Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 3804-2017 |
High-voltage alTernating current switches for rated voltage above 3.6 kV and less than 40.5 kV 3.6 kV～40.5 kV高压交流负荷开关 |
China National Standards Te |
 English PDF |
| GB/T 6115.2-2017 |
Series capacitors for power sysTems—Part 2: Protective equipment for series capacitor banks 电力系统用串联电容器 第2部分：串联电容器组用保护设备 |
China National Standards Te |
English PDF |
| GB/T 29024.4-2017 |
DeTermination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces 粒度分析 单颗粒的光学测量方法 第4部分：洁净间光散射尘埃粒子计数器 |
China National Standards Te |
English PDF |
| GB/T 34362-2017 |
Non-destructive Testing—Guide for eddy current testing using conformable sensor arrays 无损检测 适形阵列涡流检测导则 |
China National Standards Te |
English PDF |
| GB/T 34363-2017 |
Non-destructive Testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards Te |
English PDF |
| GB/T 34428.3-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 3：LED changeable message sign 高速公路监控设施通信规程 第3部分：LED可变信息标志 |
China National Standards Te |
English PDF |
| GB/T 34428.1-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 1: Universal rules 高速公路监控设施通信规程 第1部分：通用规程 |
China National Standards Te |
English PDF |
| GB/T 20626.1-2017 |
Specific environmental condition—Electric and electronic products for plaTeau—Part 1:General technical requirements 特殊环境条件 高原电工电子产品 第1部分：通用技术要求 |
China National Standards Te |
English PDF |
| GB/T 1303.5-2017 |
Industrial rigid laminaTed sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins 电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板 |
China National Standards Te |
English PDF |
| GB/T 34428.4-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 4：Weather detector 高速公路监控设施通信规程 第4部分: 气象检测器 |
China National Standards Te |
English PDF |
| GB/T 34428.5-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 5：Tunnel environment detector 高速公路监控设施通信规程 第5部分: 隧道环境检测器 |
China National Standards Te |
English PDF |
| GB/T 34428.2-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 2：Vehicle detector 高速公路监控设施通信规程 第2部分: 车辆检测器 |
China National Standards Te |
English PDF |
| GB/T 34428.6-2017 |
Communication rules of the devices of surveillance and control sysTem for expressway—Part 6：Wall map 高速公路监控设施通信规程 第6部分: 地图板 |
China National Standards Te |
English PDF |
| GB/T 34368-2017 |
Technical requirement for major maintenance of passenger ropeway 客运索道重大修理的技术要求 |
China National Standards Te |
English PDF |
| GB/T 28807.3-2017 |
Railway applications—Compatibility between rolling stock and train deTection systems—Part 3:Compatibility with axle counters 轨道交通 机车车辆和列车检测系统的兼容性 第3部分：与计轴器的兼容性 |
China National Standards Te |
English PDF |
| GB/T 28807.2-2017 |
Railway applications—Compatibility between rolling stock and train deTection systems—Part 2: Compatibility with track circuits 轨道交通 机车车辆和列车检测系统的兼容性 第2部分：与轨道电路的兼容性 |
China National Standards Te |
English PDF |
| GB/T 5019.12-2017 |
Specification for insulating maTerials based on mica— Part 12：Glass fabric backup epoxy dry mica tape with high porosity 以云母为基的绝缘材料 第12部分：高透气性玻璃布补强环氧少胶云母带 |
China National Standards Te |
English PDF |
| GB/T 34570.1-2017 |
Safety for rechargeable batTery packs and chargers for electric tools—Part 1：Safety for rechargeable battery packs 电动工具用可充电电池包和充电器的安全 第1部分：电池包的安全 |
China National Standards Te |
English PDF |
| GB/T 34569-2017 |
Simulation training sysTem for live working 带电作业仿真训练系统 |
China National Standards Te |
English PDF |
| GB/T 34370.1-2017 |
Nondestructive Testing of amusement equipments—Part 1：General requirement 游乐设施无损检测 第1部分：总则 |
China National Standards Te |
English PDF |
| GB/T 34370.5-2017 |
Nondestructive Testing of amusement equipments—Part 5：Ultrasonic testing 游乐设施无损检测 第5部分：超声检测 |
China National Standards Te |
English PDF |
| GB/T 34370.6-2017 |
Nondestructive Testing of amusement equipments—Part 6：Radiographic testing 游乐设施无损检测 第6部分：射线检测 |
China National Standards Te |
English PDF |
| GB/T 34369-2017 |
General Technical conditions for electrical control device of passenger ropeway 客运索道电气装置通用技术条件 |
China National Standards Te |
English PDF |
| GB/T 34370.2-2017 |
Nondestructive Testing of amusement equipments－Part 2:Visual examination 游乐设施无损检测 第2部分：目视检测 |
China National Standards Te |
English PDF |
| GB/T 34370.4-2017 |
Nondestructive Testing of amusement equipments—Part 4：Penetrant testing 游乐设施无损检测 第4部分：渗透检测 |
China National Standards Te |
English PDF |
| GB/T 34370.3-2017 |
Nondestructive Testing of amusement equipments—Part 3：Magnetic particle testing 游乐设施无损检测 第3部分：磁粉检测 |
China National Standards Te |
English PDF |
| GB/T 34570.2-2017 |
Safety for rechargeable batTery packs and chargers for electric tools—Part 2: Safety for chargers 电动工具用可充电电池包和充电器的安全 第2部分：充电器的安全 |
China National Standards Te |
English PDF |
| GB/T 34577-2017 |
Technical guide for by-pass working on distribution line 配电线路旁路作业技术导则 |
China National Standards Te |
English PDF |
| GB/T 34578-2017 |
Technical requirements for operation,maintenance and test of instrumentation and actuating equipment in thermal power plant 火力发电厂热工仪表与执行装置运行维护与试验技术规程 |
China National Standards Te |
English PDF |
| GB/T 34572-2017 |
Railway applications—Current collection sysTem—Pantographs,testing methods for carbon contact strips 轨道交通 受流系统 受电弓碳滑板试验方法 |
China National Standards Te |
English PDF |
| GB/Z 30556.3-2017 |
Electromagnetic compatibility—Installation and mitigation guidelines－HEMP proTection concepts 电磁兼容 安装和减缓导则 高空核电磁脉冲（HEMP）的防护概念 |
China National Standards Te |
English PDF |
| GB/T 14745-2017 |
Test method of creep properties for package cushioning material 包装用缓冲材料蠕变特性试验方法 |
China National Standards Te |
English PDF |
| GB/T 15902-2017 |
Conveyor belts—DeTermination of elastic and permanent elongation and calculation of elastic modulus 输送带 弹性伸长率和永久伸长率的测定及弹性模量的计算 |
China National Standards Te |
English PDF |
| GB/T 3685-2017 |
Conveyor belts—Laboratory scale flammability characTeristics—Test method 输送带 实验室规模的燃烧特性 试验方法 |
China National Standards Te |
English PDF |
| GB/T 34365-2017 |
Non-destructive Testing—Terminology—Terms used in industrial computed tomography testing 无损检测 术语 工业计算机层析成像(CT)检测 |
China National Standards Te |
English PDF |
| GB/T 34408-2017 |
DeTection of bovine, ovine and porcine derived materials in leather by qualitative polymerase chain reaction (PCR) method 天然皮革牛、羊、猪源性成分定性PCR检测方法 |
China National Standards Te |
English PDF |
| GB/T 34580-2017 |
Standard Test method for measurement of lubricant generated insoluble color bodies in in-service turbine oils—Membrane patch colorimetry 运行涡轮机油中不溶有色物质的测定方法 膜片比色法 |
China National Standards Te |
English PDF |
| GB/T 34579-2017 |
Methods of measurement and limits for radiaTed disturbances from plasma display panel equipment in the frequency range 150kHz to 30MHz 等离子显示设备150kHz～30MHz辐射骚扰限值和测量方法 |
China National Standards Te |
English PDF |
| GB/T 34582-2017 |
Single cell and stack performance Test methods for solid oxide fuel cells (SOFC) 固体氧化物燃料电池单电池和电池堆性能试验方法 |
China National Standards Te |
English PDF |
| GB/T 34581-2017 |
General Technical requirements for photovoltaic system DC circuit breakers 光伏系统用直流断路器通用技术要求 |
China National Standards Te |
English PDF |
| GB/T 16563-2017 |
Series 1 freight containers—Specification and Testing—Tank containers for liquids, gases and pressurized dry bulk 系列1集装箱 技术要求和试验方法 液体、气体及加压干散货罐式集装箱 |
China National Standards Te |
English PDF |
| GB/T 4698.20-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 4：DeTermination of manganese content—Potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第4部分：锰量的测定 高碘酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 13747.15-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 15：DeTermination of boron content—Curcumin spectrophotometry 锆及锆合金化学分析方法 第15部分：硼量的测定 姜黄素分光光度法 |
China National Standards Te |
English PDF |
| GB/T 4698.19-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 19：DeTermination of molybdenum content—Thiocyanate-differential spectrophotometry 海绵钛、钛及钛合金化学分析方法 第19部分：钼量的测定 硫氰酸盐示差光度法 |
China National Standards Te |
English PDF |
| GB/T 4698.5-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 5：DeTermination of molybdenum content—Thiocyanate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第5部分：钼量的测定 硫氰酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 13747.21-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 21：DeTermination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method 锆及锆合金化学分析方法 第21部分：氢量的测定 惰气熔融红外吸收法/热导法 |
China National Standards Te |
English PDF |
| GB/T 13747.8-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 8：DeTermination of cobalt content—Nitroso-R-salt spectrophotometry 锆及锆合金化学分析方法 第8部分：钴量的测定 亚硝基R盐分光光度法 |
China National Standards Te |
English PDF |
| GB/T 34573-2017 |
Railway applications—MasTer controller 轨道交通 司机控制器 |
China National Standards Te |
English PDF |
| GB/T 15022.8-2017 |
Resin based reactive compounds used for electrical insulation— Part 8：Epoxy modified unsaturaTed polyester vacuum pressure impregnation (VPI) resin 电气绝缘用树脂基活性复合物 第8部分：环氧改性不饱和聚酯真空压力浸渍(VPI)树脂 |
China National Standards Te |
English PDF |
| GB/T 311.3-2017 |
Insulation co-ordination—Part 3: Procedures for high-voltage direct current (HVDC) converTer stations 绝缘配合 第3部分：高压直流换流站绝缘配合程序 |
China National Standards Te |
English PDF |
| GB/T 34576-2017 |
Specifications for sTeam turbine used in gas-steam combined-cycle unit 燃气-蒸汽联合循环用汽轮机规范 |
China National Standards Te |
English PDF |
| GB/T 34407-2017 |
Test method for the wall thickness of plastic pipes by ultrasonic 塑料管道壁厚超声波检测方法 |
China National Standards Te |
English PDF |
| GB/T 1819.17-2017 |
Methods for chemical analysis of tin concentraTes—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method 锡精矿化学分析方法 第17部分：汞量的测定 原子荧光光谱法 |
China National Standards Te |
English PDF |
| GB/T 1819.15-2017 |
Methods for chemical analysis of tin concentraTes—Part 15：Determination of fluorine content—The ion-selective electrode method 锡精矿化学分析方法 第15部分：氟量的测定 离子选择电极法 |
China National Standards Te |
English PDF |
| GB/T 20897.3-2017 |
Inflatable boats—Part3: Boats with a maximum motor power rating of 15 kW and greaTer 充气艇 第3部分：发动机最大额定功率为15 kW及以上的艇 |
China National Standards Te |
English PDF |
| GB/T 6883-2017 |
CemenTed carbide sintering body for wire, bar or tube drawing dies—Dimensions 线、棒、管拉模用硬质合金烧结品 尺寸 |
China National Standards Te |
English PDF |
| GB/T 13747.11-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 11: DeTermination of molybdenum content—Thiocyanate spectrophotometry 锆及锆合金化学分析方法 第11部分：钼量的测定 硫氰酸盐分光光度法 |
China National Standards Te |
English PDF |
| GB/T 1819.7-2017 |
Methods for chemical analysis of tin concentraTes—Part 7:Determination of bismuth content—Flame atomic absorption spectrometric method 锡精矿化学分析方法 第7部分：铋量的测定 火焰原子吸收光谱法 |
China National Standards Te |
English PDF |
| GB/T 34643-2017 |
SinTered metal porous materials—Determination of air filter permeability 烧结金属多孔材料 气体过滤性能的测定 |
China National Standards Te |
English PDF |
| GB/T 34647-2017 |
Temper designation system for titanium and titanium alloy 钛及钛合金产品状态代号 |
China National Standards Te |
English PDF |
| GB/T 34646-2017 |
SinTered metal membrane filter materials and elements 烧结金属膜过滤材料及元件 |
China National Standards Te |
English PDF |
| GB/T 6886-2017 |
SinTered stainless steel filter elements 烧结不锈钢过滤元件 |
China National Standards Te |
English PDF |
| GB/T 3250-2017 |
Shearing and riveting Test method of wires and rods for the aluminum and aluminum-alloy rivets 铝及铝合金铆钉用线材和棒材剪切与铆接试验方法 |
China National Standards Te |
English PDF |
| GB/T 34649-2017 |
Magnetron sputTering ruthenium target 磁控溅射用钌靶 |
China National Standards Te |
English PDF |
| GB/T 34630.1-2017 |
Friction stir welding—Aluminium and its alloys—Part 1：Terminology and definition 搅拌摩擦焊 铝及铝合金 第1部分：术语及定义 |
China National Standards Te |
English PDF |
| GB/T 4698.8-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 8：DeTermination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第8部分：铝量的测定 碱分离-EDTA络合滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 13747.13-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 13: DeTermination of lead content—Polarography 锆及锆合金化学分析方法 第13部分：铅量的测定 极谱法 |
China National Standards Te |
English PDF |
| GB/T 34374-2017 |
Stamping dies—L-shaped guide plaTes 冲模 L形导板 |
China National Standards Te |
English PDF |
| GB/T 14449-2017 |
Test method for aerosol products 气雾剂产品测试方法 |
China National Standards Te |
English PDF |
| GB/T 34629-2017 |
Conveyor belts—DeTermination of minimum pulley diameters 输送带 最小滚筒直径的确定 |
China National Standards Te |
English PDF |
| GB/T 1819.13-2017 |
Methods for chemical analysis of tin concentraTes—Part 13: Determination of magnesium oxide content,calcium oxide content—Flame atomic absorption spectrometric method 锡精矿化学分析方法 第13部分：氧化镁、氧化钙量的测定 火焰原子吸收光谱法 |
China National Standards Te |
English PDF |
| GB/T 34641-2017 |
Non-destructive Testing—Test method for determining image quality in direct thermal neutron radiographic examination 无损检测 直接热中子照相检测的像质测定方法 |
China National Standards Te |
English PDF |
| GB/T 34644-2017 |
Eddy current Testing method for zirconium and zirconium alloy tube 锆及锆合金管材涡流检测方法 |
China National Standards Te |
English PDF |
| GB/T 34645-2017 |
Contractile strain ratio Testing of metal materials tubing 金属管材收缩应变比试验方法 |
China National Standards Te |
English PDF |
| GB/T 34638-2017 |
Non-destructive Testing—Test methods for ultrasonic leak detection 无损检测 超声泄漏检测方法 |
China National Standards Te |
English PDF |
| GB/T 18916.32-2017 |
Norm of waTer intake—Part 32：Iron ore mineral processing 取水定额 第32部分：铁矿选矿 |
China National Standards Te |
English PDF |
| GB/T 1819.8-2017 |
Methods for chemical analysis of tin concentraTes—Part 8：Determination of zinc content—Flame atomic absorption spectrometric method 锡精矿化学分析方法 第8部分：锌量的测定 火焰原子吸收光谱法 |
China National Standards Te |
English PDF |
| GB/T 4698.18-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 18：DeTermination of tin content—Flame atomic absorption spectrometry 海绵钛、钛及钛合金化学分析方法 第18部分：锡量的测定 火焰原子吸收光谱法 |
China National Standards Te |
English PDF |
| GB/T 4698.24-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 24：DeTermination of nickel content—Dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第24部分：镍量的测定 丁二酮肟分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 1819.10-2017 |
Methods for chemical analysis of tin concentraTes—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method 锡精矿化学分析方法 第10部分：硫量的测定 高频感应炉燃烧红外吸收法和碘酸钾滴定法 |
China National Standards Te |
English PDF |
| GB/T 4698.9-2017 |
Methods for chemical analysis of titanium sponge,titanium and titanium alloys—Part 9：DeTermination of tin content—Potassium iodate titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第9部分：锡量的测定 碘酸钾滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 18690.3-2017 |
Agricultural irrigation equipment—FilTers for microirrigation—Part 3:Automatic flushing strainer-type filters and disc filters 农业灌溉设备 微灌用过滤器 第3部分：自动冲洗网式过滤器和叠片式过滤器 |
China National Standards Te |
English PDF |
| GB/T 34618-2017 |
Temperature detection method for judging internal leakage faults of working valves in steam drainage steam 蒸汽疏水系统在线阀门内漏温度检测方法 |
China National Standards Te |
English PDF |
| GB/T 6243-2017 |
Rice transplanTer—Test method 水稻插秧机 试验方法 |
China National Standards Te |
English PDF |
| GB/T 34619-2017 |
Test method for volumetric flow of positive displacement refrigerant compressors 容积式制冷剂压缩机容积流量试验方法 |
China National Standards Te |
English PDF |
| GB/T 34620-2017 |
CaTegory Ⅰ lithium bromide absorption heat pump unit 第一类溴化锂吸收式热泵机组 |
China National Standards Te |
English PDF |
| GB/T 18690.2-2017 |
Agricultural irrigation equipment—FilTers for microirrigation—Part 2: Strainer-type filters and disc filters 农业灌溉设备 微灌用过滤器 第2部分：网式过滤器和叠片式过滤器 |
China National Standards Te |
English PDF |
| GB/T 10942-2017 |
RefrigeraTed bulk milk tanks 散装乳冷藏罐 |
China National Standards Te |
English PDF |
| GB/T 30475.4-2017 |
FilTers for compressed air—Test methods—Part 4: Water 压缩空气过滤器 试验方法 第4部分：水 |
China National Standards Te |
English PDF |
| GB/T 34637-2017 |
Non-destructive Testing—Test methods for bubble leak detection 无损检测 气泡泄漏检测方法 |
China National Standards Te |
English PDF |
| GB/T 34443-2017 |
Terminology of artificial leather and synthetic leather 人造革与合成革术语 |
China National Standards Te |
English PDF |
| GB/T 34445-2017 |
Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material 热塑性塑料及其复合材料热封面热粘性能测定 |
China National Standards Te |
English PDF |
| GB/T 3325-2017 |
General Technical requirements for metal furniture 金属家具通用技术条件 |
China National Standards Te |
English PDF |
| GB/T 19362.2-2017 |
Test conditions for bridge-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines 龙门铣床检验条件 精度检验 第2部分：龙门移动式铣床 |
China National Standards Te |
English PDF |
| GB/T 4678.8-2017 |
Diecasting dies—Components—Part 8: Ejector plaTe 压铸模 零件 第8部分：推板 |
China National Standards Te |
English PDF |
| GB/T 19498-2017 |
ProTective structures on agricultural and forestry tractors—Static testing method and accepting condition 农林拖拉机防护装置 静态试验方法和验收技术条件 |
China National Standards Te |
English PDF |
| GB/T 1479.3-2017 |
Metallic powders－DeTermination of apparent density－Part 3: Oscillating funnel method 金属粉末 松装密度的测定 第3部分：振动漏斗法 |
China National Standards Te |
English PDF |
| GB/T 13747.14-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 14：DeTermination of uranium content—Polarography 锆及锆合金化学分析方法 第14部分：铀量的测定 极谱法 |
China National Standards Te |
English PDF |
| GB/T 13747.19-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part19：DeTermination of titanium content—Diantipyrylmethane spectrophotometry and the inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第19部分：钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards Te |
English PDF |
| GB/T 13747.16-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 16：DeTermination of chloric content—Silver chloride nephelometry and ion selective electrode method 锆及锆合金化学分析方法 第16部分：氯量的测定 氯化银浊度法和离子选择性电极法 |
China National Standards Te |
English PDF |
| Find out:37203Items | To Page of: First -Previous-Next -Last | [107] [108] [109] [110] [111] [112] [113] |
+86-755-25831330
