Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 2099.6-2008 |
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for fused plugs 家用和类似用途插头插座 第2部分：带熔断器插头的特殊要求 |
China National Standards out |
 English PDF |
| GB 2099.5-2008 |
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets with interlock for fixed installations 家用和类似用途插头插座 第2部分：固定式有联锁带开关插座的特殊要求 |
China National Standards out |
English PDF |
| GB 2099.4-2008 |
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations 家用和类似用途插头插座 第2部分：固定式无联锁带开关插座的特殊要求 |
China National Standards out |
English PDF |
| GB 22794-2008 |
Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) 家用和类似用途的不带和带过电流保护的B型剩余电流动作断路器(B型RCCB和B型RCBO) |
China National Standards out |
English PDF |
| GB/T 3903.29-2008 |
Footwear - Test methods for outsoles - Split tear strength and delamination resistance 鞋类 外底试验方法 剖层撕裂力和层间剥离强度 |
China National Standards out |
English PDF |
| GB/T 3903.28-2008 |
Footwear - Test methods for outsoles - Compression energy 鞋类 外底试验方法 压缩能 |
China National Standards out |
English PDF |
| GB/T 22880-2008 |
Paper and board - Determination of CIE whiteness, D65/10°(outdoor daylight) 纸和纸板 CIE白度的测定，D65/10°(室外日光) |
China National Standards out |
English PDF |
| GB 22659-2008 |
Safety of woodworking machines - Numerically controlled (NC)boring machines and routing machines 木工机床安全 数控钻床和数控镂铣机 |
China National Standards out |
English PDF |
| GB 22556-2008 |
Hygienic standard for bean sprouts 豆芽卫生标准 |
China National Standards out |
English PDF |
| GB/T 13754-2008 |
Test methods of thermal output of heating radiators 采暖散热器散热量测定方法 |
China National Standards out |
English PDF |
| GB/T 22495-2008 |
Grain and oil storage - On-site phosphine generator out of warehouse 粮油储藏 磷化氢发生器 |
China National Standards out |
English PDF |
| GB/T 22430-2008 |
Container transportation EDI - Gate-in/gate-out report message 集装箱运输电子数据交换 进/出门报告报文 |
China National Standards out |
English PDF |
| GB/T 3656-2008 |
Method of coercivity measurement for magnetically soft materials by pull out procedure 软磁材料矫顽力的抛移测量方法 |
China National Standards out |
English PDF |
| GB/T 22389-2008 |
Guidelines of metal oxide surge arresters without gaps for HVDC converter stations 高压直流换流站无间隙金属氧化物避雷器导则 |
China National Standards out |
English PDF |
| GB/T 10066.9-2008 |
Test methods for electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation 电热装置的试验方法 第9部分：高频介质加热装置输出功率的测定 |
China National Standards out |
English PDF |
| GB/T 10066.6-2008 |
Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output 电热装置的试验方法 第6部分：工业微波加热装置输出功率的测定方法 |
China National Standards out |
English PDF |
| GB 2099.1-2008 |
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements 家用和类似用途插头插座 第1部分：通用要求 |
China National Standards out |
English PDF |
| GB 1003-2008 |
Three phases plugs and socket-outlets for household and similar purposes - Types，basic parameters and dimensions 家用和类似用途三相插头插座 型式、基本参数和尺寸 |
China National Standards out |
English PDF |
| GB 1002-2008 |
Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions 家用和类似用途单相插头插座 型式、基本参数和尺寸 |
China National Standards out |
English PDF |
| GB 15146.8-2008 |
Nuclear criticality safety for fissile materials outside reactors - Part 8: Criticality safety criteria for the handling , storage, and transportation of LWR fuel outside reactors 反应堆外易裂变材料的核临界安全 第8部分：堆外操作、贮存、运输轻水堆燃料的核临界安全准则 |
China National Standards out |
English PDF |
| GB 15146.3-2008 |
Nuclear criticality safety for fissile materials outside reactors - Part 3: Requirements for nuclear criticality safety in the storage of fissile materials 反应堆外易裂变材料的核临界安全 第3部分：易裂变材料贮存的核临界安全要求 |
China National Standards out |
English PDF |
| GB 15146.2-2008 |
Nuclear criticality safety for fissile materials outside reactors - Part 2: Basic technical practices and subcritical limits for handling, processing and operations with fissile materials 反应堆外易裂变材料的核临界安全 第2部分：易裂变材料操作、加工、处理的基本技术规则与次临界限值 |
China National Standards out |
English PDF |
| GB 15146.1-2008 |
Nuclear criticality safety for fissile materials outside reactors - Part 1: Administrative practices for nuclear criticality safety 反应堆外易裂变材料的核临界安全 第1部分：核临界安全行政管理规定 |
China National Standards out |
English PDF |
| GB/T 22368-2008 |
Low-alloy steel - Determination of multi-element contents - Glow discharge optical emission spectrometry（Routine method） 低合金钢 多元素含量的测定 辉光放电原子发射光谱法（常规法） |
China National Standards out |
English PDF |
| GB/T 11170-2008 |
Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) 不锈钢 多元素含量的测定 火花放电原子发射光谱法（常规法） |
China National Standards out |
English PDF |
| GB/T 10175.2-2008 |
Earth moving machinery - Loaders and backhoe loaders - Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height 土方机械 装载机和挖掘装载机 第2部分：掘起力和最大提升高度提升能力的测试方法 |
China National Standards out |
English PDF |
| GB/T 7308-2008 |
Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test 滑动轴承 有法兰或无法兰薄壁轴瓦 公差、结构要素和检验方法 |
China National Standards out |
English PDF |
| GB/T 880-2008 |
Clevis pins without head 无头销轴 |
China National Standards out |
English PDF |
| GB/T 22330.2-2008 |
Standard for specifed animal disease free zone - Part 2: Foot and mouth disease free zone 无规定动物疫病区标准 第2部分：无口蹄疫区 |
China National Standards out |
English PDF |
| GB/T 4217-2008 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures 流体输送用热塑性塑料管材 公称外径和公称压力 |
China National Standards out |
English PDF |
| GB/T 12177-2008 |
Industrial automation systems - Numerical control of machines - NC processor output - File structure and language format 工业自动化系统 机床数值控制 NC处理器输出 文件结构和语言格式 |
China National Standards out |
English PDF |
| GB/T 11292-2008 |
Industrial automation systems - Numerical control of machines - NC processor output - Post processor commands 工业自动化系统 机床数值控制 NC处理器输出 后置处理命令 |
China National Standards out |
English PDF |
| GB/T 14303-2008 |
Wookworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions 木工机床 单锯片圆锯机 术语和精度 |
China National Standards out |
English PDF |
| GB/T 22276-2008 |
Advisory document for good laboratory practice - Requesting and carrying out inspections and study audits in another country 良好实验室规范建议性文件 在另一国家中要求和执行检查与研究审核 |
China National Standards out |
English PDF |
| GB/T 17614.2-2008 |
Transmitters for use industrial-process control systems - Part 2: Methods for inspection and routine testing 工业过程控制系统用变送器 第2部分: 检查和例行试验方法 |
China National Standards out |
English PDF |
| GB/T 6380-2008 |
Statistical interpretation of data - Detection and treatment of outliers in the sample from typeⅠextreme value distribution 数据的统计处理和解释 Ⅰ型极值分布样本离群值的判断和处理 |
China National Standards out |
English PDF |
| GB/T 8056-2008 |
Statistical interpretation of data - Detection and treatment of outliers in the sample from exponential distribution 数据的统计处理和解释 指数分布样本离群值的判断和处理 |
China National Standards out |
English PDF |
| GB/T 4883-2008 |
Statistical interpretation of data - Detection and treatment of outliers in the normal sample 数据的统计处理和解释 正态样本离群值的判断和处理 |
China National Standards out |
English PDF |
| GB/T 17294.2-2008 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第2部分:方法 |
China National Standards out |
English PDF |
| GB/T 17294.1-2008 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: Characteristics of the test slide and test data 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第1部分: 测试幻灯片和测试数据的特征 |
China National Standards out |
English PDF |
| GB/T 8287.2-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characteristics 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性 |
China National Standards out |
English PDF |
| GB/T 8287.1-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 1: Test on insulators of ceramic material or glass 标称电压高于1000V系统用户内和户外支柱绝缘子 第1部分：瓷或玻璃绝缘子的试验 |
China National Standards out |
English PDF |
| GB/T 22079-2008 |
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria 标称电压高于1000V使用的户内和户外聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards out |
English PDF |
| GB/T 22162-2008 |
Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸 |
China National Standards out |
English PDF |
| GB/T 22137.2-2008 |
Valve positiongers for use in industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第2部分：气动输出智能阀门定位器性能评定方法 |
China National Standards out |
English PDF |
| GB/T 22137.1-2008 |
Valve positiongers for use in industrial-process control system - Part 1: Methods of evaluating the performance of valve positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第1部分：气动输出阀门定位器性能评定方法 |
China National Standards out |
English PDF |
| GB/T 14689-2008 |
Technical drawings - Size and layout of drawing sheets 技术制图 图纸幅面和格式 |
China National Standards out |
English PDF |
| GB/T 7940.1-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector 气动 五气口方向控制阀 第1部分：不带电气接头的安装面 |
China National Standards out |
English PDF |
| GB 16916.22-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 22:Applicability of the general rules to RCCB functionally dependent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器（RCCB） 第22部分：一般规则对动作功能与电源电压有关的RCCB的适用性 |
China National Standards out |
English PDF |
| GB 16916.21-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 21:Applicability of the general rules to RCCB functionally independent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器（RCCB） 第21部分：一般规则对动作功能与电源电压无关的RCCB的适用性 |
China National Standards out |
English PDF |
| GB/T 3903.22-2008 |
Footwear - Test methods for outsoles - Tensile strength and elongation 鞋类 外底试验方法 抗张强度和伸长率 |
China National Standards out |
English PDF |
| GB/T 9089.4-2008 |
Electrical installations for outdoor sites under heavy conditions - Part 4: Requirements for the installation 户外严酷条件下的电气设施 第4部分：装置要求 |
China National Standards out |
English PDF |
| GB/T 9089.3-2008 |
Electrical installations for outdoor sites under heavy conditions - Part 3: General requirements for equipment and ancillaries 户外严酷条件下的电气设施 第3部分：设备及附件的一般要求 |
China National Standards out |
English PDF |
| GB/T 9089.2-2008 |
Electrical installations for outdoor Sites under heavy conditions - Part 2: General protection requirements 户外严酷条件下的电气设施 第2部分: 一般防护要求 |
China National Standards out |
English PDF |
| GB/T 9089.1-2008 |
Electrical installations for outdoor Sites under heavy conditions - Part 1: Scope and definitions 户外严酷条件下的电气设施 第1部分：范围和定义 |
China National Standards out |
English PDF |
| GB/T 14190-2008 |
Test methods of fiber grade polyester chip(out of date) 纤维级聚酯切片（PET）试验方法(已作废) |
China National Standards out |
English PDF |
| GB 9089.5-2008 |
Electrical installations for outdoor sites under heavy conditions - Part 5: Operating requirements 户外严酷条件下的电气设施 第5部分: 操作要求 |
China National Standards out |
English PDF |
| GB/T 22034-2008 |
Information technology - Keyboard layout of the alphanumeric zone for Tibetan coded character set 信息技术 藏文编码字符集键盘字母数字区的布局 |
China National Standards out |
English PDF |
| GB/T 15306.3-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分：无孔刀片尺寸（U级） |
China National Standards out |
English PDF |
| GB/T 15306.1-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分：无孔刀片尺寸（G级） |
China National Standards out |
English PDF |
| GB/T 21717-2008 |
Technical specification about the type parameter and performance of small hydraulic turbines 小型水轮机型式参数及性能 技术规定 |
China National Standards out |
English PDF |
| GB/Z 18620.2-2008 |
Cylindrical gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash 圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验 |
China National Standards out |
English PDF |
| GB/T 10095.2-2008 |
Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information 圆柱齿轮 精度制 第2部分：径向综合偏差与径向跳动的定义和允许值 |
China National Standards out |
English PDF |
| GB/T 16846-2008 |
Requirement for the declaration of the acoustic output of medical diagnostic ultrasonic equipment 医用超声诊断设备声输出公布要求 |
China National Standards out |
English PDF |
| GB/T 21560.6-2008 |
Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies assessed performance 低压直流电源 第6部分：评定低压直流电源性能的要求 |
China National Standards out |
English PDF |
| GB/T 21560.3-2008 |
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) 低压直流电源 第3部分：电磁兼容性（EMC） |
China National Standards out |
English PDF |
| GB/T 1182-2008 |
Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out 产品几何技术规范（GPS）几何公差 形状、方向、位置和跳动公差标注 |
China National Standards out |
English PDF |
| GB/T 21430.1-2008 |
Multicore and symmetrical pair/quad cables for broadband digital communications(high bit rate digital access telecommunication networks) outside plant cables - Part 1: Generic specification 宽带数字通信（高速率数字接入通信网络）用对绞或星绞多芯对称电缆-户外电缆 第1部分：总规范 |
China National Standards out |
English PDF |
| GB/T 21429-2008 |
Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations 户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐 |
China National Standards out |
English PDF |
| GB/T 10066.31-2007 |
Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator 电热装置的试验方法 第31部分：高频感应加热装置发生器输出功率的测定 |
China National Standards out |
English PDF |
| GB/T 12721-2007 |
Rubber hoses - Determination of abrasion resistance of the outer cover 橡胶软管 外覆层耐磨耗性能的测定 |
China National Standards out |
English PDF |
| GB/T 21305-2007 |
Cereals and cereal products - Determination of moisture content - Routine reference method 谷物及谷物制品水分的测定 常规法 |
China National Standards out |
English PDF |
| GB/T 3386.2-2007 |
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing 工业过程控制系统用电动和气动模拟图纸记录仪 第2部分：检查和例行试验导则 |
China National Standards out |
English PDF |
| GB/T 18356-2007 |
Product of geographical indication - Kweichow Moutai liquor 地理标志产品 贵州茅台酒 |
China National Standards out |
English PDF |
| GB/T 223.79-2007 |
Iron and steel - Determination of multi - element contents - X - ray fluorescence spectrometry (Routine method) 钢铁 多元素含量的测定 X-射线荧光光谱法（常规法） |
China National Standards out |
English PDF |
| GB/T 15160-2007 |
Land mobile communication system requirements using multi-channel access techniques without a central controller 无中心多信道选址移动通信系统体制 |
China National Standards out |
English PDF |
| GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards out |
English PDF |
| GB 21045-2007 |
Large mouth bass 大口黑鲈 |
China National Standards out |
English PDF |
| GB/T 18018-2007 |
Information security technology - Technical requirements for router security 信息安全技术 路由器安全技术要求 |
China National Standards out |
English PDF |
| GB/T 15055-2007 |
Permissible stamping variations in dimensions without tolerance indication 冲压件未注公差尺寸极限偏差 |
China National Standards out |
English PDF |
| GB/T 20819.2-2007 |
Controllers with analogue signals for use industrial-process control system - Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号控制器 第2部分：检查和例行试验导则 |
China National Standards out |
English PDF |
| GB/T 20818.1-2007 |
Industrial-process measurement and control-data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output 工业过程测量和控制 过程设备目录中的数据结构和元素 第1部分：带模拟和数字输出的测量设备 |
China National Standards out |
English PDF |
| GB/T 20730.1-2006 |
Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance 工业过程控制系统用模拟输入两位或多位输出仪表 第1部分：性能评定方法 |
China National Standards out |
English PDF |
| GB/T 19042.5-2006 |
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验 |
China National Standards out |
English PDF |
| GB/T 20512-2006 |
Position data output format for GPS receiver GPS接收机导航定位数据输出格式 |
China National Standards out |
English PDF |
| GB/T 20526-2006 |
Transport equipment gate-in/gate-out report message XML format 运输设备进场/出场报告报文XML格式 |
China National Standards out |
English PDF |
| GB/T 7178.8-2006 |
The operating for railway shunting―Part 8: Operating for taking out and placing in wagons 铁路调车作业 第8部分：取送车辆作业 |
China National Standards out |
English PDF |
| GB/T 20501.3-2006 |
Guidance system for public information―Design principles and requirements of guidance elements―Part 3: Layout plan and area function graph 公共信息导向系统 要素的设计原则与要求 第3部分：平面示意图和区域功能图 |
China National Standards out |
English PDF |
| GB/T 20367-2006 |
Sterilization of health care products - Requirement for validation and routine control of moist heat sterilization in health care facilities 医疗保健产品灭菌 医疗保健机构湿热灭菌的确认和常规控制要求 |
China National Standards out |
English PDF |
| GB/T 20224-2006 |
Determination of exposure index, ISO speed ratings, standard output sensitivity and recommended exposure index for digital still cameras 数码照相机曝光指数、ISO感光度值、标准输出灵敏度和推荐曝光指数的确定 |
China National Standards out |
English PDF |
| GB 20179-2006 |
Safety of woodworking machines - Circular saw benches (with or without travelling table) and dimension saw 木工机床安全 手动进给圆锯机和带移动工作台锯板机 |
China National Standards out |
English PDF |
| GB/T 20164-2006 |
Prevention and control specifications for mail and mail handling systems in the area of when epidemics breakout 传染病暴发流行期间疫区邮件及处理系统预防控制规范 |
China National Standards out |
English PDF |
| GB/T 20143-2006 |
Procedure for use in the preparation of maximum lamp outlines 灯最大外形尺寸图的制定程序 |
China National Standards out |
English PDF |
| GB/T 20124-2006 |
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 钢铁 氮含量的测定 惰性气体熔融热导法（常规方法） |
China National Standards out |
English PDF |
| GB/T 20123-2006 |
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法（常规方法） |
China National Standards out |
English PDF |
| GB/T 20121-2006 |
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验（疮痂试验） |
China National Standards out |
English PDF |
| GB/T 20083.1-2006 |
Air-assisted agricultural sprayers Data sheets Part 1: Typical layout 风送农业喷雾机 数据表 第1部分:典型格式 |
China National Standards out |
English PDF |
| GB 50014-2006 |
Code for design of outdoor wastewater engineering 室外排水设计规范(2016年版) |
China National Standards out |
English PDF |
| GB 50013-2006 |
Code for design of outdoor water supply engineering 室外给水设计规范 |
China National Standards out |
English PDF |
| GB/T 20058-2006 |
Rolling bearings ― Single-row angular contact ball bearings ― Chamfer dimensions for outer ring non-thrust side 滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸 |
China National Standards out |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
