GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 26803.2-2011 |
Industrial control computer system - Bus - Part 2: System external bus - General specification for serial interFAce 工业控制计算机系统 总线 第2部分:系统外部总线 串行接口通用技术条件 |
China National Standards FA |
English PDF |
GB/T 16833-2011 |
Electronic data interchange for administration,commerce and transport (EDIFACT) code list 行政、商业和运输业电子数据交换(EDIFACT)代码表 |
China National Standards FA |
English PDF |
GB/T 15947-2011 |
EDIFACT message design rules for EDI 行政、商业和运输业电子数据交换(EDIFACT)报文设计规则 |
China National Standards FA |
English PDF |
GB/T 11592-2011 |
InterFAce between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for start-stop transmission services on public data networks 公用数据网上起/止传输业务使用的数据终端设备(DTE)和数据电路终接设备(DCE)间的接口 |
China National Standards FA |
English PDF |
GB/T 11591-2011 |
Packet assembly/disassembly FAcility(PAD) in a public data network 公用数据网中的分组装拆(PAD)设施 |
China National Standards FA |
English PDF |
GB/T 11590-2011 |
International data transmission services and optional user FAcilities in public data networks and ISNDs 公用数据网与ISDN网的国际数据传输业务和任选用户设施 |
China National Standards FA |
English PDF |
GB/T 50718-2011 |
Standard for design document editing of construction projects in building materials FActories 建材工厂工程建设项目设计文件编制标准 |
China National Standards FA |
English PDF |
GB 50694-2011 |
Code for design of fire protection and prevention of alcoholic beverages FActory 酒厂设计防火规范 |
China National Standards FA |
English PDF |
GB/T 5764-2011 |
Clutch FAcings for antomobiles 汽车用离合器面片 |
China National Standards FA |
English PDF |
GB/T 26740-2011 |
Road vehicles - Brake linings - Disc brake pads - Evaluation of surFAce and material flaws after testing 道路车辆 制动衬片 盘式制动衬块 试验后表面和材料缺陷的评价方法 |
China National Standards FA |
English PDF |
GB/T 26737-2011 |
Road vehicles - Brake linings - Test method for seizure to ferrous mating surFAce due to corrosion 道路车辆 制动衬片 锈蚀对铁偶合面粘结影响的试验方法 |
China National Standards FA |
English PDF |
GB/T 26729-2011 |
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surFAce irrigation - Specifications and test methods 农业灌溉设备 地表灌溉用聚氯乙烯(PVC)低压管 技术规范和试验方法 |
China National Standards FA |
English PDF |
GB/T 26769-2011 |
Video-based detecting method for pavement surFAce distress 路面损坏视频检测方法 |
China National Standards FA |
English PDF |
GB/T 26547-2011 |
Rotary tools for threaded FAsteners - Performance test method 螺纹紧固件用回转式工具 性能试验方法 |
China National Standards FA |
English PDF |
GB/T 26678-2011 |
Electrical control system of machine tool - The requirements of processing program for CNC surFAce grinding machines 机床电气控制系统 数控平面磨床的加工程序要求 |
China National Standards FA |
English PDF |
GB/T 26677-2011 |
Electrical control system of machine tools - Miscellaneous function M code and macro parameter of CNC surFAce grinding machine 机床电气控制系统 数控平面磨床辅助功能M代码和宏参数 |
China National Standards FA |
English PDF |
GB/T 14057.2-2011 |
Decontamination of radioactively contaminated surFAce - Part 2:Testing method of decontamination agents for textiles 放射性污染表面去污 第2部分:纺织品去污剂的试验方法 |
China National Standards FA |
English PDF |
GB/T 14056.2-2011 |
Evaluation of surFAce contamination - Part 2:Tritium surface contamination 表面污染测定 第2部分:氚表面污染 |
China National Standards FA |
English PDF |
GB 17927.2-2011 |
Upholstered furniture - Assessment of the resistance to ignition of the mattress and the soFA - Part 2: Ignition source:match flame equivalent 软体家具 床垫和沙发 抗引燃特性的评定 第2部分:模拟火柴火焰 |
China National Standards FA |
English PDF |
GB 17927.1-2011 |
Upholstered furniture - Assessment of the resistance to ignition of the mattress and the saFA - Part 1: Ignition source:smouldering cigarette 软体家具 床垫和沙发 抗引燃特性的评定 第1部分:阴燃的香烟 |
China National Standards FA |
English PDF |
GB/T 26636-2011 |
Animal and vegetable FAts and oils - Determination of polymerized triglycerides content by high-performance size-exclusion chromatography (HPSEC) 动植物油脂 聚合甘油三酯的测定 高效空间排阻色谱法(HPSEC) |
China National Standards FA |
English PDF |
GB/T 26635-2011 |
Animal and vegetable FAts and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography 动植物油脂 生育酚及生育三烯酚含量测定 高效液相色谱法 |
China National Standards FA |
English PDF |
GB/T 26634-2011 |
Animal and vegetable FAts and oils - Determination of the deterioration of bleachability index (DOBI) 动植物油脂 脱色能力指数(DOBI)的测定 |
China National Standards FA |
English PDF |
GB/T 26630-2011 |
Good manuFActuring practice for rice processing enterprise 大米加工企业良好操作规范 |
China National Standards FA |
English PDF |
GB/T 26626-2011 |
Animal and vegetable FAts and oils - Determination of water content - Karl Fischer method (pyridine free) 动植物油脂 水分含量测定 卡尔费休法(无吡啶) |
China National Standards FA |
English PDF |
GB/T 26624-2011 |
Design specifications for wastewater storage FAcility of animal farm 畜禽养殖污水贮存设施设计要求 |
China National Standards FA |
English PDF |
GB/T 26568-2011 |
Magnesium sulFAte for agricultural use 农业用硫酸镁 |
China National Standards FA |
English PDF |
GB 50688-2011 |
Code for design of urban road traffic FAcility 城市道路交通设施设计规范 |
China National Standards FA |
English PDF |
GB 26410-2011 |
Explosion-proof FAn 防爆通风机 |
China National Standards FA |
English PDF |
GB/T 666-2011 |
Chemical reagent - Zinc sulFAte heptahydrate 化学试剂 七水合硫酸锌(硫酸锌) |
China National Standards FA |
English PDF |
GB/T 664-2011 |
Chemical reagent - Iron(Ⅱ)sulFAte heptahydrate 化学试剂 七水合硫酸亚铁(硫酸亚铁) |
China National Standards FA |
English PDF |
GB/T 661-2011 |
Chemical reagent - Ammonium iron(II) sulFAte hexahydrate 化学试剂 六水合硫酸铁(Ⅱ)铵(硫酸亚铁铵) |
China National Standards FA |
English PDF |
GB/T 655-2011 |
Chemical reagent - Ammonium persulFAte 化学试剂 过硫酸铵 |
China National Standards FA |
English PDF |
GB/T 641-2011 |
Chemical reagent - Potassium peroxydisulFAte 化学试剂 过二硫酸钾(过硫酸钾) |
China National Standards FA |
English PDF |
GB/T 26524-2011 |
Refined nickel sulFAtes 精制硫酸镍 |
China National Standards FA |
English PDF |
GB/T 26523-2011 |
Refined cobaltous sulFAtes 精制硫酸钴 |
China National Standards FA |
English PDF |
GB/T 26519.2-2011 |
PersulFAte for industrial use - Part 2:Potassium persulfate for industrial use 工业过硫酸盐 第2部分:工业过硫酸钾 |
China National Standards FA |
English PDF |
GB/T 26498-2011 |
Industrial automation systems and integration - Physical device control - Dimensional Measuring InterFAce Standard (DMIS) 工业自动化系统与集成 物理设备控制 尺寸测量接口标准(DMIS) |
China National Standards FA |
English PDF |
GB/T 26463-2011 |
Oxo s ynthetic FAtty alcohol 羰基合成脂肪醇 |
China National Standards FA |
English PDF |
GB/T 26458-2011 |
FAtty alkyl dimethyl amine oxides 脂肪烷基二甲基氧化胺 |
China National Standards FA |
English PDF |
GB/T 26457-2011 |
Woven paper machine dryer FAbric with round yarn 造纸用圆丝干燥网 |
China National Standards FA |
English PDF |
GB/T 26456-2011 |
Woven paper machine dryer FAbric with special shape yarn 造纸用异形丝干燥网 |
China National Standards FA |
English PDF |
GB/T 26455-2011 |
Paper machine multi-layer forming FAbric 造纸用多层成形网 |
China National Standards FA |
English PDF |
GB/T 26454-2011 |
Paper machine single layer forming FAbric 造纸用单层成形网 |
China National Standards FA |
English PDF |
GB/T 26388-2011 |
Determination of dioxane residues in surFActants - Gas chromatographic method 表面活性剂中二噁烷残留量的测定 气相色谱法 |
China National Standards FA |
English PDF |
GB/T 26383-2011 |
Worsted FAbric with radioresistance 抗电磁辐射精梳毛织品 |
China National Standards FA |
English PDF |
GB/T 26382-2011 |
Worsted FAbric 精梳毛织品 |
China National Standards FA |
English PDF |
GB/T 26381-2011 |
Synthetic filament weaved gray FAbrics 合成纤维丝织坯绸 |
China National Standards FA |
English PDF |
GB/T 26378-2011 |
Woolen FAbircs 粗梳毛织品 |
China National Standards FA |
English PDF |
GB/T 50691-2011 |
Standard for Compiling the design documents of oil and gas field surFAce construction projects 油气田地面工程建设项目设计文件编制标准 |
China National Standards FA |
English PDF |
GB 26401-2011 |
National Food Safety Standard-Food Additives-Arachidonic acid FAt (fermentation) 食品安全国家标准 食品添加剂 花生四烯酸油脂(发酵法) |
China National Standards FA |
English PDF |
GB 26400-2011 |
National Food Safety Standard-Food Additives-Docosahexaenoic acid FAt (fermentation) 食品安全国家标准 食品添加剂 二十二碳六烯酸油脂(发酵法) |
China National Standards FA |
English PDF |
GB 50682-2011 |
Technical code for pre-FAbricated united pipe risers 预制组合立管技术规范 |
China National Standards FA |
English PDF |
GB/T 50676-2011 |
Technical code for appraisal of reliability of concrete structural FActory buildings for uranium fuel element plants 铀燃料元件厂混凝土结构厂房可靠性鉴定技术规范 |
China National Standards FA |
English PDF |
GB/T 5559-2010 |
Non-ionic surFAce active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block copolymers - Determination of cloud point 环氧乙烷型及环氧乙烷-环氧丙烷嵌段聚合型非离子表面活性剂 浊点的测定 |
China National Standards FA |
English PDF |
GB/T 5551-2010 |
SurFAce active agents - Determination for total calcium ion and magnesium ion contents in dispersing agents 表面活性剂 分散剂中钙、镁离子总含量的测定方法 |
China National Standards FA |
English PDF |
GB/T 5549-2010 |
SurFAce active agents - Determination of surface tension by drawing up liquid films 表面活性剂 用拉起液膜法测定表面张力 |
China National Standards FA |
English PDF |
GB/T 7381-2010 |
SurFAce active agents - Determination of stability in hard water 表面活性剂 在硬水中稳定性的测定方法 |
China National Standards FA |
English PDF |
GB 7947-2010 |
Basic and safety principles for man-machine interFAce,marking and identification - Identification of conductors by colours or alphanumerics 人机界面标志标识的基本和安全规则 导体颜色或字母数字标识 |
China National Standards FA |
English PDF |
GB/T 12967.7-2010 |
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand FAlling test apparatus 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性 |
China National Standards FA |
English PDF |
GB/T 26142.2-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 2: Mounting interFAce surfaces with optional electrical connector 气动五通方向控制阀 规格18mm和26mm 第2部分:带可选电气接头的安装面 |
China National Standards FA |
English PDF |
GB/T 26142.1-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 1: Mounting interFAce surfaces without electrical connector 气动五通方向控制阀 规格18mm和26mm 第1部分:不带电气接头的安装面 |
China National Standards FA |
English PDF |
GB/Z 26139-2010 |
Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manuFActurers 土方机械 驾乘式机器暴露于全身振动的评价指南 国际协会、组织和制造商所测定协调数据的应用 |
China National Standards FA |
English PDF |
GB/T 4205-2010 |
Basic and safety principles for man-machine interFAce(MMI),marking and identification - Actuating principles 人机界面标志标识的基本和安全规则 操作规则 |
China National Standards FA |
English PDF |
GB/T 4026-2010 |
Basic and safety principles for man-machine interFAce,marking and identification - Identification of equipment terminals and conductor terminations 人机界面标志标识的基本和安全规则 设备端子和导体终端的标识 |
China National Standards FA |
English PDF |
GB/T 4025-2010 |
Basic and safety principles for man-machine interFAce,marking and identification - Coding principles for indicators and actuators 人机界面标志标识的基本和安全规则 指示器和操作器件的编码规则 |
China National Standards FA |
English PDF |
GB/T 26160-2010 |
Head-FAce dimensions of Chinese minors 中国未成年人头面部尺寸 |
China National Standards FA |
English PDF |
GB/T 26361-2010 |
The demarcation and evaluation of FAcility and service for tourist restaurants 旅游餐馆设施与服务等级划分 |
China National Standards FA |
English PDF |
GB/T 26359-2010 |
FAcility and service specifications of tourist coach 旅游客车设施与服务规范 |
China National Standards FA |
English PDF |
GB/T 26275.2-2010 |
DTV-CSI interFAce specification for channel separation of digital television receiver Part 2: Test specification 数字电视接收设备机道分离DTV-CSI接口规范 第2部分:测试规范 |
China National Standards FA |
English PDF |
GB/T 26275.1-2010 |
DTV-CSI interFAce specification for channel separation of digital television receiver Part 1: Technical specification 数字电视接收设备机道分离DTV-CSI接口规范 第1部分:技术规范 |
China National Standards FA |
English PDF |
GB/T 26153.1-2010 |
Flexible manuFActuring system of off-line programming robots - Part 1: General requirements 离线编程式机器人柔性加工系统 第1部分:通用要求 |
China National Standards FA |
English PDF |
GB/T 22124.2-2010 |
Equipment manuFActuring oriented product life-cycle technology knowledge - Part 2 :Coding regulation of general manufacturing technology classification 面向装备制造业产品全生命周期工艺知识 第2部分:通用制造工艺分类编码规范 |
China National Standards FA |
English PDF |
GB/T 16656.508-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 508:Application interpreted construct:Non-manifold surFAce 工业自动化系统与集成 产品数据表达与交换 第 508 部分:应用解释构造:非流形曲面 |
China National Standards FA |
English PDF |
GB/Z 16656.1007-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 1007: Application module: General surFAce appearance 工业自动化系统与集成 产品数据表达与交换 第1007部分:应用模块:通用曲面外观 |
China National Standards FA |
English PDF |
GB/T 7962.19-2010 |
Test methods of colourless optical glass - Part 19: Abration FActor 无色光学玻璃测试方法 第19部分:磨耗度 |
China National Standards FA |
English PDF |
GB/T 26230-2010 |
Information Technology - Telecommunications and information exchange between systems - MAC-PHY InterFAce for Wireless high rate ultra wideband 信息技术 系统间远程通信和信息交换 无线高速率超宽带媒体访问控制和物理层接口规范 |
China National Standards FA |
English PDF |
GB/T 25928-2010 |
Automation systems in the process industry - FActory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) 过程工业自动化系统出厂验收测试(FAT)、现场验收测试(SAT)、现场综合测试(SIT)规范 |
China National Standards FA |
English PDF |
GB/T 25917-2010 |
Axial force-applied FAtigue testing machines dynamic force calibration 轴向加力疲劳试验机动态力校准 |
China National Standards FA |
English PDF |
GB/T 19114.43-2010 |
Industrial automation systems and integration - Industrial manuFActuring management data - Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange 工业自动化系统与集成 工业制造管理数据 第43部分:制造流程管理数据:流程监控与制造数据交换的数据模型 |
China National Standards FA |
English PDF |
GB/T 18268.25-2010 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 25: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interFAces according to IEC 61784-1, CP 3/ 测量、控制和实验室用的电设备 电磁兼容性要求 第25部分:特殊要求 接口符合IEC61784-1, CP3/2的现场装置的试验配置、工作条件和性能判据 |
China National Standards FA |
English PDF |
GB/T 16656.509-2010 |
Industial automation systems and integration - Product data representation and exchage - Part 509: Application interpreted construct: Manifold surFAce 工业自动化系统与集成 产品数据表达与交换 第509部分:应用解释构造:流形曲面 |
China National Standards FA |
English PDF |
GB/T 16656.507-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 507: Application interpreted construct: Geometrically bounded surFAcee 工业自动化系统与集成 产品数据表达与交换 第507部分:应用解释构造:几何有界曲面 |
China National Standards FA |
English PDF |
GB/T 12085.13-2010 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free FAll and dry heat or cold 光学和光学仪器 环境试验方法 第13部分:冲击、碰撞或自由跌落与高温、低温综合试验 |
China National Standards FA |
English PDF |
GB/T 26153.2-2010 |
Flexible manuFActuring system of off-line programming robots - Part 2 :Belt grinding manufacturing system 离线编程式机器人柔性加工系统 第2部分:砂带磨削加工系统 |
China National Standards FA |
English PDF |
GB/Z 26083-2010 |
Determination for Copper(II) octaalkoxyl-substituted phthalocyanine on graphite surFAce (scanning tunneling microscope) 八辛氧基酞菁铜分子在石墨表面吸附结构的测试方法(扫描隧道显微镜) |
China National Standards FA |
English PDF |
GB/T 9125-2010 |
FAsteners for pipe flange joints 管法兰连接用紧固件 |
China National Standards FA |
English PDF |
GB/T 90.3-2010 |
FAsteners - Quality assurance system 紧固件 质量保证体系 |
China National Standards FA |
English PDF |
GB/T 6468-2010 |
The helix artiFAct of gear 齿轮螺旋线样板 |
China National Standards FA |
English PDF |
GB/T 3098.9-2010 |
Mechanical properties of FAsteners - Prevailing torque type steel nuts 紧固件机械性能 有效力矩型钢锁紧螺母 |
China National Standards FA |
English PDF |
GB/T 3098.8-2010 |
Mechanical properties of FAsteners - Parts for bolted connections for use at temperatures from -200℃~+700℃ 紧固件机械性能 -200℃~+700℃使用的螺栓连接零件 |
China National Standards FA |
English PDF |
GB/T 3098.1-2010 |
Mechanical properties of FAsteners - Bolts,screws and studs 紧固件机械性能 螺栓、螺钉和螺柱 |
China National Standards FA |
English PDF |
GB/T 26119-2010 |
Green manuFActuring - Life cycle assessment for mechanical products - General 绿色制造 机械产品生命周期评价 总则 |
China National Standards FA |
English PDF |
GB/T 26077-2010 |
Metallic materials - FAtigue testing - Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards FA |
English PDF |
GB/T 26076-2010 |
Metal sheets and strips - Axial-force-controlled FAtigue testing method 金属薄板(带) 轴向力控制疲劳试验方法 |
China National Standards FA |
English PDF |
GB/T 26070-2010 |
Characterization of subsurFAce damage in polished compound semiconductor wafers by reflectance difference spectroscopy method 化合物半导体抛光晶片亚表面损伤的反射差分谱测试方法 |
China National Standards FA |
English PDF |
GB/T 26004-2010 |
Special conductive coatings on surFAce spraying 表面喷涂用特种导电涂料 |
China National Standards FA |
English PDF |
GB/T 2501-2010 |
Connection dimensions and mating FAce of marine flanges 船用法兰连接尺寸和密封面 |
China National Standards FA |
English PDF |
GB/T 16823.3-2010 |
FAsteners - Torque/clamp force testing 紧固件 扭矩-夹紧力试验 |
China National Standards FA |
English PDF |
GB 25501-2010 |
Minimum allowable values of water efficiency and water efficiency grades for FAucets 水嘴用水效率限定值及用水效率等级 |
China National Standards FA |
English PDF |
Find out:3531Items | To Page of: First -Previous-Next -Last | [16] [17] [18] [19] [20] [21] [22] |