GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 12538-2003 |
Road Vehicles with two axles--Determination of centre of gravity 两轴道路车辆 重心位置的测定 |
China National Standards V |
English PDF |
GB/T 19226-2003 |
Determination of Vanadium in coal 煤中钒的测定方法 |
China National Standards V |
English PDF |
GB/T 19224-2003 |
Determining the relatiVe degree of oxidation inbituminous coal 烟煤相对氧化度测定方法 |
China National Standards V |
English PDF |
GB 19217-2003 |
Technical standard for medical waste transport Vehicle 医疗废物转运车技术要求(试行) |
China National Standards V |
English PDF |
GB 19210-2003 |
Cleaning code for air duct system in heating,Ventilating and air-conditioning systems 空调通风系统清洗规范 |
China National Standards V |
English PDF |
GB 18240.1-2003 |
Fiscal cash register--Part 1: Specification of deVice 税控收款机 第1部分:机器规范 |
China National Standards V |
English PDF |
GB/T 19216.21-2003 |
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated Voltage up to and including 0.6/1.0kV 在火焰条件下电缆或光缆的线路完整性试验 第21部分:试验步骤和要求 额定电压0.6/1.0 kV及以下电缆 |
China National Standards V |
English PDF |
GB/T 1001.1-2003 |
Insulators for oVerhead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions,test methods and acceptance criteria 标称电压高于1000V的架空线路绝缘子 第1部分:交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则 |
China National Standards V |
English PDF |
GB/T 17006.9-2003 |
EValuation and routine testing in medical imaging departments--Part 2-10: Constancy tests--X-ray equipment for mammography 医用成像部门的评价及例行试验 第2-10部分:稳定性试验 乳腺X射线摄影设备 |
China National Standards V |
English PDF |
GB/T 17006.8-2003 |
EValuation and routine testing in medical imaging departments--Part 2-9: Constancy tests--Equipment for indirect radioscopy and indirect radiography 医用成像部门的评价及例行试验 第2-9部分: 稳定性试验 间接透视和间接摄影X射线设备 |
China National Standards V |
English PDF |
GB/T 17006.7-2003 |
EValuation and routine testing in medical imaging departments--Part 2-7: Constancy tests--Equipment for intra-oral dental radiography excluding dental panoramic equipment 医用成像部门的评价及例行试验 第2-7部分: 稳定性试验 口内牙科X射线摄影设备不包括牙科全景设备 |
China National Standards V |
English PDF |
GB/T 17006.10-2003 |
EValuation and routine testing in medical imaging departments--Part 2-11: Constancy tests--Equipment for general direct radiography 医用成像部门的评价及例行试验 第2-11部分:稳定性试验 普通直接摄影X射线设备 |
China National Standards V |
English PDF |
GB/T 7755-2003 |
Rubber,Vulcanized of thermoplastic--Determination of permeability to gases 硫化橡胶或热塑性橡胶 透气性的测定 |
China National Standards V |
English PDF |
GB/T 19200-2003 |
Diagnostic techniques for swine Vesicular disease 猪水泡病诊断技术 |
China National Standards V |
English PDF |
GB/T 8098-2003 |
Hydraulic fluid power--Compensated flow control Valves--Mounting surfaces 液压传动 带补偿的流量控制阀 安装面 |
China National Standards V |
English PDF |
GB 19191-2003 |
Food additiVe--Natural vitamin E 食品添加剂 天然维生素E |
China National Standards V |
English PDF |
GB 7542-2003 |
Rubber brake hoses for railway locomotiVe and car 铁路机车车辆制动用橡胶软管 |
China National Standards V |
English PDF |
GB 2023-2003 |
Food additiVe--Lactic acid 食品添加剂 乳酸 |
China National Standards V |
English PDF |
GB 1907-2003 |
Food additiVe--Sodium nitrite 食品添加剂 亚硝酸钠 |
China National Standards V |
English PDF |
GB/T 4999-2003 |
Anaesthetic and respiratory equipment--Vocabulary 麻醉呼吸设备 术语 |
China National Standards V |
English PDF |
GB/T 19184-2003 |
CaVitation pitting evaluation in Pelton turbines 水斗式水轮机空蚀评定 |
China National Standards V |
English PDF |
GB/T 1094.10-2003 |
Power transformers--Part 10: Determination of sound leVels 电力变压器 第10部分:声级测定 |
China National Standards V |
English PDF |
GB/T 19180-2003 |
Diagnostic techniques for boVine spongiform encephalopathy 牛海绵状脑病诊断技术 |
China National Standards V |
English PDF |
GB 19149-2003 |
Transformers for tubular discharge lamps haVing a no-load output voltage exceeding 1000V(generally called neon-transformers)--General and safety requirements 空载输出电压超过1000V的管形放电灯用变压器(霓虹灯变压器)的一般要求和安全要求 |
China National Standards V |
English PDF |
GB 1094.3-2003 |
Power transformers--Part 3: Insulation leVels,dielectric tests and external clearances in air 电力变压器 第3部分: 绝缘水平、绝缘试验和外绝缘空气间隙 |
China National Standards V |
English PDF |
GB/T 18755.2-2003 |
Industrial automation systems and integration--Manufacturing Automation Programming EnVironment (MAPLE)--Part 2: Services and interfaces 工业自动化系统与集成 制造自动化编程环境(MAPLE) 第2部分: 服务与接口 |
China National Standards V |
English PDF |
GB/T 16273.6-2003 |
Graphical symbols for use on equipment--Part 6: Common symbols for conVeying,vehicle testing and loading machine 设备用图形符号 第6部分: 运输、车辆检测及装载机械通用符号 |
China National Standards V |
English PDF |
GB 19151-2003 |
Warning triangles for motor Vehicle 机动车用三角警告牌 |
China National Standards V |
English PDF |
GB/T 24015-2003 |
EnVironmental management--Environmental assessment of sites and organizations(EASO) 环境管理 现场和组织的环境评价(EASO) |
China National Standards V |
English PDF |
GB/T 2516-2003 |
General purpose metric screw threads--Limit deViations 普通螺纹 极限偏差 |
China National Standards V |
English PDF |
GB/T 19136-2003 |
Testing method for the storage stability at eleVated temperature of pesticides 农药热贮稳定性测定方法 |
China National Standards V |
English PDF |
GB/T 6072.5-2003 |
Reciprocating internal combustion engines--Performance--Part 5: Torsional Vibrations 往复式内燃机 性能 第5部分: 扭转振动 |
China National Standards V |
English PDF |
GB/T 4672-2003 |
Reciprocating internal combustion engines--Hand-operated control deVices--Standard direction of motion 往复式内燃机 手操纵控制机构 标准动作方向 |
China National Standards V |
English PDF |
GB/T 19127-2003 |
Agricultural Vehicles--Vehicle identificationcode 农用运输车 车辆识别标识 |
China National Standards V |
English PDF |
GB/T 19115.2-2003 |
Off-grid type wind-solar photoVoltaic hybrid generate electricity system of household-use--Part 2: Test methods 离网型户用风光互补发电系统 第2部分: 试验方法 |
China National Standards V |
English PDF |
GB/T 19115.1-2003 |
Off-grid type wind-solar photoVoltaic hybrid generate electricity system of household-use--Part 1: Technology condition 离网型户用风光互补发电系统 第1部分:技术条件 |
China National Standards V |
English PDF |
GB/T 6160-2003 |
Micrographics--First generation silVer-gelatin microforms of source documents--Density specifications and method of measurement 缩微摄影技术 源文件第一代银--明胶型缩微品密度规范与测量方法 |
China National Standards V |
English PDF |
GB/T 6159.8-2003 |
Micrographics--Vocabulary--Part 8: Use 缩微摄影技术 词汇 第8部分:应用 |
China National Standards V |
English PDF |
GB/T 6159.6-2003 |
Micrographics--Vocabulary--Part 6: Equipment 缩微摄影技术 词汇 第6部分: 设备 |
China National Standards V |
English PDF |
GB/T 19114.1-2003 |
Industrial automation systems and integration--Industrial manufacturing management data--Part 1:General oVerview 工业自动化系统与集成 工业制造管理数据 第1部分:综述 |
China National Standards V |
English PDF |
GB/T 4459.4-2003 |
Mechanical drawings--ConVentional reprensentationof springs 机械制图 弹簧表示法 |
China National Standards V |
English PDF |
GB/T 4459.2-2003 |
Mechanical drawings--ConVentional representation of gears 机械制图 齿轮表示法 |
China National Standards V |
English PDF |
GB/T 19096-2003 |
Technical drawing--Drawing presentation--Vocabu-lary and indications for edges of undefined shape 技术制图 图样画法 未定义形状边的术语和注法 |
China National Standards V |
English PDF |
GB 19085-2003 |
Requirement to protect contagious from business and serVice industry environment 商业、服务业经营场所传染性疾病预防措施 |
China National Standards V |
English PDF |
GB/T 19094-2003 |
Coal preparation plant--Principles and conVentions for flow sheets 选煤厂 流程图原则和规定 |
China National Standards V |
English PDF |
GB 9656-2003 |
Safety glazing materials for road Vehicles 汽车安全玻璃 |
China National Standards V |
English PDF |
GB 17269-2003 |
Safety regulation for the preVention and protection of dust explosion in manufacturing powder of aluminum and/or magnesium 铝镁粉加工粉尘防爆安全规程 |
China National Standards V |
English PDF |
GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface haVing stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards V |
English PDF |
GB/T 8243.4-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulatiVe efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) |
China National Standards V |
English PDF |
GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to eleVated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards V |
English PDF |
GB/T 8243.2-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass Valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 |
China National Standards V |
English PDF |
GB/T 19075-2003 |
Industrial fans--Vocabulary and definitionsof categories 工业通风机 词汇及种类定义 |
China National Standards V |
English PDF |
GB/T 19055-2003 |
Reliability test methods for motor Vehicle engines 汽车发动机可靠性试验方法 |
China National Standards V |
English PDF |
GB 19058-2003 |
EnVironmental protection technological regulation on the entire process for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器全过程环境保护技术规定(试行) |
China National Standards V |
English PDF |
GB/T 4129-2003 |
Acoustics--Requirements for the performance and calibration of reference sound sources used for the determination of sound power leVels 声学 用于声功率级测定的标准声源的性能与校准要求 |
China National Standards V |
English PDF |
GB/T 11684-2003 |
Electromagnetic enVironment conditions and testing procedures for nuclear instrumentation 核仪器电磁环境条件与试验方法 |
China National Standards V |
English PDF |
GB/T 15000.8-2003 |
DirectiVes for the work of reference materials(8)--Uses of certified reference materials 标准样品工作导则(8) 有证标准样品的使用 |
China National Standards V |
English PDF |
GB/T 15000.4-2003 |
DirectiVes for the work of reference materials(4)--Contents of certificates and labels 标准样品工作导则(4) 标准样品证书和标签的内容 |
China National Standards V |
English PDF |
GB/T 8196-2003 |
Safety ofmachinery--Guards--General requirements for the design and construction of fixed and moVable guards 机械安全 防护装置 固定式和活动式防护装置设计与制造一般要求 |
China National Standards V |
English PDF |
GB/T 11197-2003 |
Standard for marine radio communication Vocabulary 海上船舶无线电通话标准用语 |
China National Standards V |
English PDF |
GB/T 13877.5-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure enVironment--Part 5: Pressurization system test method 农林拖拉机和自走式机械封闭驾驶室 第5部分: 空气压力调节系统试验方法 |
China National Standards V |
English PDF |
GB/T 13877.4-2003 |
Tractorsand self-propelled machines for agriculture and forestry--Operator enclosure enVironment--Part 4: Air filter element test method 农林拖拉机和自走式机械封闭驾驶室 第4部分: 空气滤清器试验方法 |
China National Standards V |
English PDF |
GB/T 13877.3-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure enVironment--Part 3: Determination of effect of solar heating 农林拖拉机和自走式机械封闭驾驶室 第3部分: 太阳能加热系统效率的确定 |
China National Standards V |
English PDF |
GB/T 13877.2-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure enVironment--Part 2: Heating,ventilation and air-conditioning test method and performance 农林拖拉机和自走式机械封闭驾驶室 第2部分: 采暖、通风和空调系统试验方法和性能要求 |
China National Standards V |
English PDF |
GB/T 13877.1-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure enVironment--Part 1: Vocabulary 农林拖拉机和自走式机械封闭驾驶室 第1部分:词汇 |
China National Standards V |
English PDF |
GB/T 10574.7-2003 |
Methods for chemical analysis of tin-lead solders--Determination of silVer content 锡铅焊料化学分析方法 银量的测定 |
China National Standards V |
English PDF |
GB/T 10574.13-2003 |
Methods for chemical analysis of tin-lead solders--Determination of copper,iron,cadmium,silVer,gold,arsenic,zinc,aluminium,bismuth,phosphorous content 锡铅焊料化学分析方法 铜、铁、镉、银、金、砷、锌、铝、铋、磷量的测定 |
China National Standards V |
English PDF |
GB/T 18998.3-2003 |
Chlorinated poly(Vinyl chloride)(PVC-C) piping systems for industrial applications--Part 3: Fittings 工业用氯化聚氯乙烯(PVC-C)管道系统 第3部分: 管件 |
China National Standards V |
English PDF |
GB/T 18998.2-2003 |
Chlorinated poly(Vinyl chloride)(PVC-C) piping systems for industrial applications--Part 2: Pipes 工业用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards V |
English PDF |
GB/T 18998.1-2003 |
Chlorinated poly(Vinyl chloride)(PVC-C) piping systems for industrial applications--Part 1: General 工业用氯化聚氯乙烯(PVC-C)管道系统 第1部分:总则 |
China National Standards V |
English PDF |
GB/T 18997.1-2003 |
Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe oVerlap-welded by aluminum pipe 铝塑复合压力管 第1部分:铝管搭接焊式铝塑管 |
China National Standards V |
English PDF |
GB/T 18996-2003 |
Determination of silVer in silver jewellery alloys--Volumertic(potentiometric) method using sodium chloride or potassium chloride 银合金首饰中含银量的测定 氯化钠或氯化钾容量法(电位滴定法) |
China National Standards V |
English PDF |
GB/T 16857.4-2003 |
Geometrical Product Specifications(GPS)--Acceptance andreVerification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机 |
China National Standards V |
English PDF |
GB/T 12472-2003 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their Values for wooden pieces 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值 |
China National Standards V |
English PDF |
GB 18985-2003 |
Amount of supply gases for diVers 潜水员供气量 |
China National Standards V |
English PDF |
GB/T 8804.2-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(Vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards V |
English PDF |
GB/T 6111-2003 |
Thermoplastics pipes for the conVeyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards V |
English PDF |
GB/T 18993.3-2003 |
Chlorinated poly(Vinyl chloride) piping systems for hot and cold water installations--Part 3: Fittings 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第3部分: 管件 |
China National Standards V |
English PDF |
GB/T 18993.2-2003 |
Chlorinated poly(Vinyl chloride) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards V |
English PDF |
GB/T 18993.1-2003 |
Chlorinated poly(Vinyl chloride) piping system for hot and cold water installations--Part 1: General 冷热水用氯化聚氯乙烯(PVC-C) 管道系统 第1部分:总则 |
China National Standards V |
English PDF |
GB/T 18987-2003 |
Radiotherapy equipment--Coordinates,moVements and scales 放射治疗设备 坐标系、运动与刻度 |
China National Standards V |
English PDF |
GB/T 16886.5-2003 |
Biological eValuation ofmedical devices--Part 5: Test for in vitro cytotoxicity 医疗器械生物学评价 第5部分: 体外细胞毒性试验 |
China National Standards V |
English PDF |
GB/T 16886.4-2003 |
Biological eValuation of medical devices--Part 4:Selection of tests for interactions with blood 医疗器械生物学评价 第4部分: 与血液相互作用试验选择 |
China National Standards V |
English PDF |
GB/T 16886.15-2003 |
Biological eValuation of medical devices--Part 15:Identification and quantification of degradation products from metals and alloys 医疗器械生物学评价 第15部分:金属与合金降解产物的定性与定量 |
China National Standards V |
English PDF |
GB/T 16886.14-2003 |
Biological eValuation of medical devices--Part 14:Identification and quantification of degradation products from ceramics 医疗器械生物学评价 第14部分:陶瓷降解产物的定性与定量 |
China National Standards V |
English PDF |
GB/T 18984-2003 |
Seamless steel tubes for low-temperature-serVicepiping 低温管道用无缝钢管 |
China National Standards V |
English PDF |
GB/T 18973-2003 |
Classification and eValuation of tourism toilets 旅游厕所质量等级的划分与评定 |
China National Standards V |
English PDF |
GB/T 18972-2003 |
Classification,inVestigation and evaluation of tourism resources 旅游资源分类、调查与评价 |
China National Standards V |
English PDF |
GB/T 18970-2003 |
Feed additiVe--10% 4,4′-diketo-β-carotene(10% canthaxanthin) 饲料添加剂 10%β,β-胡萝卜-4,4-二酮(10%斑蝥黄) |
China National Standards V |
English PDF |
GB/Z 18039.5-2003 |
Electromagnetic compatibility--EnVironment--Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 电磁兼容 环境 公用供电系统低频传导骚扰及信号传输的电磁环境 |
China National Standards V |
English PDF |
GB/Z 17625.6-2003 |
Electromagnetic compatibility--Limits--Limitation of emission of harmonic currents in low-Voltage power supply systems for equipment with rated current greater than 16A 电磁兼容 限值 对额定电流大于16A的设备在低压供电系统中产生的谐波电流的限制 |
China National Standards V |
English PDF |
GB/T 18978.1-2003 |
Ergonomic requirements for office work with Visual display terminals (VDTs)--Part 1: Generalintroduction 使用视觉显示终端(VDTs)办公的人类工效学要求 第1部分:概述 |
China National Standards V |
English PDF |
GB/T 18977-2003 |
Ergonomics of the thermal enVironment--Assessment of the influence of the thermal environment usingsubjective judgement scales 热环境人类工效学 使用主观判定量表评价热环境的影响 |
China National Standards V |
English PDF |
GB/T 18976-2003 |
Human-centred design processes for interactiVe systems 以人为中心的交互系统设计过程 |
China National Standards V |
English PDF |
GB/T 18975.1-2003 |
Industrial automation systems and integration--Integration of life-cycle data for process plants including oil and gas production facilities--Part 1: OVerview and fundamental principles 工业自动化系统与集成 流程工厂(包括石油和天然气生产设施)生命周期数据集成 第1部分:综述与基本原理 |
China National Standards V |
English PDF |
GB/T 18039.4-2003 |
Electromagnetic compatibility--EnVironment--Compatibility levels in industrial plants for low-frequency conducted disturbances 电磁兼容 环境 工厂低频传导骚扰的兼容水平 |
China National Standards V |
English PDF |
GB/T 18039.3-2003 |
Electromagnetic compatibility--EnVironment--Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems 电磁兼容 环境 公用低压供电系统低频传导骚扰及信号传输的兼容水平 |
China National Standards V |
English PDF |
GB/T 17799.2-2003 |
Electromagnetic compatibility--Generic standards--Immunity for industrial enVironments 电磁兼容 通用标准 工业环境中的抗扰度试验 |
China National Standards V |
English PDF |
GB/T 13870.3-2003 |
Effects of current on human beings and liVestock--Part 3: Effects of currents passing through the body of livestock 电流对人和家畜的效应 第3部分: 电流通过家畜躯体的效应 |
China National Standards V |
English PDF |
GB 16895.20-2003 |
Electrical installations of buildings--Part 5: Selection and erection of electrical equipment--Chapter 55: Other equipment--Section 551: Low-Voltage generating sets 建筑物电气装置 第5部分:电气设备的选择和安装 第55章:其他设备 第551节:低压发电设备 |
China National Standards V |
English PDF |
Find out:20103Items | To Page of: First -Previous-Next -Last | [174] [175] [176] [177] [178] [179] [180] |