumption evaluation methods of port equipment—Part 2: Rail mounted container gantry crane 港口设备能源消耗评价方法 第2部分:轨道式集装箱门式起重机 |
China National Standards met |
English PDF |
GB/T 36410.1-2018 |
Energy consumption evaluation methods of port equipment—Part 1:Quayside container crane 港口设备能源消耗评价方法 第1部分:岸边集装箱起重机 |
China National Standards met |
English PDF |
GB/T 36410.5-2018 |
Energy consumption evaluation methods of port equipment—Part 5: Port tractor 港口设备能源消耗评价方法 第5部分:港口牵引车 |
China National Standards met |
English PDF |
GB/T 36409-2018 |
method of structural design for self-elevating units—Load and resistance factor design (LRFD) method 自升式平台结构设计方法 载荷抗力系数设计法 |
China National Standards met |
English PDF |
GB/T 36542-2018 |
Haze identification for meteorological observation 霾的观测识别 |
China National Standards met |
English PDF |
GB/T 3294-2018 |
Test method of inspection for last sizes 鞋楦尺寸检测方法 |
China National Standards met |
English PDF |
GB/T 6113.202-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-2: Methods of measurement of disturbances and immunity—Measurement of disturbance power 无线电骚扰和抗扰度测量设备和测量方法规范 第2-2 部分:无线电骚扰和抗扰度测量方法 骚扰功率测量 |
China National Standards met |
English PDF |
GB/T 36551-2018 |
Calculation methods for properties of concentric lay overhead electrical stranded conductors 同心绞架空导线性能计算方法 |
China National Standards met |
English PDF |
GB/T 18655-2018 |
Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards met |
English PDF |
GB/T 36526-2018 |
Test methods of industrial nitrocellulose 工业用硝化纤维素测试方法 |
China National Standards met |
English PDF |
GB/T 6113.102-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-2:Radio disturbance and immunity measuring apparatus—Coupling devices for conducted disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-2部分:无线电骚扰和抗扰度测量设备 传导骚扰测量的耦合装置 |
China National Standards met |
English PDF |
GB/T 17659.1-2018 |
Sampling and judging methods for lot inspection of logs and sawn timbers—Part 1:Sampling and judging methods for lot inspection of logs 原木锯材批量检查抽样、判定方法 第1部分:原木批量检查抽样、判定方法 |
China National Standards met |
English PDF |
GB/T 36422-2018 |
Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method 化学纤维 微观形貌及直径的测定 扫描电镜法 |
China National Standards met |
English PDF |
GB/T 24836-2018 |
1100kV gas-insulated metal-enclosed switchgear 1100kV气体绝缘金属封闭开关设备 |
China National Standards met |
English PDF |
GB/T 24845-2018 |
Specification of metal–oxide surge arresters without gaps for 1000kV a.c. system 1000kV交流系统用无间隙金属氧化物避雷器技术规范 |
China National Standards met |
English PDF |
GB/T 36509-2018 |
Requirements and testing methods of structure strength for paraglider 滑翔伞结构强度要求及测试方法 |
China National Standards met |
English PDF |
GB/T 33260.5-2018 |
Capability of detection—Part 5: methodology in the linear and nonlinear calibration cases 检出能力 第5部分:非线性校准情形检出限的确定方法 |
China National Standards met |
English PDF |
GB/T 33260.4-2018 |
Capability of detection—Part 4: methodology for comparing the minimum detectable value with a given value 检出能力 第4部分:最小可检出值与给定值的比较方法 |
China National Standards met |
English PDF |
GB/T 26168.1-2018 |
Electrical insulating materials—Determination of the effects of ionizing radiation—Part 1:Radiation interaction and dosimetry 电气绝缘材料 确定电离辐射的影响 第1部分:辐射相互作用和剂量测定 |
China National Standards met |
English PDF |
Find out:14572Items | To Page of: First -Previous-Next -Last | [30] [31] [32] [33] [34] [35] [36] |