Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44157-2024 |
Requirements for treatment and disPOSal of waste circuit boards 废电路板处理处置要求 |
China National Standards POS |
 English PDF |
| GB/T 28294-2024 |
Steel slag comPOSites 钢铁渣复合料 |
China National Standards POS |
English PDF |
| GB/T 5270-2024 |
Metallic coatings on metal substrates - ElectrodePOSited and chemically deposited layers - Review of adhesion strength test methods 金属基体上的金属覆盖层-电沉积和化学沉积层-附着强度试验方法评述 |
China National Standards POS |
English PDF |
| GB-15979-2024 |
Sanitary requirements for disPOSable sanitary products 一次性使用卫生用品卫生要求 |
China National Standards POS |
English PDF |
| GB/T 44037-2024 |
Test methods for coke dissolution rate and POSt-dissolution strength 焦炭溶损率及溶损后强度试验方法 |
China National Standards POS |
English PDF |
| GB/T 17699.2-2024 |
Electronic data exchange for administration, commerce and transportation-Part 2: ComPOSite data element directory 行政、商业和运输业电子数据交换-第2部分：复合数据元目录 |
China National Standards POS |
English PDF |
| GB/T 44110-2024 |
Satellite navigation POSitioning sounding system - Ground receiver 卫星导航定位探空系统-地面接收机 |
China National Standards POS |
English PDF |
| GB/T 44068-2024 |
LTE mobile Technical requirements for communication terminals supporting Beidou POSitioning LTE移动通信终端支持北斗定位的技术要求 |
China National Standards POS |
English PDF |
| GB-44023-2024 |
Rubber comPOSite hose for internal connection of gas appliances 燃气用具连接内用橡胶复合软管 |
China National Standards POS |
English PDF |
| GB/T 14408-2024 |
Low-alloy steel castings for general engineering and structural purPOSes 一般工程与结构用低合金钢铸件 |
China National Standards POS |
English PDF |
| GB/T 17937-2024 |
Aluminum clad steel wire for electrical purPOSes 电工用铝包钢线 |
China National Standards POS |
English PDF |
| GB/T 29324-2024 |
Carbon fiber reinforced comPOSite cores for overhead wires 架空导线用碳纤维增强复合材料芯 |
China National Standards POS |
English PDF |
| GB/T 43926-2024 |
Technical specifications for POSt-accident status assessment of oil and gas pipelines 油气输送管道事故后状态评估技术规范 |
China National Standards POS |
English PDF |
| GB/T 43938.1-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced comPOSite materials-Part 1: Tensile test 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards POS |
English PDF |
| GB/T 43938.2-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced comPOSite materials-Part 2: Compression test 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards POS |
English PDF |
| GB/T 43964-2024 |
Home Technical requirements for over-the-air download (OTA) of electric automatic controllers for use with and similar purPOSes 家用和类似用途电自动控制器空中下载（OTA）技术要求 |
China National Standards POS |
English PDF |
| GB/T 8492-2024 |
General PurPOSe Heat-resistant Steel and Alloy Castings 一般用途耐热钢及合金铸件 |
China National Standards POS |
English PDF |
| GB/T 43658.2-2024 |
Non-destructive testing - X-ray and gamma-ray testing of pipeline corrosion and dePOSits - Part 2: Double-wall radiography 无损检测-管道腐蚀及沉积物X和伽马射线检测-第2部分：双壁射线检测 |
China National Standards POS |
English PDF |
| GB/T 43658.1-2024 |
Non-destructive testing - X-ray and gamma-ray testing of pipeline corrosion and dePOSits - Part 1: Tangential radiography 无损检测-管道腐蚀及沉积物X和伽马射线检测-第1部分：切向射线检测 |
China National Standards POS |
English PDF |
| GB/T 23897-2024 |
POSt-harvest treatment of major cut flower products Technical regulations for management 主要切花产品采后处理技术规程 |
China National Standards POS |
English PDF |
| GB/T 43765-2024 |
Aerospace functional coating-Partial reinforced metal matrix comPOSite welding coating 航天功能镀覆层-颗粒增强金属基复合材料焊接镀覆层 |
China National Standards POS |
English PDF |
| GB/T 43686-2024 |
Guidelines for POSt-evaluation of electrochemical energy storage power plants 电化学储能电站后评价导则 |
China National Standards POS |
English PDF |
| GB/T 43601-2024 |
Mobile lifting work platform-Operator control Control device - operating force, operating direction, operating POSition and operating method 移动式升降工作平台-操作人员控制装置-操作力、操作方向、操作位置和操作方法 |
China National Standards POS |
English PDF |
| GB/T 43659-2024 |
Metallic and other inorganic coatings-electrodePOSited nickel-ceramic composite coatings 金属及其他无机覆盖层-电沉积镍-陶瓷复合镀层 |
China National Standards POS |
English PDF |
| GB/T 43852-2024 |
Steel reinforced plastic comPOSite pressure pipe for hot and cold water 冷热水用钢增强塑料复合压力管 |
China National Standards POS |
English PDF |
| GB/T 43725-2024 |
Test methods for POSitive photoresist materials for flat panel display arrays 直写成像式曝光设备 |
China National Standards POS |
English PDF |
| GB/T 43724-2024 |
Direct-write imaging exPOSure equipment 单体液晶测试方法 |
China National Standards POS |
English PDF |
| GB/T 21711.201-2024 |
Technical specifications for the coordinated disPOSal of solid waste in cement kilns 基础机电继电器-第2-1部分：可靠性-B10值验证程序 |
China National Standards POS |
English PDF |
| GB/T 43673-2024 |
Non-metallic cable-laid comPOSite continuous oil pipe 非金属敷缆复合连续油管 |
China National Standards POS |
English PDF |
| GB/T 43672-2024 |
Operation procedures for permanent sealing and disPOSal of abandoned wells in oil and gas field exploitation 油气田开采废弃井永久性封井处置作业规程 |
China National Standards POS |
English PDF |
| GB/T 43615-2023 |
Additive manufacturing Ultrasonic testing method of directed energy dePOSition metal forming parts 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards POS |
English PDF |
| GB/T 43614-2023 |
Additive Manufacturing Metal Powder Directional Energy DePOSition Equipment Laser Cladding Head Test Method 增材制造 金属粉末定向能量沉积设备激光熔覆头测试方法 |
China National Standards POS |
English PDF |
| GB/T 43602-2023 |
ComPOSition, structure and performance evaluation of physical vapor deposition multi-layer hard coatings 物理气相沉积多层硬质涂层的成分、结构及性能评价 |
China National Standards POS |
English PDF |
| GB/T 43585-2023 |
disPOSable tampons 一次性卫生棉条 |
China National Standards POS |
English PDF |
| GB/T 43580-2023 |
Blockchain and Distributed Accounting Technology General Service Guide for Certificate DePOSits 区块链和分布式记账技术 存证通用服务指南 |
China National Standards POS |
English PDF |
| GB/T 43552-2023 |
Comfort fans and their speed regulators for household and similar purPOSes - Performance test methods 家用和类似用途舒适风扇及其调速器 性能测试方法 |
China National Standards POS |
English PDF |
| GB/T 43497-2023 |
ElectrodePOSition layer and related finishing Electroless nickel phosphorus-ceramic composite coating 电沉积层及相关精饰 化学镀镍磷-陶瓷复合镀层 |
China National Standards POS |
English PDF |
| GB/T 23307-2023 |
Floor sockets for household and similar purPOSes 家用和类似用途地面插座 |
China National Standards POS |
English PDF |
| GB/T 20317-2023 |
Melt extrusion dePOSition forming machine tool accuracy inspection 熔融挤出沉积成形机床 精度检验 |
China National Standards POS |
English PDF |
| GB/T 7000.204-2023 |
Luminaires Part 2-4: Special requirements for portable general purPOSe luminaires 灯具 第2-4部分：特殊要求 可移式通用灯具 |
China National Standards POS |
English PDF |
| GB/T 7000.201-2023 |
Luminaires Part 2-1: Special requirements Fixed general purPOSe luminaires 灯具 第2-1部分：特殊要求 固定式通用灯具 |
China National Standards POS |
English PDF |
| GB 19082-2023 |
Medical disPOSable protective clothing 医用一次性防护服 |
China National Standards POS |
English PDF |
| GB 175-2023 |
General PurPOSe Portland Cement 通用硅酸盐水泥 |
China National Standards POS |
English PDF |
| GB/T 43286-2023 |
DisPOSable sampling tube (inactivated type) 一次性采样管（灭活型） |
China National Standards POS |
English PDF |
| GB/T 43418-2023 |
Method for testing the comPOSition of flax fiber 亚麻纤维组成成分的检测方法 |
China National Standards POS |
English PDF |
| GB/T 26330-2023 |
Silver, silver alloy/copper, copper alloy comPOSite strip 银、银合金/铜、铜合金复合带材 |
China National Standards POS |
English PDF |
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomPOSition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards POS |
English PDF |
| GB/T 43288-2023 |
Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and comPOSition control. 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 |
China National Standards POS |
English PDF |
| GB/T 43282.2-2023 |
Plastics. Determination of aerobic biodegradation of plastic materials exPOSed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法 |
China National Standards POS |
English PDF |
| GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exPOSed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 |
China National Standards POS |
English PDF |
| GB/T 26029-2023 |
Nickel, cobalt and manganese three-element comPOSite oxide 镍钴锰三元素复合氧化物 |
China National Standards POS |
English PDF |
| GB/T 29419-2023 |
Performance of wood plastic comPOSite decking, guardrails and fencing systems 塑木复合材料铺板、护栏和围栏体系性能 |
China National Standards POS |
English PDF |
| GB/T 29418-2023 |
Test method for performance of wood-plastic comPOSite extruded profiles 塑木复合材料挤出型材性能测试方法 |
China National Standards POS |
English PDF |
| GB/T 4541-2023 |
Marine life-saving equipment POSition indicator light 船用救生设备示位灯 |
China National Standards POS |
English PDF |
| GB/T 12538-2023 |
Road vehicles - Determination of center of mass POSition 道路车辆 质心位置的测定 |
China National Standards POS |
English PDF |
| GB/T 25774.1-2023 |
Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy dePOSited metals 焊接材料的检验 第1部分： 钢、镍及镍合金熔敷金属力学性能试样的制备 |
China National Standards POS |
English PDF |
| GB/T 43409-2023 |
Metallographic examination of carbon steel and low alloy steel castings for general engineering and structural purPOSes 一般工程与结构用碳钢及低合金钢铸件金相检验 |
China National Standards POS |
English PDF |
| GB 29923-2023 |
National Food Safety Standard Good Manufacturing Practice for Formulas for Special Medical PurPOSes 食品安全国家标准 特殊医学用途配方食品良好生产规范 |
China National Standards POS |
English PDF |
| GB 4806.13-2023 |
National food safety standards ComPOSite materials and products for food contact 食品安全国家标准 食品接触用复合材料及制品 |
China National Standards POS |
English PDF |
| GB/Z 43194-2023 |
Group Standards Involving Patent DisPOSal Guidelines 团体标准涉及专利处置指南 |
China National Standards POS |
English PDF |
| GB/T 43227-2023 |
Test method for vapor-dePOSited protective films for inner leads of integrated circuits for aerospace use 宇航用集成电路内引线气相沉积保护膜试验方法 |
China National Standards POS |
English PDF |
| GB/T 43224-2023 |
Detailed requirements for launch vehicle orbital stage disPOSal 运载火箭轨道级处置详细要求 |
China National Standards POS |
English PDF |
| GB/T 43140-2023 |
Laser directed energy dePOSition machine tools General technical specifications 激光定向能量沉积机床 通用技术规范 |
China National Standards POS |
English PDF |
| GB/T 43118-2023 |
Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of dePOSits of salt, ash or other substances 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 |
China National Standards POS |
English PDF |
| GB/T 43116-2023 |
Fiber Reinforced Plastic ComPOSites Composite Standard Certification Scheme including Reduced and Extended Certification 纤维增强塑料复合材料 包括缩减和扩展认证的复合材料标准认证方案 |
China National Standards POS |
English PDF |
| GB/T 43113-2023 |
Evaluation method for heat and moisture resistance of carbon fiber reinforced comPOSite materials 碳纤维增强复合材料耐湿热性能评价方法 |
China National Standards POS |
English PDF |
| GB/T 43109-2023 |
Stainless steel comPOSite steel plates for shipbuilding and offshore engineering 船舶及海洋工程用不锈钢复合钢板 |
China National Standards POS |
English PDF |
| GB/T 43100-2023 |
Thermal Spraying POSt-processing and finishing of thermal spray coatings 热喷涂 热喷涂涂层的后处理和精加工 |
China National Standards POS |
English PDF |
| GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface POSition in cross-sectional images of layered materials 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards POS |
English PDF |
| GB/T 43005-2023 |
Continuous fiberglass tape wrapped reinforced polyethylene comPOSite pipe for water supply 给水用连续玻纤带缠绕增强聚乙烯复合管 |
China National Standards POS |
English PDF |
| GB/T 42979-2023 |
Global Navigation Satellite System (GNSS) POSition reporting/short message terminal performance requirements and test methods 全球卫星导航系统（GNSS）位置报告/短报文型终端性能要求及测试方法 |
China National Standards POS |
English PDF |
| GB/T 42710.2-2023 |
DC plugs and sockets for household and similar purPOSes Part 2: Types and dimensions 家用和类似用途直流插头插座 第2部分：型式尺寸 |
China National Standards POS |
English PDF |
| GB/T 42710.1-2023 |
DC plugs and socket-outlets for household and similar purPOSes Part 1: General requirements 家用和类似用途直流插头插座 第1部分：通用要求 |
China National Standards POS |
English PDF |
| GB/T 31101-2023 |
Information technology Real-time POSitioning system performance testing method 信息技术 实时定位系统性能测试方法 |
China National Standards POS |
English PDF |
| GB/T 30307-2023 |
Drinking water treatment equipment for domestic and similar purPOSes 家用和类似用途饮用水处理装置 |
China National Standards POS |
English PDF |
| GB/T 26949.21-2023 |
Industrial vehicle stability verification Part 21: Picking vehicles with operator POSition lifting height greater than 1 200 mm 工业车辆 稳定性验证 第21部分：操作者位置起升高度大于1 200 mm的拣选车 |
China National Standards POS |
English PDF |
| GB/T 26518-2023 |
Polymer reinforced comPOSite waterproof sheet 高分子增强复合防水片材 |
China National Standards POS |
English PDF |
| GB/T 19675.2-2023 |
Flexible graphite comPOSite reinforced gasket for pipe flanges Part 2: Class series 管法兰用柔性石墨复合增强垫片 第2部分：Class系列 |
China National Standards POS |
English PDF |
| GB/T 19675.1-2023 |
Flexible graphite comPOSite reinforced gaskets for pipe flanges Part 1: PN series 管法兰用柔性石墨复合增强垫片 第1部分：PN系列 |
China National Standards POS |
English PDF |
| GB/T 19258.2-2023 |
Sources of ultraviolet radiation for germicidal purPOSes Part 2: Cold cathode low pressure mercury vapor discharge lamps 杀菌用紫外辐射源 第2部分：冷阴极低气压汞蒸气放电灯 |
China National Standards POS |
English PDF |
| GB/T 19214.1-2023 |
Electrical accessories Residual current monitors (RCM) Part 1: Residual current monitors for household and similar purPOSes 电器附件 剩余电流监视器（RCM） 第1部分：家用和类似用途剩余电流监视器 |
China National Standards POS |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exPOSure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards POS |
English PDF |
| GB/T 1458-2023 |
Test method for mechanical properties of fiber-wound reinforced comPOSite ring specimens 纤维缠绕增强复合材料环形试样力学性能试验方法 |
China National Standards POS |
English PDF |
| GB/T 10802-2023 |
General purPOSe flexible polyurethane foam 通用软质聚氨酯泡沫塑料 |
China National Standards POS |
English PDF |
| GB/T 42911-2023 |
Carbon fiber reinforced comPOSite materials accelerated moisture absorption and supersaturation adjustment method for sealed pressure vessels 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法 |
China National Standards POS |
English PDF |
| GB/T 12971.2-2023 |
Contact wires for electric traction Part 2: Steel and aluminum comPOSite contact wires 电力牵引用接触线 第2部分：钢铝复合接触线 |
China National Standards POS |
English PDF |
| GB/T 22648-2023 |
Aluminum-plastic comPOSite hose, aluminum foil for battery soft packaging 铝塑复合软管、电池软包用铝箔 |
China National Standards POS |
English PDF |
| GB/T 3620.2-2023 |
Allowable deviations in chemical comPOSition of titanium and titanium alloy processed products 钛及钛合金加工产品化学成分允许偏差 |
China National Standards POS |
English PDF |
| GB/T 29918-2023 |
Test method for pressure-comPOSition isotherm (PCI) of rare earth hydrogen storage alloys 稀土系储氢合金 压力-组成等温线（PCI）的测试方法 |
China National Standards POS |
English PDF |
| GB/T 18887-2023 |
Geosynthetics Woven/nonwoven comPOSite geotextiles 土工合成材料 机织/非织造复合土工布 |
China National Standards POS |
English PDF |
| GB/T 42655-2023 |
Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix comPOSites 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 |
China National Standards POS |
English PDF |
| GB/T 42672-2023 |
Corrosion of metals and alloys - Methods for monitoring environmental factors in surface seawater exPOSure tests 金属和合金的腐蚀 表层海水暴露试验环境因素监测方法 |
China National Standards POS |
English PDF |
| GB/T 5776-2023 |
Corrosion of metals and alloys Guidelines for exPOSure and evaluation of metals and alloys in surface seawater 金属和合金的腐蚀 金属和合金在表层海水中暴露和评定的导则 |
China National Standards POS |
English PDF |
| GB/T 42827-2023 |
Performance test methods for AC ventilating fans and their speed regulators for household and similar purPOSes 家用和类似用途的交流换气扇及其调速器 性能测试方法 |
China National Standards POS |
English PDF |
| GB/T 26176-2023 |
Soymilk Makers for Household and Similar PurPOSes 家用和类似用途豆浆机 |
China National Standards POS |
English PDF |
| GB/T 17421.2-2023 |
General Principles for Machine Tool Inspection Part 2: Determination of POSitioning Accuracy and Repeatable Positioning Accuracy of CNC Axis 机床检验通则 第2部分：数控轴线的定位精度和重复定位精度的确定 |
China National Standards POS |
English PDF |
| GB/T 42924.4-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomPOSition method using a cone corrosion meter. 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 |
China National Standards POS |
English PDF |
| GB/T 42920-2023 |
Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic comPOSites 塑料 纤维增强塑料复合材料耐火特性和防火性能的评定 |
China National Standards POS |
English PDF |
| GB/T 42730-2023 |
Ergonomics Static work POSture assessment 人类工效学 静态工作姿势评估 |
China National Standards POS |
English PDF |
| GB 18671-2009 |
DisPOSable intravenous infusion needle "No. 1 Amendment" 一次性使用静脉输液针《第1号修改单》 |
China National Standards POS |
English PDF |
| Find out:1426Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
+86-755-25831330
