Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 23312.3-2009 |
EnamelleD round aluminium winding wire - Part 3: Polyester enamelled round aluminium wire, class 130 漆包铝圆绕组线 第3部分：130级聚酯漆包铝圆线 |
China National Standards D |
 English PDF |
| GB/T 23312.2-2009 |
EnamelleD round aluminium winding wire - Part 2: Polyvinyl acetal enamelled round aluminium wire, class 120 漆包铝圆绕组线 第2部分：120级缩醛漆包铝圆线 |
China National Standards D |
English PDF |
| GB/T 23312.1-2009 |
EnamelleD round aluminium winding wire - Part 1: General requirements 漆包铝圆绕组线 第1部分：一般规定 |
China National Standards D |
English PDF |
| GB/T 23311-2009 |
Aromatic polyimiDe tape wrapped round copper wire, class 240 240级芳族聚酰亚胺薄膜绕包铜圆线 |
China National Standards D |
English PDF |
| GB/T 23310-2009 |
Aromatic polyimiDe tape wrapped rectangular copper wire，class 240 240级芳族聚酰亚胺薄膜绕包铜扁线 |
China National Standards D |
English PDF |
| GB/T 23309-2009 |
Aluminium-magnesium alloy wires for shielD in cable 电缆屏蔽用铝镁合金线 |
China National Standards D |
English PDF |
| GB/T 23308-2009 |
Aluminium-magnesium-silicon alloy wire for overheaD line conductors 架空绞线用铝-镁-硅系合金圆线 |
China National Standards D |
English PDF |
| GB/T 23307-2009 |
Floor socket-outlets for householD and similar purposes 家用和类似用途地面插座 |
China National Standards D |
English PDF |
| GB/T 23306-2009 |
Specifications for flameproof three-phase asynchronous motors for use on Dispensers （frame size 63 to 100） 燃油加油机用隔爆型三相异步电动机(机座号63～100)技术条件 |
China National Standards D |
English PDF |
| GB/T 23293-2009 |
NitriDe bonded refractory products and their mortars 氮化物结合耐火制品及其配套耐火泥浆 |
China National Standards D |
English PDF |
| GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分：基于连接器的插箱和插件的接口尺寸 |
China National Standards D |
English PDF |
| GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分：编码键和定位销 |
China National Standards D |
English PDF |
| GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分：插拔器手柄 |
China National Standards D |
English PDF |
| GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分：插箱及其插件 |
China National Standards D |
English PDF |
| GB/T 19290.5-2009 |
MoDular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分：分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards D |
English PDF |
| GB/T 19290.4-2009 |
MoDular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分：分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards D |
English PDF |
| GB/T 17937-2009 |
Aluminium-claD steel wires for electrical purposes 电工用铝包钢线 |
China National Standards D |
English PDF |
| GB/T 17363.2-2009 |
NonDestructive mensuration of gold content in the gold products - Part 2: Method of compositive determine 黄金制品金含量无损测定方法 第2部分：综合测定方法 |
China National Standards D |
English PDF |
| GB/T 17363.1-2009 |
NonDestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis 黄金制品金含量无损测定方法 第1部分：电子探针微分析法 |
China National Standards D |
English PDF |
| GB/T 17048-2009 |
HarD-drawn aluminium wire for overhead line conductors 架空绞线用硬铝线 |
China National Standards D |
English PDF |
| GB/T 14820-2009 |
High-voltage ignition wires for roaD vehicles 公路车辆用高压点火电线 |
China National Standards D |
English PDF |
| GB/T 12970.4-2009 |
Flexilbe copper stranDed conductors for electrical purposes - Part 4: Copper wires for electric brush 电工软铜绞线 第4部分：铜电刷线 |
China National Standards D |
English PDF |
| GB/T 12970.3-2009 |
Flexible copper stranDed conductors for electrical purposes - Part 3: Flexible copper wire for antenna 电工软铜绞线 第3部分：软铜天线 |
China National Standards D |
English PDF |
| GB/T 12970.2-2009 |
Flexible copper stranDed conductors for electrical purposes - Part 2: Flexible copper stranded conductors 电工软铜绞线 第2部分：软铜绞线 |
China National Standards D |
English PDF |
| GB/T 12970.1-2009 |
Flexible copper stranDed conductors for electrical purposes - Part 1: General requirements 电工软铜绞线 第1部分：一般规定 |
China National Standards D |
English PDF |
| GB/T 11019-2009 |
Nickel coateD round copper wire 镀镍圆铜线 |
China National Standards D |
English PDF |
| GB/T 11016.4-2009 |
Plastic or rubber insulateD telephone cords - Part 4: Rubber insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第4部分：橡皮绝缘电话软线 |
China National Standards D |
English PDF |
| GB/T 11016.3-2009 |
Plastic or rubber insulateD telephone cords - Part 3: Polypropylene insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第3部分：聚丙烯绝缘电话软线 |
China National Standards D |
English PDF |
| GB/T 11016.2-2009 |
Plastic or rubber insulateD telephone cords - Part 2: Polyvinyl chloride insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第2部分：聚氯乙烯绝缘电话软线 |
China National Standards D |
English PDF |
| GB/T 11016.1-2009 |
Plastic or rubber insulateD telephone cords - Part 1: General 塑料绝缘和橡皮绝缘电话软线 第1部分：一般规定 |
China National Standards D |
English PDF |
| GB 50492-2009 |
CoDe for design of PET plant 聚酯工厂设计规范 |
China National Standards D |
English PDF |
| GB 50488-2009 |
CoDe for design of acrylic fibres plant 腈纶工厂设计规范 |
China National Standards D |
English PDF |
| GB/T 8190.11-2009 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous anD particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分：非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards D |
English PDF |
| GB/T 6809.7-2009 |
Reciprocating internal combustion engines - Vocabulary of components anD systems - Part 7: Governing systems 往复式内燃机 零部件和系统术语 第7部分：调节系统 |
China National Standards D |
English PDF |
| GB/T 6809.6-2009 |
Reciprocating internal combustion engines - Vocabulary of components anD systems - Part 6: Lubricating systems 往复式内燃机 零部件和系统术语 第6部分：润滑系统 |
China National Standards D |
English PDF |
| GB/T 6809.1-2009 |
Reciprocating internal combustion engines - Vocabulary of components anD systems - Part 1: Structure and external covers 往复式内燃机 零部件和系统术语 第1部分：固定件及外部罩盖 |
China National Standards D |
English PDF |
| GB/T 4759-2009 |
Exhaust silencers for internal combustion engines - Measurement proceDure 内燃机排气消声器 测量方法 |
China National Standards D |
English PDF |
| GB/T 23341.2-2009 |
Turbochargers - Part 2: Test methoDs 涡轮增压器 第2部分：试验方法 |
China National Standards D |
English PDF |
| GB/T 23340-2009 |
Internal combustion engines - Connecting-roDs - Specification 内燃机 连杆 技术条件 |
China National Standards D |
English PDF |
| GB/T 23337-2009 |
Internal combustion engines - Intake anD exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards D |
English PDF |
| GB/T 23332-2009 |
HumiDifiers 加湿器 |
China National Standards D |
English PDF |
| GB/T 22792.1-2009 |
Office furniture - Screens - Part 1: Dimensions 办公家具 屏风 第1部分：尺寸 |
China National Standards D |
English PDF |
| GB/T 14624.1-2009 |
Test methoD for colour of offset ink 胶印油墨颜色检验方法 |
China National Standards D |
English PDF |
| GB/T 13217.8-2009 |
Test methoD for blocking resistance of liquid ink 液体油墨抗粘连检验方法 |
China National Standards D |
English PDF |
| GB/T 13217.7-2009 |
Test methoD for adhesion to substrate of liquid ink with tape 液体油墨附着牢度检验方法 |
China National Standards D |
English PDF |
| GB/T 13217.2-2009 |
Test methoD for gloss of liquid ink 液体油墨光泽检验方法 |
China National Standards D |
English PDF |
| GB/T 13217.1-2009 |
Test methoD for colour of liquid ink 液体油墨颜色检验方法 |
China National Standards D |
English PDF |
| GB 50493-2009 |
Specification for Design of combustible gas and toxic gas detection and alarm for petrochemical industry 石油化工可燃气体和有毒气体检测报警设计规范 |
China National Standards D |
English PDF |
| GB 50489-2009 |
CoDe for Design of General Plot Plan and Transportation of Chemical Industrial Enterprises 化工企业总图运输设计规范 |
China National Standards D |
English PDF |
| GB 50483-2009 |
CoDe for design of environmental protectin of chemical industry projects 化工建设项目环境保护设计规范 |
China National Standards D |
English PDF |
| GB 50273-2009 |
CoDe for construction and acceptance of boiler installation engineering 锅炉安装工程施工及验收规范 |
China National Standards D |
English PDF |
| GB 50272-2009 |
CoDe for construction and acceptance of forging-press equipment installation engineering 锻压设备安装工程施工及验收规范 |
China National Standards D |
English PDF |
| GB 50231-2009 |
General coDe for construction and acceptance of mechanical equipment installation engineering 机械设备安装工程施工及验收通用规范 |
China National Standards D |
English PDF |
| GB 50495-2009 |
Technical coDe for solar heating system 太阳能供热采暖工程技术规范 |
China National Standards D |
English PDF |
| GB/T 786.1-2009 |
FluiD power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications 流体传动系统及元件图形符号和回路图 第1部分：用于常规用途和数据处理的图形符号 |
China National Standards D |
English PDF |
| GB/T 6062-2009 |
Geometrical proDuct specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范（GPS） 表面结构 轮廓法 接触(触针)式仪器的标称特性 |
China National Standards D |
English PDF |
| GB/T 4249-2009 |
Geometrical proDuct specifications(GPS) - Tolerancing principle 产品几何技术规范（GPS） 公差原则 |
China National Standards D |
English PDF |
| GB/T 3505-2009 |
Geometrical proDuct specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范（GPS） 表面结构 轮廓法 术语、定义及表面结构参数 |
China National Standards D |
English PDF |
| GB/T 3177-2009 |
Geometrical proDuct specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范（GPS） 光滑工件尺寸的检验 |
China National Standards D |
English PDF |
| GB/T 23935-2009 |
Design of cylindrical helical springs 圆柱螺旋弹簧设计计算 |
China National Standards D |
English PDF |
| GB/T 23934-2009 |
Hot coileD helical compression springs - Technical specifications 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards D |
English PDF |
| GB/T 23282-2009 |
Metal forming machinery - Noise measurement methoD of sound power levels 锻压机械噪声声功率级测量方法 |
China National Standards D |
English PDF |
| GB/T 23281-2009 |
Metal forming machinery -noise measurement methoD of sound pressure levels 锻压机械噪声声压级测量方法 |
China National Standards D |
English PDF |
| GB/T 23279-2009 |
Sheet-feeDing machine 单张纸输纸机 |
China National Standards D |
English PDF |
| GB/T 23253-2009 |
HyDraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards D |
English PDF |
| GB/T 23252-2009 |
Pneumatic fluiD power - Cylinders - Final examination and acceptance criteria 气缸 成品检验及验收 |
China National Standards D |
English PDF |
| GB/T 2089-2009 |
CylinDrical coiled compression spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数（两端圈并紧磨平或制扁） |
China National Standards D |
English PDF |
| GB/T 2088-2009 |
CylinDrical coiled tension spring dimensions and parameters 普通圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards D |
English PDF |
| GB/T 18779.3-2009 |
Geometrical proDuct specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 产品几何技术规范（GPS） 工件与测量设备的测量检验 第3部分：关于对测量不确定度的表述达成共识的指南 |
China National Standards D |
English PDF |
| GB/T 1801-2009 |
Geometrical proDuct specifications (GPS) - Limits and fits - Selection of tolerance zones and fits 产品几何技术规范（GPS） 极限与配合 公差带和配合的选择 |
China National Standards D |
English PDF |
| GB/T 1800.2-2009 |
Geometrical proDuct specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 产品几何技术规范（GPS） 极限与配合 第2部分：标准公差等级和孔、轴极限偏差表 |
China National Standards D |
English PDF |
| GB/T 1800.1-2009 |
Geometrical proDuct specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits 产品几何技术规范（GPS） 极限与配合 第1部分：公差、偏差和配合的基础 |
China National Standards D |
English PDF |
| GB/T 16947-2009 |
Helical spring fatigue testing stanDard 螺旋弹簧疲劳试验规范 |
China National Standards D |
English PDF |
| GB/T 16747-2009 |
Geometrical proDuct specification (GPS) - Surface texture：Profile method - Surface waviness terms 产品几何技术规范（GPS） 表面结构 轮廓法 表面波纹度词汇 |
China National Standards D |
English PDF |
| GB/T 16671-2009 |
Geometrical proDuct specifications(GPS) - Geometrical tolerancing - Maximum material requirement（MMR），least material requirement（LMR） and reciprocity requirement（RPR） 产品几何技术规范（GPS） 几何公差 最大实体要求、最小实体要求和可逆要求 |
China National Standards D |
English PDF |
| GB/T 14495-2009 |
Geometrical proDuct specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范（GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards D |
English PDF |
| GB/T 13828-2009 |
StranDed wire cylindrical helical springs 多股圆柱螺旋弹簧 |
China National Standards D |
English PDF |
| GB/T 1358-2009 |
CylinDrical helical spring seriate sizes 圆柱螺旋弹簧尺寸系列 |
China National Standards D |
English PDF |
| GB/T 12471-2009 |
Geometrical proDuct specifications（GPS) - Wooden part - Limit and fit 产品几何技术规范（GPS） 木制件 极限与配合 |
China National Standards D |
English PDF |
| GB/T 1239.3-2009 |
ColD coiled helical springs technical specifiations - Part 3: Torsion spring 冷卷圆柱螺旋弹簧技术条件 第3部分：扭转弹簧 |
China National Standards D |
English PDF |
| GB/T 1239.2-2009 |
ColD coiled helical springs technical specifications - Part 2: Compressions spring 冷卷圆柱螺旋弹簧技术条件 第2部分：压缩弹簧 |
China National Standards D |
English PDF |
| GB/T 1239.1-2009 |
ColD coiled helical springs technical specifications - Part 1: Extension spring 冷卷圆柱螺旋弹簧技术条件 第1部分：拉伸弹簧 |
China National Standards D |
English PDF |
| GB/T 10923-2009 |
Test coDe of accuracy for metalforming machine 锻压机械 精度检验通则 |
China National Standards D |
English PDF |
| GB/T 10610-2009 |
Geometrical proDuct specifications(GPS) - Surface texture：Profile method - Rules and procedures for the assessment of surface texture 产品几何技术规范（GPS） 表面结构 轮廓法 评定表面结构的规则和方法 |
China National Standards D |
English PDF |
| GB/T 1031-2009 |
Geometrical proDuct specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范（GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 |
China National Standards D |
English PDF |
| GB/T 9109.5-2009 |
Petroleum anD liquid petroleum products - Calculation of oil quantities - Dynamic measurement 石油和液体石油产品油量计算 动态计量 |
China National Standards D |
English PDF |
| GB/T 23258-2009 |
StanDard practice controlling internal corrosion in steel pipelines 钢质管道内腐蚀控制规范 |
China National Standards D |
English PDF |
| GB/T 23257-2009 |
Polyethylene coating for burieD steel pipeline 埋地钢质管道聚乙烯防腐层 |
China National Standards D |
English PDF |
| GB/T 23256-2009 |
Petroleum liquiDs - Automatic pipeline sampling - Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids 石油液体管线自动取样 测定石油液体中水含量的自动取样器性能的统计学评估 |
China National Standards D |
English PDF |
| GB/T 21412.6-2009 |
Petroleum anD natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems 石油天然气工业 水下生产系统的设计与操作 第6部分：水下生产控制系统 |
China National Standards D |
English PDF |
| GB/T 21412.3-2009 |
Petroleum anD natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems 石油天然气工业 水下生产系统的设计与操作 第3部分：过出油管（TFL）系统 |
China National Standards D |
English PDF |
| GB/T 17289-2009 |
LiquiD hydrocarbons - Volumetric measurement by turbine meter systems 液态烃体积测量 涡轮流量计计量系统 |
China National Standards D |
English PDF |
| GB/T 17288-2009 |
LiquiD hydrocarbons - Volumetric measurement by displacement meter systems 液态烃体积测量 容积式流量计计量系统 |
China National Standards D |
English PDF |
| GB/T 11146-2009 |
CruDe petroleum - Determination of water - Coulometric Karl Fischer titration method 原油水含量测定 卡尔?费休库仑滴定法 |
China National Standards D |
English PDF |
| GB/T 17257.2-2009 |
Urine collection bags - Part 2: Requirements anD test methods 集尿袋 第2部分：要求和检验方法 |
China National Standards D |
English PDF |
| GB/T 15722-2009 |
Competitive qualification of meDical stardard of volleyballsitting for disabled athletes 残疾人坐地排球运动员参赛资格的医学标准 |
China National Standards D |
English PDF |
| GB/T 14726-2009 |
MeDical and functional classification for disabled athletes 残疾运动员的医学和功能分级 |
China National Standards D |
English PDF |
| GB/T 14191.1-2009 |
Prosthetics anD orthotics-vocabulary - Part 1: General terms for external limb prostheses and external orthoses 假肢学和矫形器学术语 第1部分：体外肢体假肢和体外矫形器的基本术语 |
China National Standards D |
English PDF |
| GB/T 23373-2009 |
Determination of butylated hydroxyl anisole（BHA）、dibutylated hydroxyl toluene（BHT）and tertiary butyl hydroquinone（TBHQ） in foods 食品中抗氧化剂丁基羟基茴香醚（BHA）、二丁基羟基甲苯（BHT）与特丁基对苯二酚（TBHQ）的测定 |
China National Standards D |
English PDF |
| GB/T 23372-2009 |
Determination of inorganic-arsenic in foods - Liquid chromatography - Inductive coupled plasma mass spectrometer 食品中无机砷的测定 液相色谱 电感耦合等离子体质谱法 |
China National Standards D |
English PDF |
| Find out:48536Items | To Page of: First -Previous-Next -Last | [320] [321] [322] [323] [324] [325] [326] |
+86-755-25831330
