GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 10757-2011 |
Terminology of POStal industry 邮政业术语 |
China National Standards POS |
English PDF |
GB/T 26518-2011 |
Reinforced and comPOSite polymeric sheets for water proof 高分子增强复合防水片材 |
China National Standards POS |
English PDF |
GB/T 14406-2011 |
Gantry crane for general purPOSe 通用门式起重机 |
China National Standards POS |
English PDF |
GB/T 14405-2011 |
Bridge crane for general purPOSe 通用桥式起重机 |
China National Standards POS |
English PDF |
GB/T 26459-2011 |
Pulp, paper and board - Determination of the POSt color number 纸、纸板和纸浆 返黄值的测定 |
China National Standards POS |
English PDF |
GB/T 26314-2010 |
Designation and comPOSition of zirconium and zirconium alloys 锆及锆合金牌号和化学成分 |
China National Standards POS |
English PDF |
GB/T 26305-2010 |
The method for chemical of nickel oxide - Determination of nickel content - Electrolytic dePOSitiono method 氧化镍化学分析方法 镍量的测定 电沉积法 |
China National Standards POS |
English PDF |
GB/T 26300-2010 |
Nickel cobalt manganese comPOSite hydroxide 镍、钴、锰三元素复合氢氧化物 |
China National Standards POS |
English PDF |
GB/Z 26139-2010 |
Earth-moving machinery - Guidelines for assessment of exPOSure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers 土方机械 驾乘式机器暴露于全身振动的评价指南 国际协会、组织和制造商所测定协调数据的应用 |
China National Standards POS |
English PDF |
GB 26447-2010 |
Transport of dangerous goods - Classification procedures,test methods relating to ammonium nitrate fertilizers capable of self-sustaining decomPOSition 危险货物运输 能够自持分解的硝酸铵化肥的分类程序、试验方法和判据 |
China National Standards POS |
English PDF |
GB/T 26258-2010 |
Technical requirements of environmentally innocuous disPOSal for hazardous substances in disused telecommunication equipment 废弃通信产品有毒有害物质环境无害化处理技术要求 |
China National Standards POS |
English PDF |
GB/T 26196-2010 |
Fireworks and firecrackers - Determination of carbon content in pyrotechnic comPOSitions - High frequency-infrared absorption method 烟花爆竹 烟火药中碳含量的测定 高频-红外吸收法 |
China National Standards POS |
English PDF |
GB/T 26195-2010 |
Fireworks and firecracker - Determination of arsenic in pyrotechnic comPOSition 烟花爆竹 烟火药中砷的测定 |
China National Standards POS |
English PDF |
GB/T 15814.1-2010 |
Fireworks and firecracker - Qualitative determination of pyrotechnic comPOSitions 烟花爆竹烟火药成分定性测定 |
China National Standards POS |
English PDF |
GB 25906.5-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 48 Dot matrix fonts - Part 5: Zouzhe Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第5部分:奏折体 |
China National Standards POS |
English PDF |
GB 25906.4-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 48 Dot matrix fonts - Part 4: Xingshu Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第4部分:行书体 |
China National Standards POS |
English PDF |
GB 25906.3-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 48 Dot matrix fonts - Part 3: Dahei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第3部分:大黑体 |
China National Standards POS |
English PDF |
GB 25906.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 48 Dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第2部分:正黑体 |
China National Standards POS |
English PDF |
GB 25906.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 48 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第1部分:正白体 |
China National Standards POS |
English PDF |
GB 25905.2-2010 |
Information technology - universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 32 dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 32点阵字型 第2部分:正黑体 |
China National Standards POS |
English PDF |
GB 25905.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 32 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 32点阵字型 第1部分:正白体 |
China National Standards POS |
English PDF |
GB 25904.3-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 24 Dot matrix fonts - Part 3: Zouzhe Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第3部分:奏折体 |
China National Standards POS |
English PDF |
GB 25904.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 24 Dot matrix fonts - Part 2: Xingshu Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第2部分:行书体 |
China National Standards POS |
English PDF |
GB 25904.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 24 Dot matrix fonts - Part 1: Dahei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第1部分:大黑体 |
China National Standards POS |
English PDF |
GB 25903.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 16 Dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第2部分:正黑体 |
China National Standards POS |
English PDF |
GB 25903.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and comPOSite characters - 16 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第1部分:正白体 |
China National Standards POS |
English PDF |
GB/T 26106-2010 |
Mechanically dePOSited coatings of zinc - Specification and test methods 机械镀锌层 技术规范和试验方法 |
China National Standards POS |
English PDF |
GB/T 26061-2010 |
Tantalum-niobium comPOSite carbides 钽铌复合碳化物 |
China National Standards POS |
English PDF |
GB/T 26054-2010 |
Reproduced comPOSition powder of cemented carbide 硬质合金再生混合料 |
China National Standards POS |
English PDF |
GB/T 26029-2010 |
Nickel cobalt manganese comPOSite oxide 镍、钴、锰三元素复合氧化物 |
China National Standards POS |
English PDF |
GB/T 17793-2010 |
Wrought copper and copper alloy plate,sheet and strip for general purPOSes - Dimensions and tolerances 加工铜及铜合金板带材 外形尺寸及允许偏差 |
China National Standards POS |
English PDF |
GB/T 25854-2010 |
Forged shackles for general lifting purPOSes - Dee shackles and bow shackles 一般起重用D形和弓形锻造卸扣 |
China National Standards POS |
English PDF |
GB/T 25976-2010 |
Ship and marine technology - POSition-indicating lights for life-saving appliances - Testing,inspection and marking of production units 船舶和海上技术 救生设备示位灯 产品的试验、检查和标志 |
China National Standards POS |
English PDF |
GB/T 25897-2010 |
Superconductivity: Residual resistance ratio measurement of Nb-Ti comPOSite superconductors 超导电性:铌-酞复合超导体剩余电阻比测定 |
China National Standards POS |
English PDF |
GB/T 25829-2010 |
Permissisible variations for chemical comPOSition of superalloy products 高温合金成品化学成分允许偏差 |
China National Standards POS |
English PDF |
GB/T 25777-2010 |
Preparation methods for dePOSited metal specimens of chemical analysis 焊接材料熔敷金属化学分析试样制备方法 |
China National Standards POS |
English PDF |
GB/T 25774.1-2010 |
Test methods for welding consumables - Part 1: Preparation and testing of dePOSited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验 |
China National Standards POS |
English PDF |
GB/T 25725-2010 |
Special purPOSe vehicle for live working tools 带电作业工具专用车 |
China National Standards POS |
English PDF |
GB/T 25494-2010 |
Test methods for comPOSition analysis of getters 吸气剂成分分析测试方法 |
China National Standards POS |
English PDF |
GB/T 15952-2010 |
Electroacoustics - Specifications for personal sound exPOSure meters 电声学 个人声暴露计规范 |
China National Standards POS |
English PDF |
GB/T 25615-2010 |
Earth-moving machinery - Determination of emission sound pressure level at operator’s POSition - Dynamic test conditions 土方机械 司机位置发射声压级的测定 动态试验条件 |
China National Standards POS |
English PDF |
GB/T 25613-2010 |
Earth-moving machinery - Determination of emission sound pressure level at operator’s POSition - Stationary test conditions 土方机械 司机位置发射声压级的测定 定置试验条件 |
China National Standards POS |
English PDF |
GB/T 25312-2010 |
The standardization for the evaluation of welder exPOSure to electromagnetic field of welding equipment 焊接设备电磁场对操作人员影响程度的评价准则 |
China National Standards POS |
English PDF |
GB/T 25303-2010 |
Specification for high efficiency permanent magnet synchronous motor for textile purPOSe(Frame size 90~225) 纺织专用高效率永磁同步电动机技术条件 (机座号 90~225) |
China National Standards POS |
English PDF |
GB/T 25302-2010 |
Specification for high efficiency three-phase induction motor for textile purPOSe (Frame size 90~225) 纺织专用高效率三相异步电动机技术条件 (机座号90~225) |
China National Standards POS |
English PDF |
GB/T 25357-2010 |
Petroleum, petrochemical and natural gas industries - Process POSitive-displacement rotary-type compressors 石油、石化及天然气工业流程用容积式回转压缩机 |
China National Standards POS |
English PDF |
GB/T 18400.5-2010 |
Test conditions for machining centres - Part 5: Accuracy and repeatability of POSitioning of work-holding pallets 加工中心检验条件 第5部分:工件夹持托板的定位精度和重复定位精度检验 |
China National Standards POS |
English PDF |
GB/T 18400.4-2010 |
Test conditions for machining centres - Part 4: Accuracy and repeatability of POSitioning of linear and rotary axes 加工中心检验条件 第4部分:线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards POS |
English PDF |
GB 50634-2010 |
Code for design of industrial waste comPOSition in cement kiln 水泥窑协同处置工业废物设计规范(2015年版) |
China National Standards POS |
English PDF |
GB/T 25031-2010 |
DisPOSal of sludge from municipal wastewater treatment plant - Quality of sludge used in making brick 城镇污水处理厂污泥处置 制砖用泥质 |
China National Standards POS |
English PDF |
GB/T 25102.4-2010 |
Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purPOSes - Magnetic field strength 电声学 助听器 第4部分:助听器用感应回路系统磁场强度 |
China National Standards POS |
English PDF |
GB/T 25096-2010 |
ComPOSite station post insulators for substations with AC voltages greater than 1000V - Definitions,test methods and acceptance riteria 交流电压高于1000V变电站用电站支柱复合绝缘子 定义、试验方法及接收准则 |
China National Standards POS |
English PDF |
GB/T 7324-2010 |
General purPOSe lithium lubricating grease 通用锂基润滑脂 |
China National Standards POS |
English PDF |
GB/T 25073-2010 |
Micrographics - Colour microfilm - Application of the exPOSure technique to prepare line originals and continuous-tone originals 缩微摄影技术 彩色缩微胶片 曝光技术及与之相适应的线条原件和连续色调原件的制备 |
China National Standards POS |
English PDF |
GB/T 25072-2010 |
Micrographics - Microfilming of newspapers for archival purPOSes on 35 mm microfilm 缩微摄影技术 在35mm缩微胶片上拍摄存档报纸 |
China National Standards POS |
English PDF |
GB/T 13670-2010 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exPOSed in railway vehicles 机械振动 铁道车辆内乘客及乘务员暴露于全身振动的测量与分析 |
China National Standards POS |
English PDF |
GB 50608-2010 |
Technical code for infrastructure application of FRP comPOSites 纤维增强复合材料建设工程应用技术规范 |
China National Standards POS |
English PDF |
GB/T 24976.7-2010 |
Guide of environmental design for electrical accessories - Part 7: Connecting devices for low-voltage circuits for household and similar purPOSes 电器附件环境设计导则 第7部分:家用和类似用途低压电器用连接器件 |
China National Standards POS |
English PDF |
GB/T 24976.6-2010 |
Guide of environmental design for electrical accessories - Part 6: Appliance couplers for household and similar purPOSes 电器附件环境设计导则 第6部分:家用和类似用途的器具耦合器 |
China National Standards POS |
English PDF |
GB/T 24976.5-2010 |
Guide of environmental design for electrical accessories - Part 5: Plugs and socket-outlets for household and similar purPOSes 电器附件环境设计导则 第5部分:家用和类似用途插头插座 |
China National Standards POS |
English PDF |
GB/T 24976.4-2010 |
Guide of environmental design for electrical accessories - Part 4: Plugs, socket-outlets and couplers for industrial purPOSes 电器附件环境设计导则 第4部分:工业用插头插座和耦合器 |
China National Standards POS |
English PDF |
GB/T 24976.3-2010 |
Guide of environmental design for electrical accessories - Part 3: Cable reels for household application and similar purPOSes 电器附件环境设计导则 第3部分:家用和类似用途电缆卷盘 |
China National Standards POS |
English PDF |
GB/T 24967-2010 |
Impact elastic wave - based embedding depth measurement apparatus for steel guard rail POSt 钢质护栏立柱埋深冲击弹性波检测仪 |
China National Standards POS |
English PDF |
GB/T 50602-2010 |
Radiographic testing standard for a single exPOSure with γ-ray technique of spherical tank installation 球形储罐γ射线全景曝光现场检测标准 |
China National Standards POS |
English PDF |
GB/T 24894-2010 |
Animal and vegetable fats and oils - Determination of the ComPOSition of fatty acids in the 2-position of the triglyceride molecules 动植物油脂 甘三酯分子2-位脂肪酸组分的测定 |
China National Standards POS |
English PDF |
GB/T 50553-2010 |
Design document comPOSe standard of coal preparation plant project in coal industry 煤炭工业选煤厂工程建设项目设计文件编制标准 |
China National Standards POS |
English PDF |
GB/T 24816-2009 |
Short link chain for lifting purPOSes - Grade 8,non-calibrated,for chain slings etc. 起重用短环链 吊链等用8级普通精度链 |
China National Standards POS |
English PDF |
GB/T 24815-2009 |
Short link chain for lifting purPOSes - Grade 6,non-calibrated,for chain slings etc. 起重用短环链 吊链等用6级普通精度链 |
China National Standards POS |
English PDF |
GB/T 24814-2009 |
Short link chain for lifting purPOSes - Grade 4,non-calibrated,for chain slings etc. 起重用短环链 吊链等用4级普通精度链 |
China National Standards POS |
English PDF |
GB/Z 24839-2009 |
Technical specification of POSt insulators for 1000kV a.c. system 1000kV交流系统用支柱绝缘子技术规范 |
China National Standards POS |
English PDF |
GB/T 17126.2-2009 |
Agricultural tractors and machinery - Power take-off drive shafts and power-input connection - Part 2:Specification for use of PTO drive shaft, and POSition and clearance of PTO drive line and PIC for various attachments 农业拖拉机和机械 动力输出万向节传动轴和动力输入连接装置 第2部分:动力输出万向节传动轴使用规范、各类联接装置用动力输出传动系和动力输入连接装置位置及间隙范围 |
China National Standards POS |
English PDF |
GB 14391-2009 |
Technical requirements for satellite emergency POSition-indicating radio beacons 卫星紧急无线电示位标性能要求 |
China National Standards POS |
English PDF |
GB/T 24602-2009 |
DisPOSal of sludge from municipal wastewater treatment plant - Quality of sludge used in separate incineration 城镇污水处理厂污泥处置 单独焚烧用泥质 |
China National Standards POS |
English PDF |
GB/T 24600-2009 |
DisPOSal of sludge from municipal wastewater treatment plant - Quality of sludge used in land improvement 城镇污水处理厂污泥处置 土地改良用泥质 |
China National Standards POS |
English PDF |
GB/T 24517-2009 |
Corrosion of metals and alloys - Outdoors exPOSure test methods for periodic water spray 金属和合金的腐蚀 户外周期喷淋暴露试验方法 |
China National Standards POS |
English PDF |
GB/T 24516.2-2009 |
Corrosion of metals and alloys - Atmospheric corrosion - Sun tracking exPOSure test methods 金属和合金的腐蚀 大气腐蚀 跟踪太阳暴露试验方法 |
China National Standards POS |
English PDF |
GB/T 24514-2009 |
Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical comPOSition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry 钢表面锌基和(或)铝基镀层 单位面积镀层质量和化学成分测定 重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法 |
China National Standards POS |
English PDF |
GB/T 16762-2009 |
Wire rope slings for general purPOSes-characteristics and technical requirements 一般用途钢丝绳吊索特性和技术条件 |
China National Standards POS |
English PDF |
GB/T 7233.1-2009 |
Steel castings - Ultrasonic examination - Part 1: Steel castings for general purPOSes 铸钢件 超声检测 第1部分:一般用途铸钢件 |
China National Standards POS |
English PDF |
GB/T 24509-2009 |
ComPOSite wood floor of fire retardant 阻燃木质复合地板 |
China National Standards POS |
English PDF |
GB/T 24508-2009 |
Wood - Plastic comPOSite flooring 木塑地板 |
China National Standards POS |
English PDF |
GB/T 9649.16-2009 |
Terminology classification and code of geology and mineral resources - Part 16: Mineral dePOSit geology 地质矿产术语分类代码 第16部分:矿床学 |
China National Standards POS |
English PDF |
GB 17885-2009 |
Electromechanical contactors for household and similar purPOSes 家用及类似用途机电式接触器 |
China National Standards POS |
English PDF |
GB 17465.4-2009 |
Appliance couplers for household and similar general purPOSes - Part 2: Couplers dependent on appliance weight for engagement 家用和类似用途器具耦合器 第2部分:靠器具重量啮合的耦合器 |
China National Standards POS |
English PDF |
GB 17465.2-2009 |
Appliance couplers for household and similar general purPOSes - Part 2: Interconnection couplers for household and similar equipment 家用和类似用途器具耦合器 第2部分:家用和类似设备用互连耦合器 |
China National Standards POS |
English PDF |
GB 17465.1-2009 |
Appliances couplers for household and similar general purPOSes - Part 1: General requirements 家用和类似用途器具耦合器 第1部分:通用要求 |
China National Standards POS |
English PDF |
GB/T 24398-2009 |
DisPOSable plant fiber chopsticks 植物纤维一次性筷子 |
China National Standards POS |
English PDF |
GB/T 10681-2009 |
Tungsten filament lamps for domestic and similar general lighting purPOSes - Performance requirements 家庭和类似场合普通照明用钨丝灯 性能要求 |
China National Standards POS |
English PDF |
GB/T 24242.2-2009 |
Non-alloy steel wire rods for conversion to wire - Part 2: Specific requirements for general purPOSe wire rod 制丝用非合金钢盘条 第2部分:一般用途盘条 |
China National Standards POS |
English PDF |
GB/T 24213-2009 |
General rules for original POSition statistic distribution analysis method 金属原位统计分布分析方法通则 |
China National Standards POS |
English PDF |
GB/T 24195-2009 |
Corrosion of metals and alloys - Accelerated cyclic tests with exPOSure to acidified salt spray, “dry” and “wet” conditions 金属和合金的腐蚀 酸性盐雾、“干燥”和“湿润”条件下的循环加速腐蚀试验 |
China National Standards POS |
English PDF |
GB 24162-2009 |
Periodic inspection and evaluation of hoop wrapped fibre reinforced comPOSite gas cylinders with metal liners of compressed natural gas for automotive vehicles 汽车用压缩天然气金属内胆纤维环缠绕气瓶定期检验与评定 |
China National Standards POS |
English PDF |
GB 24161-2009 |
Periodic inspection and evaluation of comPOSite cylinders for breathing apparatus 呼吸器用复合气瓶定期检验与评定 |
China National Standards POS |
English PDF |
GB 24160-2009 |
Hoop-wrapped comPOSite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles 车用压缩天然气钢质内胆环向缠绕气瓶 |
China National Standards POS |
English PDF |
GB/T 24137-2009 |
Wood-plastic comPOSite decorative boards 木塑装饰板 |
China National Standards POS |
English PDF |
GB/T 15596-2009 |
Plastics - Determination of changes in colour and variations in properties after exPOSure to daylight under glass,natural weathering or laboratory light sources 塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定 |
China National Standards POS |
English PDF |
GB/T 2910.101-2009 |
Textiles - Quantitative chemical analysis - Part 101: Mixtures of soybean protein comPOSite fibre and certain other fibers 纺织品 定量化学分析 第101部分:大豆蛋白复合纤维与某些其他纤维的混合物 |
China National Standards POS |
English PDF |
GB/T 5132.5-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purPOSes - Part 5: Round laminated moulded rods 电气用热固性树脂工业硬质圆形层压管和棒 第5部分:圆形层压模制棒 |
China National Standards POS |
English PDF |
GB/T 5132.2-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purPOSes - Part 2: Methods of test 电气用热固性树脂工业硬质圆形层压管和棒 第2部分:试验方法 |
China National Standards POS |
English PDF |
GB/T 5132.1-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purPOSes - Part 1: General requirements 电气用热固性树脂工业硬质圆形层压管和棒 第1部分:一般要求 |
China National Standards POS |
English PDF |
Find out:1396Items | To Page of: First -Previous-Next -Last | [3] [4] [5] [6] [7] [8] [9] |