GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23365-2009 |
Electrochemical performance test of lithium cobalt oxide - Test method for specific capacity and charge-discharge efficiency of the first cycle 钴酸锂电化学性能测试 首次放电比容量及首次充放电效率测试方法 |
China National Standards Electro |
English PDF |
GB/T 23326-2009 |
Stainless steel fibers and cotton-polyester blended grey fabric with Electromagnetic shielding performance 不锈钢纤维与棉涤混纺电磁波屏蔽本色布 |
China National Standards Electro |
English PDF |
GB/T 19520.15-2009 |
Mechanical structures for Electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分:基于连接器的插箱和插件的接口尺寸 |
China National Standards Electro |
English PDF |
GB/T 19520.14-2009 |
Mechanical structures for Electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分:编码键和定位销 |
China National Standards Electro |
English PDF |
GB/T 19520.13-2009 |
Mechanical structures for Electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分:插拔器手柄 |
China National Standards Electro |
English PDF |
GB/T 19520.12-2009 |
Mechanical structures for Electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分:插箱及其插件 |
China National Standards Electro |
English PDF |
GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for Electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分:分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Electro |
English PDF |
GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for Electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分:分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Electro |
English PDF |
GB/T 17363.1-2009 |
Nondestructive mensuration of gold content in the gold products - Part 1: Method of Electron probe microanalysis 黄金制品金含量无损测定方法 第1部分:电子探针微分析法 |
China National Standards Electro |
English PDF |
GB/T 23286.1-2009 |
Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4(PDF/A-1) 文献管理 长期保存的电子文档文件格式 第1部分:PDF1.4(PDF/A-1)的使用 |
China National Standards Electro |
English PDF |
GB/T 3784-2009 |
Electrotechnical terminology - Radar 电工术语 雷达 |
China National Standards Electro |
English PDF |
GB/T 2900.86-2009 |
Electrotechnical terminology - Acoustics and electroacoustics 电工术语 声学和电声学 |
China National Standards Electro |
English PDF |
GB/T 2900.85-2009 |
Electrotechnical terminology - Mathematics - General concepts and linear algebra 电工术语 数学 一般概念和线性代数 |
China National Standards Electro |
English PDF |
GB/T 2900.84-2009 |
Electrotechnical terminology - Tariffs for electricity 电工术语 电价 |
China National Standards Electro |
English PDF |
GB/T 2900.8-2009 |
Electrotechnical terminology - Insulators 电工术语 绝缘子 |
China National Standards Electro |
English PDF |
GB/T 2900.39-2009 |
Electrotechnical terminology - Special equipment for electrical machine and transformer 电工术语 电机、变压器专用设备 |
China National Standards Electro |
English PDF |
GB/T 2900.17-2009 |
Electrotechnical terminology - Measuring relays 电工术语 量度继电器 |
China National Standards Electro |
English PDF |
GB/Z 23283-2009 |
long-term preservation of Electronic document-based information 基于文件的电子信息的长期保存 |
China National Standards Electro |
English PDF |
GB 5093-2009 |
Technical requirements for hand-held Electromagnetic disk used for the presses 压力机用手持电磁吸盘 技术条件 |
China National Standards Electro |
English PDF |
GB/T 21709.11-2009 |
Standardized manipulations of acupuncture and moxibustion - Part 11: Electroacupuncture 针灸技术操作规范 第11部分:电针 |
China National Standards Electro |
English PDF |
GB/T 23278.8-2009 |
Methods for chemical analysis of sodium stannate - Part 8: Determination of nitrate content - Ion selective Electrode method 锡酸钠化学分析方法 第8部分:硝酸盐含量的测定 离子选择电极法 |
China National Standards Electro |
English PDF |
GB/T 23273.6-2009 |
Methods for chemical analysis of cobalt oxalate - Part 6: Determination of chlorine ion content - Ion selective Electrode method 草酸钴化学分析方法 第6部分:氯离子量的测定 离子选择性电极法 |
China National Standards Electro |
English PDF |
GB/T 23273.2-2009 |
Methods for chemical analysis of cobalt oxalate - Part 2: Determination of lead content - Electrothermal atomic absorption spectrometry 草酸钴化学分析方法 第2部分:铅量的测定 电热原子吸收光谱法 |
China National Standards Electro |
English PDF |
GB/T 23272-2009 |
Tungsten wire for lighting and Electronic equipments 照明及电子设备用钨丝 |
China National Standards Electro |
English PDF |
GB 15579.10-2008 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements 弧焊设备 第10部分:电磁兼容性(EMC)要求 |
China National Standards Electro |
English PDF |
GB/T 22663-2008 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Immunity requirements for machine tools 工业机械电气设备 电磁兼容 机床抗扰度要求 |
China National Standards Electro |
English PDF |
GB/T 10582-2008 |
Electrical insulating materials - Determination of Electrolytic corrosion caused by insulating materials-test methods 电气绝缘材料 测定因绝缘材料引起的电解腐蚀的试验方法 |
China National Standards Electro |
English PDF |
GB/T 5169.5-2008 |
Fire hazard testing for electric and Electronic products - Part 5: Test flames - Needle test method - Apparatus, confirmatory arrangement and guidance 电工电子产品着火危险试验 第5部分:试验火焰 针焰试验方法 装置、确认试验方法和导则 |
China National Standards Electro |
English PDF |
GB/T 5169.30-2008 |
Fire hazard testing for electric and Electronic products - Part 30: Heat release - Summary and relevance of test methods 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性 |
China National Standards Electro |
English PDF |
GB/T 5169.29-2008 |
Fire hazard testing for electric and Electronic products - Part 29: Heat release - General guidance 电工电子产品着火危险试验 第29部分:热释放 总则 |
China National Standards Electro |
English PDF |
GB/T 5169.28-2008 |
Fire hazard testing for electric and Electronic products - Part 28: Smoke obscuration - Small-scale static test - Materials 电工电子产品着火危险试验 第28部分:烟模糊 小规模静态试验方法 材料 |
China National Standards Electro |
English PDF |
GB/T 5169.27-2008 |
Fire hazard testing for electric and Electronic products - Part 27: Smoke obscuration - Small-scale static test - Description of the apparatus 电工电子产品着火危险试验 第27部分:烟模糊 小规模静态试验方法 仪器说明 |
China National Standards Electro |
English PDF |
GB/T 5169.26-2008 |
Fire hazard testing for electric and Electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods 电工电子产品着火危险试验 第26部分:烟模糊 试验方法概要和相关性 |
China National Standards Electro |
English PDF |
GB/T 5169.25-2008 |
Fire hazard testing for electric and Electronic products - Part 25: Smoke obscuration - General guidance 电工电子产品着火危险试验 第25部分:烟模糊 总则 |
China National Standards Electro |
English PDF |
GB/T 5169.24-2008 |
Fire hazard testing for electric and Electronic products - Part 24: Guidance for assessing the fire hazard - Insulating liquids 电工电子产品着火危险试验 第24部分:着火危险评定导则 绝缘液体 |
China National Standards Electro |
English PDF |
GB/T 5169.23-2008 |
Fire hazard testing for electric and Electronic products - Part 23: Test flames-500W vertical flame test method for tubular polymeric materials 电工电子产品着火危险试验 第23部分:试验火焰 管形聚合材料500W垂直火焰试验方法 |
China National Standards Electro |
English PDF |
GB/T 22710-2008 |
Electronic controller for low-voltage circuit breaker 低压断路器用电子式控制器 |
China National Standards Electro |
English PDF |
GB/T 7724-2008 |
Electronic weighing meter 电子称重仪表 |
China National Standards Electro |
English PDF |
GB/T 7723-2008 |
Fixed location Electronic instrument 固定式电子衡器 |
China National Standards Electro |
English PDF |
GB/T 23131-2008 |
Electronical toilets 电子坐便器 |
China National Standards Electro |
English PDF |
GB/T 22920-2008 |
Electrolytic capacitor paper 电解电容器纸 |
China National Standards Electro |
English PDF |
GB/T 15730-2008 |
Pliers and nippers for Electronics - General technical requirements 电讯夹扭钳和剪切钳通用技术条件 |
China National Standards Electro |
English PDF |
GB/T 15561-2008 |
Electronic static rail weighbridge 静态电子轨道衡 |
China National Standards Electro |
English PDF |
GB/T 22642-2008 |
Aluminum foil for Electronic and power capacitor 电子、电力电容器用铝箔 |
China National Standards Electro |
English PDF |
GB/T 22630-2008 |
Audio video-apparatus on board Electromagnetic compatibility requirement and methods of measurement 车载音视频设备电磁兼容性要求和测量方法 |
China National Standards Electro |
English PDF |
GB 9706.5-2008 |
Medical electrical equipment - Part 2-1: Particular requirements for the safety of Electron accelerators in the range 1 MeV to 50 MeV 医用电气设备 第2部分:能量为1MeV至50 MeV电子加速器安全专用要求 |
China National Standards Electro |
English PDF |
GB 50472-2008 |
Code for design of Electronic industry clean room 电子工业洁净厂房设计规范 |
China National Standards Electro |
English PDF |
GB 50467-2008 |
Code for construction and acceptance of micro-Electronics manufacturing equipment installation engineering 微电子生产设备安装工程施工及验收规范 |
China National Standards Electro |
English PDF |
GB/T 22571-2008 |
Surface chemical analysis ?X-ray photoElectron spectrometers ?Calibration of energy scales 表面化学分析 X射线光电子能谱仪 能量标尺的校准 |
China National Standards Electro |
English PDF |
GB 15607-2008 |
Safety code for painting - Safety for Electrostatic powder spraying process 涂装作业安全规程 粉末静电喷涂工艺安全 |
China National Standards Electro |
English PDF |
GB/T 19290.3-2008 |
Modular order for the development of mechanical structures for Electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r 发展中的电子设备构体机械结构模数序列 第2-1部分:分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸 |
China National Standards Electro |
English PDF |
GB/T 2900.13-2008 |
Electrotechnical terminology - Dependability and quality of service 电工术语 可信性与服务质量 |
China National Standards Electro |
English PDF |
GB/T 4301-2008 |
Marine Electromagnetic logs 船用电磁计程仪 |
China National Standards Electro |
English PDF |
GB/T 15675-2008 |
Continuously Electrolytically zinc/zinc-nickel alloy coated steel sheet and strip 连续电镀锌、锌镍合金镀层钢板及钢带 |
China National Standards Electro |
English PDF |
GB/T 22451-2008 |
Common requirements of Electromagnetic compatibility for radio communication equipment 无线通信设备电磁兼容性通用要求 |
China National Standards Electro |
English PDF |
GB/T 22450.1-2008 |
Limits and measurement methods of Electromagnetic compatibility for 900/1800MHz TDMA digital cellular telecommunications system - Part 1: Mobile station and ancillary equipment 900/1800MHz TDMA 数字蜂窝移动通信系统电磁兼容性限值和测量方法 第1部分:移动台及其辅助设备 |
China National Standards Electro |
English PDF |
GB/T 5590-2008 |
Low voltage explosion protection Electromagnetic starter for mining 矿用防爆低压电磁起动器 |
China National Standards Electro |
English PDF |
GB/T 18136-2008 |
AC high voltage Electrostatic shielding clothing and test procedure 交流高压静电防护服装及试验方法 |
China National Standards Electro |
English PDF |
GB/T 10066.9-2008 |
Test methods for Electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation 电热装置的试验方法 第9部分:高频介质加热装置输出功率的测定 |
China National Standards Electro |
English PDF |
GB/T 10066.6-2008 |
Test methods for Electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法 |
China National Standards Electro |
English PDF |
GB/T 16841-2008 |
Guide for dosimetry in an Electron beam facility for radiation processing at energies between 300 keV and 25 MeV 能量为 300 keV~25 MeV 电子束辐射加工装置剂量学导则 |
China National Standards Electro |
English PDF |
GB 5959.9-2008 |
Safety in Electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations 电热装置的安全 第9部分:对高频介质加热装置的特殊要求 |
China National Standards Electro |
English PDF |
GB 5959.7-2008 |
Safety in Electroheat installations - Part 7: Particular requirements for installations with electron guns 电热装置的安全 第7部分:对具有电子枪的装置的特殊要求 |
China National Standards Electro |
English PDF |
GB 5959.4-2008 |
Safety in Electroheat installations - Part 4: Particular requirements for safety resistance heating installations 电热装置的安全 第4部分:对电阻加热装置的特殊要求 |
China National Standards Electro |
English PDF |
GB 5959.3-2008 |
Safety in Electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations 电热装置的安全 第3部分:对感应和导电加热装置以及感应熔炼装置的特殊要求 |
China National Standards Electro |
English PDF |
GB 5959.2-2008 |
Safety in Electroheat installations - Part 2: Particular requirements for arc furnace installations 电热装置的安全 第2部分:对电弧炉装置的特殊要求 |
China National Standards Electro |
English PDF |
GB/T 2520-2008 |
Cold-reduced Electrolytic tinplate 冷轧电镀锡钢板及钢带 |
China National Standards Electro |
English PDF |
GB 5237.3-2008 |
Wrought aluminium alloy extruded profiles for architeature - Part 3: Electrophoretic coating profiles 铝合金建筑型材 第3部分:电泳涂漆型材 |
China National Standards Electro |
English PDF |
GB/T 22359-2008 |
Earth-moving machinery - Electromagnetic compatibility 土方机械 电磁兼容性 |
China National Standards Electro |
English PDF |
GB/T 15616-2008 |
Quantitative method for Electron probe microanalysis of metals and alloys 金属及合金的电子探针定量分析方法 |
China National Standards Electro |
English PDF |
GB/T 15247-2008 |
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method 微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法 |
China National Standards Electro |
English PDF |
GB/T 14593-2008 |
Quantitative analysis method of cashmere, wool and their blends - Scanning Electron microscope method 山羊绒、绵羊毛及其混合纤维定量分析方法 扫描电镜法 |
China National Standards Electro |
English PDF |
GB/T 22316-2008 |
Test methods of corrosion resistance for Electrolytic tinplate 电镀锡钢板耐腐蚀性试验方法 |
China National Standards Electro |
English PDF |
GB/T 1838-2008 |
Test methods of tin coating mass for Electrolytic tinplate 电镀锡钢板镀锡量试验方法 |
China National Standards Electro |
English PDF |
GB/T 19267.6-2008 |
Physical and chemical examination of trace evidence in forensic sciences - Part 6:Scanning Electron microscope/ X ray energy dispersive spectrometry 刑事技术微量物证的理化检验 第6部分:扫描电子显微镜/X射线能谱法 |
China National Standards Electro |
English PDF |
GB/T 14913-2008 |
Digital Electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors 直流数字电压表及直流模数转换器 |
China National Standards Electro |
English PDF |
GB/T 6005-2008 |
Test sieves - Metal wire cloth, perforated metal plate and Electroformed sheet - Nominal sizes of openings 试验筛 金属丝编织网、穿孔板和电成型薄板 筛孔的基本尺寸 |
China National Standards Electro |
English PDF |
GB/T 22196-2008 |
Electrical installations in ships - System design - Electric and Electrohydraulic steering gear 船舶电气设备 系统设计 电动和电动液压操舵装置 |
China National Standards Electro |
English PDF |
GB/T 2613-2008 |
Electronic instrument general technical specification for industria-process measurement and control system 工业过程测量和控制系统用电动仪表通用技术条件 |
China National Standards Electro |
English PDF |
GB/T 10992.3-2008 |
Electrostatic copying machines - Part 3: Engineering copiers 静电复印机 第3部分:工程图纸复印机 |
China National Standards Electro |
English PDF |
GB/T 10992.2-2008 |
Electrostatic copying machines - Part 2: Potable copiers 静电复印机 第2部分:便携式复印机 |
China National Standards Electro |
English PDF |
GB/T 10992.1-2008 |
Electrostatic Copying Machines - Part 1: Document Copiers 静电复印机 第1部分:文件复印机 |
China National Standards Electro |
English PDF |
GB/T 10073-2008 |
Methods of evaluation for image quality of Electrostatic copes 静电复印品图像质量评价方法 |
China National Standards Electro |
English PDF |
GB/T 2900.26-2008 |
Electrotechnical terminology - Electrical machine for automatic control system 电工术语 控制电机 |
China National Standards Electro |
English PDF |
GB/T 17215.311-2008 |
Electricity metering equipment(a.c) - Particular Requirements - Part 11: Electromechanical meter for active energy(classes0.5、1and2) 交流电测量设备 特殊要求 第11部分:机电式有功电能表(0.5、1和2级) |
China National Standards Electro |
English PDF |
GB/T 16826-2008 |
Electro-hydraulic servo universal testing machines 电液伺服万能试验机 |
China National Standards Electro |
English PDF |
GB/T 16491-2008 |
Electronic universal testing machines 电子式万能试验机 |
China National Standards Electro |
English PDF |
GB/T 11007-2008 |
Test method of Electrolytic conductivity analyzers 电导率仪试验方法 |
China National Standards Electro |
English PDF |
GB/T 22104-2008 |
Soil quality - Analysis of fluoride - Ion selective Electrometry 土壤质量 氟化物的测定 离子选择电极法 |
China National Standards Electro |
English PDF |
GB/T 18654.13-2008 |
Inspection of germplasm for cultured fishes - Part 13:Analysis of isozyme Electrophoresis 养殖鱼类种质检验 第13部分:同工酶电泳分析 |
China National Standards Electro |
English PDF |
GB/T 8110-2008 |
Welding Electrodes and rods for gas shielding arc welding of carbon and low alloy steel 气体保护电弧焊用碳钢、低合金钢焊丝 |
China National Standards Electro |
English PDF |
GB/T 22085.2-2008 |
Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2:Aluminium and its weldable alloys 电子束及激光焊接接头 缺欠质量分级指南 第2部分:铝及铝合金 |
China National Standards Electro |
English PDF |
GB/T 22085.1-2008 |
Electron and laser beam welded joints - Guidance on quality levels for imperfactions - Part 1:Steel 电子束及激光焊接接头 缺欠质量分级指南 第1部分:钢 |
China National Standards Electro |
English PDF |
GB/T 17493-2008 |
Low alloy steel flux cored Electrodes for arc welding 低合金钢药芯焊丝 |
China National Standards Electro |
English PDF |
GB/T 22094-2008 |
Height measuring instrument with Electronic digital display 电子数显测高仪 |
China National Standards Electro |
English PDF |
GB/T 22093-2008 |
Internal micrometer with Electronic digital display 电子数显内径千分尺 |
China National Standards Electro |
English PDF |
GB/T 22092-2008 |
Fixed micrometer and depth micrometer with Electronic digital display 电子数显测微头和深度千分尺 |
China National Standards Electro |
English PDF |
GB/T 16285-2008 |
Detrmination of glucose in food - Enzyme - Colorimetric method and enzyme - Electrode method 食品中葡萄糖的测定 酶-比色法和酶-电极法 |
China National Standards Electro |
English PDF |
GB/T 16818-2008 |
Specifications for short to medium ranges Electro-optical distance measurements 中、短程光电测距规范 |
China National Standards Electro |
English PDF |
GB 19436.3-2008 |
Electrical safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection(AOPDDR) 机械电气安全 电敏防护装置 第3部分:使用有源光电漫反射防护器件(AOPDDR)设备的特殊要求 |
China National Standards Electro |
English PDF |
Find out:2457Items | To Page of: First -Previous-Next -Last | [12] [13] [14] [15] [16] [17] [18] |