Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 30515-2014 |
Petroleum products―Transparent and opaque liquid―Determination of kinematic viscosity and calculation of dynamic viscosity 透明和不透明液体石油产品运动黏度测定法及动力黏度计算法 |
China National Standards si |
 English PDF |
| GB/T 30505-2014 |
Measure method for emission pollutants of exhaust gas of marine incinerator 船用焚烧炉烟气排放测量方法 |
China National Standards si |
English PDF |
| GB/T 30502-2014 |
Traffic signal controller for lanes on urban road 城市道路车道交通信号控制机 |
China National Standards si |
English PDF |
| GB/T 30500-2014 |
Ultrasonic gas flow meter performance online audit―Method using speed of sound checking 气体超声流量计使用中检验 声速检验法 |
China National Standards si |
English PDF |
| GB/T 30499-2014 |
Inland navigation vessels―Manually cable fightening winch―Safety requirements and main dimensions 内河船 手动紧缆绞车 安全要求和主要尺寸 |
China National Standards si |
English PDF |
| GB/T 30495-2014 |
Ships and marine technology―Drawings for fire protection―Indications of fire rating by divisions for ships and high-speed craft 船舶与海上技术 防火图 船舶及高速艇防火等级划分的表示 |
China National Standards si |
English PDF |
| GB/T 30491.1-2014 |
Natural gas—Calculation of thermodynamic properties—Part 1: Gas phase properties for transmission and distribution applications 天然气 热力学性质计算 第1部分：输配气中的气相性质 |
China National Standards si |
English PDF |
| GB/T 30489-2014 |
Bodyside entrance systems for urban rail transit vehicle 城市轨道车辆客室侧门 |
China National Standards si |
English PDF |
| GB/T 11145-2014 |
Standard test method for measurement of low-temperature viscosity of lubricants―Brookfield viscometer method 润滑剂低温黏度的测定 勃罗克费尔特黏度计法 |
China National Standards si |
English PDF |
| GB/T 11060.10-2014 |
Natural gas―Determination of sulfur compounds―Part 10: Determination of sulfur compounds using gas chromatography method 天然气 含硫化合物的测定 第10部分：用气相色谱法测定硫化合物 |
China National Standards si |
English PDF |
| GB 50970-2014 |
Code for design of open-pit mining engineering in decoration stone mine 装饰石材矿山露天开采工程设计规范 |
China National Standards si |
English PDF |
| GB 50966-2014 |
Code for design of electric vehicle charging station 电动汽车充电站设计规范 |
China National Standards si |
English PDF |
| GB 50255-2014 |
Code for construction and acceptance of power conversion equipment electric equipment installation engineering 电气装置安装工程电力变流设备施工及验收规范 |
China National Standards si |
English PDF |
| GB 50058-2014 |
Code for design of electrical installations in explosive atmospheres 爆炸危险环境电力装置设计规范 |
China National Standards si |
English PDF |
| GB 50965-2014 |
Code for design of sinter and pellet flue gas ammonia desulfurization 冶金烧结球团烟气氨法脱硫设计规范 |
China National Standards si |
English PDF |
| GB 50963-2014 |
Code for design of wastewater treatment in sulfuric acid and phosphate fertilizer production 硫酸、磷肥生产污水处理设计规范 |
China National Standards si |
English PDF |
| GB 50962-2014 |
Code for design of copper processing plant 铜加工厂工艺设计规范 |
China National Standards si |
English PDF |
| GB 50954-2014 |
Code for design of municipal solid waste co-processing in cement kiln 水泥窑协同处置垃圾工程设计规范 |
China National Standards si |
English PDF |
| GB 50877-2014 |
Code for installation and acceptance of fire resistant shutters, fire resistant doorsets and fire resistant windows 防火卷帘、防火门、防火窗施工及验收规范 |
China National Standards si |
English PDF |
| GB 50872-2014 |
Code for fire protection design of hydropower projects 水电工程设计防火规范 |
China National Standards si |
English PDF |
| GB 50029-2014 |
Code for design of compressed air station 压缩空气站设计规范 |
China National Standards si |
English PDF |
| GB 4706.109-2013 |
Household and similar electrical appliances—Safety—Particular requirements for electrolysers 家用和类似用途电器的安全 电解槽的特殊要求 |
China National Standards si |
English PDF |
| GB/Z 30373-2013 |
Materials declaration questionnaires of electrical and electronic products—Basic guidelines 电子电气产品材料声明问卷 基本指南 |
China National Standards si |
English PDF |
| GB/T 30372-2013 |
Guide for acceptance of distributed control system in fossil fuel power plant 火力发电厂分散控制系统验收导则 |
China National Standards si |
English PDF |
| GB 30460-2013 |
Safety of woodworking machines―One side thickness planing machines 木工机床安全 单面压刨床 |
China National Standards si |
English PDF |
| GB/T 30420.1-2013 |
Sewing machine terminology—Part 1: Basic terminology 缝纫机术语 第1部分：基础术语 |
China National Standards si |
English PDF |
| GB/T 30419-2013 |
Determination of antimony, arsenic, barium, cadmium,chromium, lead,mercury, selenium element migration from toy materials―Inductively coupled plasma atomic emission spectrometry 玩具材料中可迁移元素锑、砷、钡、镉、铬、铅、汞、硒的测定 电感耦合等离子体原子发射光谱法 |
China National Standards si |
English PDF |
| GB/T 30414-2013 |
Norms of collection for music signals of musical instruments 乐器音乐信号采集规范 |
China National Standards si |
English PDF |
| GB/T 30412-2013 |
Determination of water vapour transmission rate for plastic film and sheeting—Humidity detection sensor method 塑料薄膜和薄片水蒸气透过率的测定 湿度传感器法 |
China National Standards si |
English PDF |
| GB/T 30411-2013 |
Foorwear machines—Flexing resistance tester 制鞋机械 耐折试验仪 |
China National Standards si |
English PDF |
| GB/T 30410-2013 |
Leather machine—Leather bursing strength tester 制革机械 皮革崩裂强度测试仪 |
China National Standards si |
English PDF |
| GB/T 30238-2013 |
Normalization construction and basic requirements of instruments and equipments of conservation and restoration laboratory of Movable Cultural Relics 可移动文物保护修复室规范化建设与仪器装备基本要求 |
China National Standards si |
English PDF |
| GB/T 30227-2013 |
Basic requirements of repository for pre-1912 Chinese books in libraries 图书馆古籍书库基本要求 |
China National Standards si |
English PDF |
| GB/T 21709.21-2013 |
Standardized manipulations of acupuncture and moxibustion―Part 21: Filiform needle manipulation by basic applying technique 针灸技术操作规范 第21部分：毫针基本手法 |
China National Standards si |
English PDF |
| GB/T 19658-2013 |
Method of measurement of center beam intensity and beam angle(s)of reflector lamps 反射灯中心光强和光束角的测量方法 |
China National Standards si |
English PDF |
| GB/T 18204.1-2013 |
Examination methods for public places—Part 1: Physical parameters 公共场所卫生检验方法 第1部分：物理因素 |
China National Standards si |
English PDF |
| GB 30187-2013 |
Design specifications for melting and casting security of copper and copper alloys 铜及铜合金熔铸安全设计规范 |
China National Standards si |
English PDF |
| GB 30185-2013 |
The norm of energy consumption for unit product of aluminum-plastic composite panel 铝塑板单位产品能源消耗限额 |
China National Standards si |
English PDF |
| GB 30181-2013 |
The norm of energy consumption per unit product of microcratal alumina ceramic abrasive medium 微晶氧化铝陶瓷研磨球单位产品能源消耗限额 |
China National Standards si |
English PDF |
| GB 19079.9-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 9：Archery place 体育场所开放条件与技术要求 第9部分：射箭场所 |
China National Standards si |
English PDF |
| GB 19079.8-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 8: Shooting range 体育场所开放条件与技术要求 第8部分：射击场所 |
China National Standards si |
English PDF |
| GB 19079.7-2013 |
Operation conditions and technical requirements for gymnasium and playground—Part 7: Figure skating area 体育场所开放条件与技术要求 第７部分：花样滑冰场所 |
China National Standards si |
English PDF |
| GB 19079.31-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 31: Mountaineering place 体育场所开放条件与技术要求 第31部分：高山探险场所 |
China National Standards si |
English PDF |
| GB 19079.29-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 29：Ice climbing place 体育场所开放条件与技术要求 第29部分：攀冰场所 |
China National Standards si |
English PDF |
| GB 19079.28-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 28: Wushu sanda place 体育场所开放条件与技术要求 第28部分：武术散打场所 |
China National Standards si |
English PDF |
| GB 19079.27-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 27：Orienteering & amateur radio direction finding place 体育场所开放条件与技术要求 第27部分：定向、无线电测向场所 |
China National Standards si |
English PDF |
| GB 19079.26-2013 |
Operation conditions and technical requirements for gymnasium and playgroud―Part 26: Aeromodel and spacemodel place 体育场所开放条件与技术要求 第26部分：航空航天模型场所 |
China National Standards si |
English PDF |
| GB 19079.25-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 25: Parachuting place 体育场所开放条件与技术要求 第25部分：跳伞场所 |
China National Standards si |
English PDF |
| GB 19079.24-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 24: Sport aircraft place 体育场所开放条件与技术要求 第24部分：运动飞机场所 |
China National Standards si |
English PDF |
| GB 19079.23-2013 |
Operation conditions and technical requirements for gymnasium and play ground―Part 23: Trampoline place 体育场所开放条件与技术要求 第23部分：蹦床场所 |
China National Standards si |
English PDF |
| GB 19079.22-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 22 : Taekwondo venue 体育场所开放条件与技术要求 第22部分：跆拳道场所 |
China National Standards si |
English PDF |
| GB 19079.21-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 21 : Boxing place 体育场所开放条件与技术要求 第21部分：拳击场所 |
China National Standards si |
English PDF |
| GB 19079.20-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 20：Ice hockey area 体育场所开放条件与技术要求 第20部分：冰球场所 |
China National Standards si |
English PDF |
| GB 19079.13-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 13: Balloon and airship place 体育场所开放条件与技术要求 第13部分：气球与飞艇场所 |
China National Standards si |
English PDF |
| GB 19079.12-2013 |
Operation conditions and technical requirements for gymnasium and playground—Part 12: Hanggliding and paragliding place 体育场所开放条件与技术要求 第12部分：伞翼滑翔场所 |
China National Standards si |
English PDF |
| GB 19079.10-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 10: Scuba diving place 体育场所开放条件与技术要求 第10部分：潜水场所 |
China National Standards si |
English PDF |
| GB/T 7990-2013 |
Vitreous and porcelain enamels―Determination of resistance to impact 搪玻璃层耐机械冲击试验方法 |
China National Standards si |
English PDF |
| GB/T 7989-2013 |
Viterous and porcelain enamels―Determination of resistance to chemical corrosion by boiling acids and their vapours 搪玻璃釉 耐沸腾酸及其蒸气腐蚀性能的测定 |
China National Standards si |
English PDF |
| GB/T 7988-2013 |
Viterous and porcelain enamels―Determination of resistance to alkaline liquids 搪玻璃釉 耐碱性溶液腐蚀性能的测定 |
China National Standards si |
English PDF |
| GB/T 7987-2013 |
Vitreous and porcelain enamels-Determination of resistance to therml shock 搪玻璃层耐温差急变性试验方法 |
China National Standards si |
English PDF |
| GB/T 30482-2013 |
Woodworking machines―Mortising machines with oscillating tool action―Nomenclature 木工机床 振荡式榫槽机 术语 |
China National Standards si |
English PDF |
| GB/T 30478-2013 |
Woodworking machines―Circular sawing machines for building sites―Nomenclature 木工机床 建筑工地用圆锯机 术语 |
China National Standards si |
English PDF |
| GB/T 30477-2013 |
Wookworking machines―Double edging precision circular sawing machines―Nomenclature and acceptance conditions 木工机床 双修边精密圆锯机 术语和精度 |
China National Standards si |
English PDF |
| GB/T 30476-2013 |
Woodworking machines―single chain mortising machines―Nomenclature and acceptance conditions 木工机床 链式单轴榫槽机 术语和精度 |
China National Standards si |
English PDF |
| GB/T 30474.2-2013 |
Holding fixtures of cylindrical abrasive sleeves―Part 2: Holding fixtures for stationary machines 筒形砂套夹紧装置 第2部分：用于固定式磨削机上的夹紧装置 |
China National Standards si |
English PDF |
| GB/T 30474.1-2013 |
Holding fixtures of cylindrical abrasive sleeves―Part 1: Holding fixtures with shank for hand-held grinding machines 筒形砂套夹紧装置 第1部分：用于手持式磨削机上的带轴夹紧装置 |
China National Standards si |
English PDF |
| GB/T 30473-2013 |
Coated abrasives―Cylindrical abrasive sleeves 涂附磨具 筒形砂套 |
China National Standards si |
English PDF |
| GB/T 30472-2013 |
Technical specification of complete sets of feed processing equipment 饲料加工成套设备技术规范 |
China National Standards si |
English PDF |
| GB/T 30470-2013 |
Superabrasives―Diamond wire saw 超硬磨料制品 金刚石绳锯 |
China National Standards si |
English PDF |
| GB/T 30467-2013 |
Conversion rule for specific heat consumption and throughput of across-flow grain dryer 横流粮食干燥机单位耗热量与处理量折算规则 |
China National Standards si |
English PDF |
| GB/T 30464-2013 |
Tractors and machinery for agriculture and forestry―Installation of lighting, light signalling and marking devices for travel on public roadways 农林拖拉机和机械 道路行驶用照明、光信号和标志装置的安装规定 |
China National Standards si |
English PDF |
| GB/T 30457-2013 |
Test methods of rare earth ultraviolet emission phosphors for fluorescent lamps 灯用稀土紫外发射荧光粉试验方法 |
China National Standards si |
English PDF |
| GB/T 30456-2013 |
Rare earth ultraviolet emission phosphors for fluorescent lamps 灯用稀土紫外发射荧光粉 |
China National Standards si |
English PDF |
| GB/T 30454-2013 |
Test methods of silicate phosphors activated by rare earths for LED LED用稀土硅酸盐荧光粉试验方法 |
China National Standards si |
English PDF |
| GB/T 30453-2013 |
Metallographs collection for original defects of crystalline silicon 硅材料原生缺陷图谱 |
China National Standards si |
English PDF |
| GB/T 30452-2013 |
Measurement method for photolysis performance index of photocatalytic nano-materials 光催化纳米材料光解指数测试方法 |
China National Standards si |
English PDF |
| GB/T 30451-2013 |
Ordered mesoporous silica 有序介孔二氧化硅 |
China National Standards si |
English PDF |
| GB/T 30217.1-2013 |
Petroleum and natural gas industries—Drilling and production equipment—Part 1: Design and operation of marine drilling riser equipment 石油天然气工业 钻井和采油设备 第1部分：海洋钻井隔水管设备的设计和操作 |
China National Standards si |
English PDF |
| GB/T 30214-2013 |
Aircraft—Non-metallic pulleys with ball bearings for control cables—Dimensions and loads 飞机 操纵钢索用带球轴承非金属滑轮 尺寸和载荷 |
China National Standards si |
English PDF |
| GB/T 30207-2013 |
Aerospace―Tubing―Outside diameters and thickness―Metric dimentions 航空航天 管子 外径和壁厚 米制尺寸 |
China National Standards si |
English PDF |
| GB/T 30204-2013 |
Aircraft-Liquid oxygen replenishment couplings-Mating dimensions 飞机液氧加注接头配合尺寸 |
China National Standards si |
English PDF |
| GB/T 30202.3-2013 |
Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and compression strength 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分：耐磨强度、耐压强度 |
China National Standards si |
English PDF |
| GB/T 30202.2-2013 |
Test method for granular coal-based activated carbon for desulfurization and denitration process―Part 2: Particle size 脱硫脱硝用煤质颗粒活性炭试验方法 第2部分：粒度 |
China National Standards si |
English PDF |
| GB/T 30202.1-2013 |
Test method for granular activated carbon from coal for desulfurization and denitration process―Part 1: Bulk density 脱硫脱硝用煤质颗粒活性炭试验方法 第1部分：堆积密度 |
China National Standards si |
English PDF |
| GB/T 30199-2013 |
Vitreous and porcelain enamels—Determination of scratch resistance of enamel finishes 搪玻璃层抗划伤性能的测定 |
China National Standards si |
English PDF |
| GB/T 21412.4-2013 |
Petroleum and natural gas industries―Design and operation of subsea production systems―Part 4: Subsea wellhead and tree equipment 石油天然气工业 水下生产系统的设计与操作 第4部分：水下井口装置和采油树设备 |
China National Standards si |
English PDF |
| GB/T 19449.4-2013 |
Hollow taper interface with flange contact surface―Part 4: Dimensions of receivers for stationary tools 带有法兰接触面的空心圆锥接口 第4部分：用于非旋转类工具 安装孔的尺寸 |
China National Standards si |
English PDF |
| GB/T 19449.3-2013 |
Hollow taper interface with flange contact surface― Part 3: Dimensions of shanks for stationary tools 带有法兰接触面的空心圆锥接口 第3部分：用于非旋转类工具 柄的尺寸 |
China National Standards si |
English PDF |
| GB/T 17389-2013 |
Recommended practice for the application of electrical submersible cable system 潜油电泵电缆系统的应用 |
China National Standards si |
English PDF |
| GB/T 10944.2-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 2：Dimensions and designation of shanks of forms J，JD and JF 自动换刀7:24圆锥工具柄 第2部分：J、JD和JF型柄的尺寸和标记 |
China National Standards si |
English PDF |
| GB/T 10944.1-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 1：Dimensions and designation of shanks of forms A，AD，AF，U，UD and UF 自动换刀7:24圆锥工具柄 第1部分：A、AD、AF、U、UD和UF型柄的尺寸和标记 |
China National Standards si |
English PDF |
| GB/T 9572-2013 |
Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 |
China National Standards si |
English PDF |
| GB/T 5567-2013 |
Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 |
China National Standards si |
English PDF |
| GB/T 30316-2013 |
Imaging materials―Film and paper―Determination of dimensional change 影像材料 胶片和相纸 尺寸变化的测定 |
China National Standards si |
English PDF |
| GB/T 30314-2013 |
Rubber-or plastis-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 |
China National Standards si |
English PDF |
| GB/T 30311-2013 |
Test method for tensile properties of dipped aramid yarns and cords 浸胶芳纶纱线、线绳和帘线拉伸性能的试验方法 |
China National Standards si |
English PDF |
| GB/T 30309-2013 |
Polysulfide silane coupling agent 多硫化物硅烷偶联剂 |
China National Standards si |
English PDF |
| GB/T 30191-2013 |
Photocatalysis self-cleaning coatings for exterior wall 外墙光催化自洁涂覆材料 |
China National Standards si |
English PDF |
| GB/T 18915.2-2013 |
Coated glass－Part 2: Low emissivity coated glass 镀膜玻璃 第2部分：低辐射镀膜玻璃 |
China National Standards si |
English PDF |
| GB/T 14853.1-2013 |
Rubber compounding ingredients—Pelletized carbon black—Part 1：Determination of pour density 橡胶用造粒炭黑 第1部分：倾注密度的测定 |
China National Standards si |
English PDF |
| Find out:17019Items | To Page of: First -Previous-Next -Last | [71] [72] [73] [74] [75] [76] [77] |
+86-755-25831330
