Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 25257-2010 |
OptICal functional films - Determination of warping degree 光学功能薄膜 翘曲度测定方法 |
China National Standards IC |
 English PDF |
| GB/T 25256-2010 |
OptICal functional films - Release film - The measurement of peeling force at 180°angle and subsequent adhesion 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法 |
China National Standards IC |
English PDF |
| GB/T 25255-2010 |
OptICal functional films - Polyethylene terephthalate（PET）film - Determination of tensile properties 光学功能薄膜 聚对苯二甲酸乙二醇酯（PET）薄膜 拉伸性能测定方法 |
China National Standards IC |
English PDF |
| GB/T 25253-2010 |
PhenolIC resin coatings 酚醛树脂涂料 |
China National Standards IC |
English PDF |
| GB/T 25252-2010 |
PhenolIC resin anticorrosive coatings 酚醛树脂防锈涂料 |
China National Standards IC |
English PDF |
| GB/T 25189-2010 |
MICrobeam analysis - Determination method for quantitative analysis parameters of SEM-EDS 微束分析 扫描电镜能谱仪定量分析参数的测定方法 |
China National Standards IC |
English PDF |
| GB/T 25188-2010 |
ThICkness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy 硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法 |
China National Standards IC |
English PDF |
| GB/T 25187-2010 |
Surface chemICal analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters 表面化学分析 俄歇电子能谱 - 选择仪器性能参数的表述 |
China National Standards IC |
English PDF |
| GB/T 25186-2010 |
Surface chemICal analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials 表面化学分析 二次离子质谱 - 由离子注入参考物质确定相对灵敏度因子 |
China National Standards IC |
English PDF |
| GB/T 25185-2010 |
Surface chemICal analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction 表面化学分析 X射线光电子能谱 - 荷电控制和荷电校正方法的报告 |
China National Standards IC |
English PDF |
| GB/T 25184-2010 |
VerifICation method for X-ray photoelectron spectrometers X射线光电子能谱仪检定方法 |
China National Standards IC |
English PDF |
| GB/T 25183-2010 |
Paste for compressive strength test of wall brICk 砌墙砖抗压强度试验用净浆材料 |
China National Standards IC |
English PDF |
| GB/T 25180-2010 |
TechnICal requirements for integrated treatment and resource utilization of municipal solid waste 生活垃圾综合处理与资源利用技术要求 |
China National Standards IC |
English PDF |
| GB/T 25179-2010 |
TechnICal requirements for site utilization after stabilization in municipal solid waste landfill 生活垃圾填埋场稳定化场地利用技术要求 |
China National Standards IC |
English PDF |
| GB/T 25175-2010 |
TechnICal requirements for collection and recycling of bulky waste 大件垃圾收集和利用技术要求 |
China National Standards IC |
English PDF |
| GB/T 16577-2010 |
PlastICs - Tetrahydroxy polyether polyols 塑料 四羟基聚醚多元醇 |
China National Standards IC |
English PDF |
| GB/T 16576-2010 |
PlastICs - Trihydroxy polyether polyols 塑料 三羟基聚醚多元醇 |
China National Standards IC |
English PDF |
| GB/T 1632.3-2010 |
PlastICs - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第3部分：聚乙烯和聚丙烯 |
China National Standards IC |
English PDF |
| GB/T 12008.7-2010 |
PlastICs - Polyether polyols - Part 7：Determination of viscosity 塑料 聚醚多元醇 第7部分：粘度的测定 |
China National Standards IC |
English PDF |
| GB/T 12008.6-2010 |
PlastICs - Polyether polyols - Part 6: Determination of degree of unsaturation 塑料 聚醚多元醇 第6部分：不饱和度的测定 |
China National Standards IC |
English PDF |
| GB/T 12008.5-2010 |
PlastICs - Polyether polyols - Part 5：Determination of acidity as acid number 塑料 聚醚多元醇 第5部分：酸值的测定 |
China National Standards IC |
English PDF |
| GB/T 12008.2-2010 |
PlastICs - Polyether polyols - Part 2：Specification 塑料 聚醚多元醇 第2部分：规格 |
China National Standards IC |
English PDF |
| GB/T 15597.2-2010 |
PlastICs - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards IC |
English PDF |
| GB/T 15594-2010 |
PlastICs - Octahydroxy polyether polyols 塑料 八羟基聚醚多元醇 |
China National Standards IC |
English PDF |
| GB/T 1033.3-2010 |
PlastICs - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method 塑料 非泡沫塑料密度的测定 第3部分：气体比重瓶法 |
China National Standards IC |
English PDF |
| GB/T 1033.2-2010 |
PlastICs - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method 塑料 非泡沫塑料密度的测定 第2部分：密度梯度柱法 |
China National Standards IC |
English PDF |
| GB 25194-2010 |
Safety rules for the construction and installation of servICe lifts 杂物电梯制造与安装安全规范 |
China National Standards IC |
English PDF |
| GB/T 25165-2010 |
Protocol of identifICation of bovine, caprine, ovine and porcine derived materials in gelatin - Real time PCR method 明胶中牛、羊、猪源性成分的定性检测方法 实时荧光PCR法 |
China National Standards IC |
English PDF |
| GB 16999-2010 |
Universal technICal requirements of RMB - Banknote discriminating device 人民币鉴别仪通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 8574-2010 |
Determination of potassium content for compound fertilizers potassium tetraphenylborate gravimetrIC method 复混肥料中钾含量的测定 四苯硼酸钾重量法 |
China National Standards IC |
English PDF |
| GB/T 8572-2010 |
Determination of total nitrogen content for compound fertilizers titrimetrIC method after distillation 复混肥料中总氮含量的测定 蒸馏后滴定法 |
China National Standards IC |
English PDF |
| GB/T 8570.7-2010 |
Determination of liquefied anhydrous ammonia - Part 7: Iron content - o-Phenathroline spectrophotometrIC method 液体无水氨的测定方法 第7部分：铁含量 邻菲?啉分光光度法 |
China National Standards IC |
English PDF |
| GB/T 8570.6-2010 |
Determination of liquefied anhydrous ammonia - Part 6: Oil content - GravimetrIC and infra-red methods 液体无水氨的测定方法 第6部分：油含量 重量法和红外吸收光谱法 |
China National Standards IC |
English PDF |
| GB/T 8570.4-2010 |
Determination of liquefied anhydrous ammonia - Part 4: Residue content - TitrimetrIC method 液体无水氨的测定方法 第4部分：残留物含量 容量法 |
China National Standards IC |
English PDF |
| GB/T 8570.3-2010 |
Determination of liquefied anhydrous ammonia - Part 3: Residue content - GravimetrIC method 液体无水氨的测定方法 第3部分：残留物含量 重量法 |
China National Standards IC |
English PDF |
| GB/T 25247-2010 |
Feed additive - SaccharICterpenin 饲料添加剂 糖萜素 |
China National Standards IC |
English PDF |
| GB/T 25246-2010 |
Technology code for land applICation rates of livestock and poultry manure 畜禽粪便还田技术规范 |
China National Standards IC |
English PDF |
| GB/T 25239-2010 |
Grain and oil machinery - mICro-feeder 粮油机械 微量喂料器 |
China National Standards IC |
English PDF |
| GB/T 25236-2010 |
Grain and oil machine - SlICe hammer smasher for inspection 粮油机械 检验用锤片粉碎机 |
China National Standards IC |
English PDF |
| GB/T 25170-2010 |
TechnICal regulation of farm animals genome BAC library construction and preservation 畜禽基因组BAC文库构建与保存技术规程 |
China National Standards IC |
English PDF |
| GB/T 25169-2010 |
TechnICal specifications for monitoring of animal manure 畜禽粪便监测技术规范 |
China National Standards IC |
English PDF |
| GB/T 25168-2010 |
TechnICal regulation of farm animals cDNA library construction and preservation 畜禽 cDNA 文库构建与保存技术规程 |
China National Standards IC |
English PDF |
| GB/T 25162.2-2010 |
Sacks - Drop test - Part 2: Sacks made from thermoplastIC flexible film 包装袋 跌落试验 第2部分：热塑性软质薄膜袋 |
China National Standards IC |
English PDF |
| GB/T 25161.2-2010 |
Packaging sacks - Dimensional tolerances - Part 2: Sacks made from thermoplastIC flexible film 包装袋 尺寸允许偏差 第2部分：热塑性软质薄膜袋 |
China National Standards IC |
English PDF |
| GB/T 25158-2010 |
DynamIC balancing machine for tyre 轮胎动平衡试验机 |
China National Standards IC |
English PDF |
| GB/T 25157-2010 |
Inspections methods of injection moulding machines for rubber and plastICs 橡胶塑料注射成型机检测方法 |
China National Standards IC |
English PDF |
| GB/T 25156-2010 |
General specifICations of injection moulding machines for rubber and plastics 橡胶塑料注射成型机通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 25153-2010 |
ChemICal industry pressure vessel used magnetic-float type level gauge 化工压力容器用磁浮子液位计 |
China National Standards IC |
English PDF |
| GB/T 25152-2010 |
SpecifICation for liquid-liquid hydrocyclone separators 液-液分离旋流器技术条件 |
China National Standards IC |
English PDF |
| GB/T 25151.5-2010 |
FabrICation and inspection method for high pressure urea equipment - Part 5: Ammonia leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第5部分：尿素高压设备氨渗漏试验方法 |
China National Standards IC |
English PDF |
| GB/T 25151.4-2010 |
FabrICation and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取 |
China National Standards IC |
English PDF |
| GB/T 25151.3-2010 |
FabrICation and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第3部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验 |
China National Standards IC |
English PDF |
| GB/T 25151.2-2010 |
FabrICation and inspection method for high pressure urea equipment - Part 2: Selective corrosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第2部分：尿素级超低碳铬镍钼奥氏体不锈钢选择性腐蚀检查和金相检查 |
China National Standards IC |
English PDF |
| GB/T 25151.1-2010 |
FabrICation and inspection method for high pressure urea equipment - Part 1: Ultrasonic examination on the automatic strip overlay welds of stainless steel 尿素高压设备制造检验方法 第1部分：不锈钢带极自动堆焊层超声波检测 |
China National Standards IC |
English PDF |
| GB/T 25150-2010 |
Quality test method of passive film on austenitIC stainless steel of chemical cleaning for industrial equipment - Blue dot method 工业设备化学清洗中奥氏体不锈钢钝化膜质量的测试方法 蓝点法 |
China National Standards IC |
English PDF |
| GB/T 25149-2010 |
Quality test method of passive film on carbon steel of chemICal cleaning for industrial equipment - Red dot method 工业设备化学清洗中碳钢钝化膜质量的测试方法 红点法 |
China National Standards IC |
English PDF |
| GB/T 25148-2010 |
Test methods of scale removal rate and detergence rate of chemICal cleaning for industrial equipment 工业设备化学清洗中除垢率和洗净率测试方法 |
China National Standards IC |
English PDF |
| GB/T 25147-2010 |
Test method of metal corrosion amount and corrosion rate of chemICal cleaning for industrial equipment - Gravimetric method 工业设备化学清洗中金属腐蚀率及腐蚀总量的测试方法 重量法 |
China National Standards IC |
English PDF |
| GB/T 25146-2010 |
Quality acceptance specifICations of chemical cleaning for industrial equipment 工业设备化学清洗质量验收规范 |
China National Standards IC |
English PDF |
| GB/T 25144-2010 |
Determination of coeffICient of mean linear thermal expansion for vitreous and porcelain enamels 搪玻璃釉平均线热膨胀系数的测定方法 |
China National Standards IC |
English PDF |
| GB/T 25143-2010 |
SpecifICation of moulds for vacuum thermoforming 真空成型模技术条件 |
China National Standards IC |
English PDF |
| GB/T 25227-2010 |
TechnICal code for field detective devices for the equipments in grain processing and storage system 粮食加工、储运设备现场监测装置技术规范 |
China National Standards IC |
English PDF |
| GB/T 25226-2010 |
RICe - Evaluation of gelatinization time of kernels during cooking 大米 蒸煮过程中米粒糊化时间的评价 |
China National Standards IC |
English PDF |
| GB/T 25225-2010 |
Animal and vegetable fats and oils - Detection and identifICation of a volatile organic contaminant by GC/MS 动植物油脂 挥发性有机污染物的测定 气相色谱-质谱法 |
China National Standards IC |
English PDF |
| GB/T 25223-2010 |
Animal and vegetable fats and oils － Determination of individual and total sterols contents － Gas chromatographIC method 动植物油脂 甾醇组成和甾醇总量的测定 气相色谱法 |
China National Standards IC |
English PDF |
| GB/T 25222-2010 |
Inspection of grain and oils - Determination of phosphide residues in grain-spectrophotometrIC method 粮油检验 粮食中磷化物残留量的测定 分光光度法 |
China National Standards IC |
English PDF |
| GB/T 25218-2010 |
Grain and oil machinery - General specifICations for products painting 粮油机械 产品涂装通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 17858.2-2010 |
Packaging sacks - Vocabulary and types - Part 2: Sacks made from thermoplastIC flexible film 包装袋 术语和类型 第2部分：热塑性软质薄膜袋 |
China National Standards IC |
English PDF |
| GB/T 15269.1-2010 |
Cigars - Part 1: TechnICal requirements for classification and sampling 雪茄烟 第1部分：产品分类和抽样技术要求 |
China National Standards IC |
English PDF |
| GB/T 12529.5-2010 |
GraphIC symbols and codes for grain and oil industry - Part 5: Storing and handling 粮油工业用图形符号、代号 第5部分：仓储工业 |
China National Standards IC |
English PDF |
| GB 5135.16-2010 |
AutomatIC sprinkler system - Part 16：Flexible sprinkler hose with fittings 自动喷水灭火系统 第16部分：消防洒水软管 |
China National Standards IC |
English PDF |
| GB 25203-2010 |
TechnICal equipments for fire supervision 消防监督技术装备配备 |
China National Standards IC |
English PDF |
| GB 16669-2010 |
General technICal specifications for components of carbon dioxide fire extinguishing systems 二氧化碳灭火系统及部件通用技术条件 |
China National Standards IC |
English PDF |
| GB 16668-2010 |
General technICal specifications for powder extinguishing system and components 干粉灭火系统及部件通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 9442-2010 |
Foundry silICa sand 铸造用硅砂 |
China National Standards IC |
English PDF |
| GB/T 9065.5-2010 |
Connections for hydraulIC fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends 液压软管接头 第5部分：37°扩口端软管接头 |
China National Standards IC |
English PDF |
| GB/T 9065.2-2010 |
Connections for hydraulIC fluid power and general use - Hose fittings - Part 2: Hose fittings with 24° cone connector ends 液压软管接头 第2部分：24°锥密封端软管接头 |
China National Standards IC |
English PDF |
| GB/T 7562-2010 |
SpecifICation of coal used for pulverized coal-fired boiler for power generation 发电煤粉锅炉用煤技术条件 |
China National Standards IC |
English PDF |
| GB/T 7143-2010 |
Methods for chemICal analysis of silica sand for foundry 铸造用硅砂化学分析方法 |
China National Standards IC |
English PDF |
| GB/T 5135.20-2010 |
AutomatIC sprinkler system - Part 20: Coating steel pipe 自动喷水灭火系统 第20部分: 涂覆钢管 |
China National Standards IC |
English PDF |
| GB/T 5135.19-2010 |
AutomatIC sprinkler system - Part 19: Plastic pipe and fittings 自动喷水灭火系统 第19部分：塑料管道及管件 |
China National Standards IC |
English PDF |
| GB/T 25217.2-2010 |
Methods for test，monitoring and prevention of rock burst - Part 2: ClassifICation and laboratory test method on bursting liability of coal 冲击地压测定、监测与防治方法 第2部分：煤的冲击倾向性分类及指数的测定方法 |
China National Standards IC |
English PDF |
| GB/T 25217.1-2010 |
Methods for test, monitoring and prevention of rock burst - Part 1: ClassifICation and laboratory test method on bursting liability of roof strata 冲击地压测定、监测与防治方法 第1部分：顶板岩层冲击倾向性分类及指数的测定方法 |
China National Standards IC |
English PDF |
| GB/T 25216-2010 |
Regional predICtion methods for the danger of coal and gas outburst 煤与瓦斯突出危险性区域预测方法 |
China National Standards IC |
English PDF |
| GB/T 25213-2010 |
Determination of plastIC properties of coal - Constant-torque gieseler plastometer method 煤的塑性测定 恒力矩吉氏塑性仪法 |
China National Standards IC |
English PDF |
| GB/T 25212-2010 |
ClassifICation and quality grading for blue-coke 兰炭产品品种及等级划分 |
China National Standards IC |
English PDF |
| GB/T 25211-2010 |
SpecifICations of blue-coke 兰炭产品技术条件 |
China National Standards IC |
English PDF |
| GB/T 25210-2010 |
SpecifICations of coals for blue-coke 兰炭用煤技术条件 |
China National Standards IC |
English PDF |
| GB/T 25206.2-2010 |
Reaction-to-fire tests for sandwICh panel building systems - Part 2: Test method for large rooms 复合夹芯板建筑体燃烧性能试验 第2部分：大室法 |
China National Standards IC |
English PDF |
| GB/T 25197-2010 |
Welded statIC non-pressurized thermoplastic tanks 静置常压焊接热塑性塑料储罐（槽） |
China National Standards IC |
English PDF |
| GB/T 25195.3-2010 |
Cranes - GraphICal symbols - Part 3: Tower cranes 起重机 图形符号 第3部分：塔式起重机 |
China National Standards IC |
English PDF |
| GB/T 25195.2-2010 |
Cranes - GraphICal symbols - Part 2：Mobile cranes 起重机 图形符号 第2部分：流动式起重机 |
China National Standards IC |
English PDF |
| GB/T 25195.1-2010 |
Cranes - GraphIC symbols - Part 1: General 起重机 图形符号 第1部分：总则 |
China National Standards IC |
English PDF |
| GB/T 25141-2010 |
Self-priming type rotodynamIC pumps - Types and basic parameters 自吸式回转动力泵 型式与基本参数 |
China National Standards IC |
English PDF |
| GB/T 25140-2010 |
Seal-less rotodynamIC pumps - ClassⅡ - Specification 无轴封回转动力泵技术条件（Ⅱ类） |
China National Standards IC |
English PDF |
| GB/T 25139-2010 |
CeramIC foam filter for foundry 铸造用泡沫陶瓷过滤网 |
China National Standards IC |
English PDF |
| GB/T 25134-2010 |
OptICal measurement specification of 3D geometry for forgings/stampings and the dies 锻压制件及其模具三维几何量光学检测规范 |
China National Standards IC |
English PDF |
| GB/T 25133-2010 |
HydraulIC fluid power systems - Assembled systems - Methods of cleaning lines by flushing 液压系统总成 管路冲洗方法 |
China National Standards IC |
English PDF |
| GB/T 25132-2010 |
HydraulIC fluid power - Filters - Test method for differential pressure devices 液压过滤器 压差装置试验方法 |
China National Standards IC |
English PDF |
| GB/T 25127.2-2010 |
Low ambient temperature air source heat pump ( water chilling ) packages - Part2： Heat pump ( water chilling ) packages for household and similar applICation 低环境温度空气源热泵（冷水）机组 第2部分：户用及类似用途的热泵（冷水）机组 |
China National Standards IC |
English PDF |
| Find out:31829Items | To Page of: First -Previous-Next -Last | [190] [191] [192] [193] [194] [195] [196] |
+86-755-25831330
